| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1436990540-23354-1-git-send-email-bjorn.andersson@sonymobile.com>
Date: Wed, 15 Jul 2015 13:02:20 -0700
From: Bjorn Andersson <bjorn.andersson@...ymobile.com>
To: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Bryan Wu <cooloney@...il.com>,
Richard Purdie <rpurdie@...ys.net>,
Jacek Anaszewski <j.anaszewski@...sung.com>,
Jingoo Han <jingoohan1@...il.com>,
Lee Jones <lee.jones@...aro.org>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Tomi Valkeinen <tomi.valkeinen@...com>
CC: Rob Clark <robdclark@...il.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-leds@...r.kernel.org>,
<linux-fbdev@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>
Subject: [PATCH] backlight: pm8941-wled: Move PM8941 WLED driver to backlight
The Qualcomm PM8941 WLED block is used for backlight and should therefor
be in the backlight framework and not in the LED framework. This moves
the driver and adapts to the backlight api instead.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...ymobile.com>
---
.../devicetree/bindings/leds/leds-pm8941-wled.txt | 5 +-
drivers/leds/Kconfig | 8 ---
drivers/leds/Makefile | 1 -
drivers/video/backlight/Kconfig | 8 +++
drivers/video/backlight/Makefile | 1 +
.../backlight/pm8941-wled.c} | 59 ++++++++++------------
6 files changed, 36 insertions(+), 46 deletions(-)
rename drivers/{leds/leds-pm8941-wled.c => video/backlight/pm8941-wled.c} (90%)
diff --git a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
index a85a964d61f5..424f8444a6cd 100644
--- a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
+++ b/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
@@ -5,10 +5,7 @@ Required properties:
- reg: slave address
Optional properties:
-- label: The label for this led
- See Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger: Default trigger assigned to the LED
- See Documentation/devicetree/bindings/leds/common.txt
+- label: The name of the backlight device
- qcom,cs-out: bool; enable current sink output
- qcom,cabc: bool; enable content adaptive backlight control
- qcom,ext-gen: bool; use externally generated modulator signal to dim
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9ad35f72ab4c..b8d4b965ca2a 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -578,14 +578,6 @@ config LEDS_VERSATILE
This option enabled support for the LEDs on the ARM Versatile
and RealView boards. Say Y to enabled these.
-config LEDS_PM8941_WLED
- tristate "LED support for the Qualcomm PM8941 WLED block"
- depends on LEDS_CLASS
- select REGMAP
- help
- This option enables support for the 'White' LED block
- on Qualcomm PM8941 PMICs.
-
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 8d6a24a2f513..abe96d960ebe 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -63,7 +63,6 @@ obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
-obj-$(CONFIG_LEDS_PM8941_WLED) += leds-pm8941-wled.o
obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
# LED SPI Drivers
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 0505b796d743..6c67c5430933 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -299,6 +299,14 @@ config BACKLIGHT_TOSA
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its backlight
+config BACKLIGHT_PM8941_WLED
+ tristate "Qualcomm PM8941 WLED Driver"
+ depends on LEDS_CLASS
+ select REGMAP
+ help
+ If you have the Qualcomm PM8941, say Y to enable a driver for the
+ WLED block.
+
config BACKLIGHT_SAHARA
tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
depends on X86
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index d67073f9d421..16ec534cff30 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o
obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
+obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o
obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
diff --git a/drivers/leds/leds-pm8941-wled.c b/drivers/video/backlight/pm8941-wled.c
similarity index 90%
rename from drivers/leds/leds-pm8941-wled.c
rename to drivers/video/backlight/pm8941-wled.c
index bf64a593fbf1..4f5ae95331a1 100644
--- a/drivers/leds/leds-pm8941-wled.c
+++ b/drivers/video/backlight/pm8941-wled.c
@@ -11,7 +11,7 @@
*/
#include <linux/kernel.h>
-#include <linux/leds.h>
+#include <linux/backlight.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -76,30 +76,29 @@ struct pm8941_wled_config {
};
struct pm8941_wled {
+ const char *name;
struct regmap *regmap;
u16 addr;
- struct led_classdev cdev;
-
struct pm8941_wled_config cfg;
};
-static int pm8941_wled_set(struct led_classdev *cdev,
- enum led_brightness value)
+static int pm8941_wled_update_status(struct backlight_device *bl)
{
- struct pm8941_wled *wled;
+ struct pm8941_wled *wled = bl_get_data(bl);
+ u16 val = bl->props.brightness;
u8 ctrl = 0;
- u16 val;
int rc;
int i;
- wled = container_of(cdev, struct pm8941_wled, cdev);
+ if (bl->props.power != FB_BLANK_UNBLANK ||
+ bl->props.fb_blank != FB_BLANK_UNBLANK ||
+ bl->props.state & BL_CORE_FBBLANK)
+ val = 0;
- if (value != 0)
+ if (val != 0)
ctrl = PM8941_WLED_REG_MOD_EN_BIT;
- val = value * PM8941_WLED_REG_VAL_MAX / LED_FULL;
-
rc = regmap_update_bits(wled->regmap,
wled->addr + PM8941_WLED_REG_MOD_EN,
PM8941_WLED_REG_MOD_EN_MASK, ctrl);
@@ -128,16 +127,6 @@ static int pm8941_wled_set(struct led_classdev *cdev,
return rc;
}
-static void pm8941_wled_set_brightness(struct led_classdev *cdev,
- enum led_brightness value)
-{
- if (pm8941_wled_set(cdev, value)) {
- dev_err(cdev->dev, "Unable to set brightness\n");
- return;
- }
- cdev->brightness = value;
-}
-
static int pm8941_wled_setup(struct pm8941_wled *wled)
{
int rc;
@@ -336,12 +325,9 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev)
}
wled->addr = val;
- rc = of_property_read_string(dev->of_node, "label", &wled->cdev.name);
+ rc = of_property_read_string(dev->of_node, "label", &wled->name);
if (rc)
- wled->cdev.name = dev->of_node->name;
-
- wled->cdev.default_trigger = of_get_property(dev->of_node,
- "linux,default-trigger", NULL);
+ wled->name = dev->of_node->name;
*cfg = pm8941_wled_config_defaults;
for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) {
@@ -377,8 +363,14 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev)
return 0;
}
+static const struct backlight_ops pm8941_wled_ops = {
+ .update_status = pm8941_wled_update_status,
+};
+
static int pm8941_wled_probe(struct platform_device *pdev)
{
+ struct backlight_properties props;
+ struct backlight_device *bl;
struct pm8941_wled *wled;
struct regmap *regmap;
int rc;
@@ -403,13 +395,14 @@ static int pm8941_wled_probe(struct platform_device *pdev)
if (rc)
return rc;
- wled->cdev.brightness_set = pm8941_wled_set_brightness;
-
- rc = devm_led_classdev_register(&pdev->dev, &wled->cdev);
- if (rc)
- return rc;
-
- platform_set_drvdata(pdev, wled);
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_RAW;
+ props.max_brightness = PM8941_WLED_REG_VAL_MAX;
+ bl = devm_backlight_device_register(&pdev->dev, wled->name,
+ &pdev->dev, wled,
+ &pm8941_wled_ops, &props);
+ if (IS_ERR(bl))
+ return PTR_ERR(bl);
return 0;
};
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists