| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1437025108.18175.13.camel@mtksdaap41>
Date: Thu, 16 Jul 2015 13:38:28 +0800
From: YH Huang <yh.huang@...iatek.com>
To: Daniel Kurtz <djkurtz@...omium.org>
CC: Matthias Brugger <matthias.bgg@...il.com>,
Mark Rutland <mark.rutland@....com>,
Thierry Reding <thierry.reding@...il.com>,
"Rob Herring" <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>, <linux-pwm@...r.kernel.org>,
"open list:OPEN FIRMWARE AND..." <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
<linux-mediatek@...ts.infradead.org>,
"Sascha Hauer" <kernel@...gutronix.de>,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
<yh.huang@...iatek.com>
Subject: Re: [PATCH v5 2/3] pwm: add MediaTek display PWM driver support
On Wed, 2015-07-15 at 23:59 +0800, YH Huang wrote:
> On Mon, 2015-07-13 at 18:19 +0800, Daniel Kurtz wrote:
> > On Mon, Jul 13, 2015 at 5:04 PM, YH Huang <yh.huang@...iatek.com> wrote:
> > > Add display PWM driver support to modify backlight for MT8173 and MT6595.
> > > The PWM has one channel to control the brightness of the display.
> > > When the (high_width / period) is closer to 1, the screen is brighter;
> > > otherwise, it is darker.
> > >
> > > Signed-off-by: YH Huang <yh.huang@...iatek.com>
> > > ---
> > > drivers/pwm/Kconfig | 10 ++
> > > drivers/pwm/Makefile | 1 +
> > > drivers/pwm/pwm-mtk-disp.c | 256 +++++++++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 267 insertions(+)
> > > create mode 100644 drivers/pwm/pwm-mtk-disp.c
> > >
> > > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> > > index b1541f4..f5b03a4 100644
> > > --- a/drivers/pwm/Kconfig
> > > +++ b/drivers/pwm/Kconfig
> > > @@ -211,6 +211,16 @@ config PWM_LPSS_PLATFORM
> > > To compile this driver as a module, choose M here: the module
> > > will be called pwm-lpss-platform.
> > >
> > > +config PWM_MTK_DISP
> > > + tristate "MediaTek display PWM driver"
> > > + depends on ARCH_MEDIATEK || COMPILE_TEST
> > > + help
> > > + Generic PWM framework driver for MediaTek disp-pwm device.
> > > + The PWM is used to control the backlight brightness for display.
> > > +
> > > + To compile this driver as a module, choose M here: the module
> > > + will be called pwm-mtk-disp.
> > > +
> > > config PWM_MXS
> > > tristate "Freescale MXS PWM support"
> > > depends on ARCH_MXS && OF
> > > diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> > > index ec50eb5..99c9e75 100644
> > > --- a/drivers/pwm/Makefile
> > > +++ b/drivers/pwm/Makefile
> > > @@ -18,6 +18,7 @@ obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
> > > obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
> > > obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
> > > obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
> > > +obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
> > > obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
> > > obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
> > > obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
> > > diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
> > > new file mode 100644
> > > index 0000000..1f17cee
> > > --- /dev/null
> > > +++ b/drivers/pwm/pwm-mtk-disp.c
> > > @@ -0,0 +1,256 @@
> > > +/*
> > > + * MediaTek display pulse-width-modulation controller driver.
> > > + * Copyright (c) 2015 MediaTek Inc.
> > > + * Author: YH Huang <yh.huang@...iatek.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + */
> > > +
> > > +#include <linux/clk.h>
> > > +#include <linux/err.h>
> > > +#include <linux/io.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of.h>
> > > +#include <linux/pwm.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/slab.h>
> > > +
> > > +#define DISP_PWM_EN 0
> >
> > The "DISP_PWM_*" are register offsets, so use a hex value, like this:
> >
> > #define DISP_PWM_EN 0x00
> >
> > Use BIT() for register *fields*, that is, the individual bits of a register.
> >
>
> Got it!
>
> > > +#define PWM_ENABLE_MASK BIT(0)
> > > +
> > > +#define DISP_PWM_COMMIT BIT(3)
> >
> > #define DISP_PWM_COMMIT 0x08
> >
> > > +#define PWM_COMMIT_MASK BIT(0)
> > > +
> > > +#define DISP_PWM_CON_0 BIT(4)
> >
> > #define DISP_PWM_COMMIT 0x10
> >
> > > +#define PWM_CLKDIV_SHIFT 16
> > > +#define PWM_CLKDIV_MAX 0x3ff
> > > +#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
> > > +
> > > +#define DISP_PWM_CON_1 0x14
> > > +#define PWM_PERIOD_MASK 0xfff
> > > +/* Shift log2(PWM_PERIOD_MASK + 1) as divisor */
> > > +#define PWM_PERIOD_BIT_SHIFT 12
> > > +
> > > +#define PWM_HIGH_WIDTH_SHIFT 16
> > > +#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
> > > +
> > > +struct mtk_disp_pwm {
> > > + struct pwm_chip chip;
> > > + struct device *dev;
> >
> > I don't think "dev" is actually used. And, if needed, it can be
> > extracted from "chip".
> >
>
> I will drop it.
>
> > > + struct clk *clk_main;
> > > + struct clk *clk_mm;
> > > + void __iomem *base;
> > > +};
> > > +
> > > +static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
> > > +{
> > > + return container_of(chip, struct mtk_disp_pwm, chip);
> > > +}
> > > +
> > > +static void mtk_disp_pwm_update_bits(void __iomem *address, u32 mask, u32 value)
> >
> > Take "struct mtk_disp_pwm *mdp" as a param and extract mdp->base,
> > rather than pass the raw iomem address.
> >
>
> I will revise it like this.
>
> static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp,
> u32 reg, u32 mask, u32 value)
> {
> void __iomem *address;
> u32 val;
>
> address = mdp->base + reg;
> val = readl(address);
> val &= ~mask;
> val |= value;
> writel(val, address);
> }
>
> > > +{
> > > + u32 val;
> > > +
> > > + val = readl(address);
> > > + val &= ~mask;
> > > + val |= value;
> > > + writel(val, address);
> > > +}
> > > +
> > > +static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> > > + int duty_ns, int period_ns)
> > > +{
> > > + struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
> > > + u64 div, rate;
> > > + u32 clk_div, period, high_width, value;
> > > +
> > > + /*
> > > + * Find period, high_width and clk_div to suit duty_ns and period_ns.
> > > + * Calculate proper div value to keep period value in the bound.
> > > + *
> > > + * period_ns = 10^9 * (clk_div + 1) * (period + 1) / PWM_CLK_RATE
> > > + * duty_ns = 10^9 * (clk_div + 1) * high_width / PWM_CLK_RATE
> > > + *
> > > + * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
> > > + * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
> > > + */
> > > + rate = clk_get_rate(mdp->clk_main);
> > > + clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >>
> > > + PWM_PERIOD_BIT_SHIFT;
> > > + if (clk_div > PWM_CLKDIV_MAX)
> > > + return -EINVAL;
> > > +
> > > + div = NSEC_PER_SEC * (clk_div + 1);
> > > + period = div64_u64(rate * period_ns, div);
> > > + if (period > 0)
> > > + period--;
> > > +
> > > + high_width = div64_u64(rate * duty_ns, div);
> > > +
> > > + mtk_disp_pwm_update_bits(mdp->base + DISP_PWM_CON_0,
> > > + PWM_CLKDIV_MASK, clk_div << PWM_CLKDIV_SHIFT);
> > > +
> > > + value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
> > > + mtk_disp_pwm_update_bits(mdp->base + DISP_PWM_CON_1,
> > > + PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
> > > +
> > > + mtk_disp_pwm_update_bits(mdp->base + DISP_PWM_COMMIT,
> > > + PWM_COMMIT_MASK, 1);
> > > + mtk_disp_pwm_update_bits(mdp->base + DISP_PWM_COMMIT,
> > > + PWM_COMMIT_MASK, 0);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> > > +{
> > > + struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
> > > +
> > > + mtk_disp_pwm_update_bits(mdp->base + DISP_PWM_EN,
> > > + PWM_ENABLE_MASK, 1);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> > > +{
> > > + struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
> > > +
> > > + mtk_disp_pwm_update_bits(mdp->base + DISP_PWM_EN,
> > > + PWM_ENABLE_MASK, 0);
> > > +}
> > > +
> > > +static const struct pwm_ops mtk_disp_pwm_ops = {
> > > + .config = mtk_disp_pwm_config,
> > > + .enable = mtk_disp_pwm_enable,
> > > + .disable = mtk_disp_pwm_disable,
> > > + .owner = THIS_MODULE,
> > > +};
> > > +
> > > +static int mtk_disp_pwm_probe(struct platform_device *pdev)
> > > +{
> > > + struct mtk_disp_pwm *mdp;
> > > + struct resource *r;
> > > + int ret;
> > > +
> > > + mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
> > > + if (!mdp)
> > > + return -ENOMEM;
> > > +
> > > + mdp->dev = &pdev->dev;
> > > +
> > > + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > + mdp->base = devm_ioremap_resource(&pdev->dev, r);
> > > + if (IS_ERR(mdp->base))
> > > + return PTR_ERR(mdp->base);
> > > +
> > > + mdp->clk_main = devm_clk_get(&pdev->dev, "main");
> > > + if (IS_ERR(mdp->clk_main))
> > > + return PTR_ERR(mdp->clk_main);
> > > +
> > > + mdp->clk_mm = devm_clk_get(&pdev->dev, "mm");
> > > + if (IS_ERR(mdp->clk_mm))
> > > + return PTR_ERR(mdp->clk_mm);
> > > +
> > > + ret = clk_prepare_enable(mdp->clk_main);
> >
> > Delay turning on the PWM clock until it is actually needed (pwm_enable)...
> > Just be careful to ensure that the "main" clock is enabled when
> > writing registers during mtk_disp_pwm_config.
Since pwm-backlight driver configures PWM before enable PWM, I enable
clocks at the probe function.
Turning on the PWM clock in pwm_enable will lose the first configuration
of PWM. It won't affect a lot since the system configures PWM many times
at boot time.
So should I delay or keep the original way?
> > By the way, is the pwm in a power domain that must also be enabled
> > when enabling the pwm?
>
> It is in the display power domain which must also be enabled.
>
> >
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + ret = clk_prepare_enable(mdp->clk_mm);
> > > + if (ret < 0)
> > > + goto disable_clk_main;
> > > +
> > > + platform_set_drvdata(pdev, mdp);
> >
> > Set this only after pwmchip_add() succeeds.
>
> OK.
>
> >
> > > +
> > > + mdp->chip.dev = &pdev->dev;
> > > + mdp->chip.ops = &mtk_disp_pwm_ops;
> > > + mdp->chip.base = -1;
> > > + mdp->chip.npwm = 1;
> > > +
> > > + ret = pwmchip_add(&mdp->chip);
> > > + if (ret < 0) {
> > > + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
> > > + goto disable_clk_mm;
> > > + }
> > > +
> > > + return 0;
> > > +
> > > +disable_clk_mm:
> > > + clk_disable_unprepare(mdp->clk_mm);
> > > +disable_clk_main:
> > > + clk_disable_unprepare(mdp->clk_main);
> > > + return ret;
> > > +}
> > > +
> > > +static int mtk_disp_pwm_remove(struct platform_device *pdev)
> > > +{
> > > + struct mtk_disp_pwm *mdp = platform_get_drvdata(pdev);
> > > + int ret = pwmchip_remove(&mdp->chip);
> > > +
> > > + clk_disable_unprepare(mdp->clk_main);
> > > + clk_disable_unprepare(mdp->clk_mm);
> >
> > Nit: it is more traditional to disable clocks in the opposite order to
> > which they are enabled, so:
> >
> > clk_disable_unprepare(mdp->clk_mm);
> > clk_disable_unprepare(mdp->clk_main);
> >
>
> OK.
>
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static const struct of_device_id mtk_disp_pwm_of_match[] = {
> > > + { .compatible = "mediatek,mt8173-disp-pwm" },
> > > + { .compatible = "mediatek,mt6595-disp-pwm" },
> > > + { }
> > > +};
> > > +MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
> > > +
> > > +#ifdef CONFIG_PM_SLEEP
> > > +static int mtk_disp_pwm_suspend(struct device *dev)
> > > +{
> > > + struct mtk_disp_pwm *mdp = dev_get_drvdata(dev);
> > > +
> > > + clk_disable_unprepare(mdp->clk_main);
> > > + clk_disable_unprepare(mdp->clk_mm);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int mtk_disp_pwm_resume(struct device *dev)
> > > +{
> > > + struct mtk_disp_pwm *mdp = dev_get_drvdata(dev);
> > > + int ret;
> > > +
> > > + ret = clk_prepare_enable(mdp->clk_main);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + ret = clk_prepare_enable(mdp->clk_mm);
> > > + if (ret < 0) {
> > > + clk_disable_unprepare(mdp->clk_main);
> > > + return ret;
> > > + }
> > > +
> >
> > Don't you also have to restore the PWM rate and frequency?
> >
> > Is it possible to save power at runtime by leaving mdp->clk_mm enabled
> > (to generate the PWM signal), but disable mdp->clk_main (clock
> > required to access PWM registers)?
>
> The pwm-backlight driver will restore the data.
>
> After I try to disable anyone of the two clocks at runtime, the
> backlight doesn't work well(no immediate update or losing backlight).
> So we need to keep both clock enabled.
>
> Regards,
> YH Huang
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists