linux-kernel - Re: [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 16 Jul 2015 20:26:33 +0800
From:	"majun (F)" <majun258@...wei.com>
To:	Marc Zyngier <marc.zyngier@....com>,
	Thomas Gleixner <tglx@...utronix.de>
CC:	Catalin Marinas <Catalin.Marinas@....com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	Will Deacon <Will.Deacon@....com>,
	Mark Rutland <Mark.Rutland@....com>,
	"jason@...edaemon.net" <jason@...edaemon.net>,
	"lizefan@...wei.com" <lizefan@...wei.com>,
	"huxinwei@...wei.com" <huxinwei@...wei.com>,
	"dingtianhong@...wei.com" <dingtianhong@...wei.com>,
	"zhaojunhua@...ilicon.com" <zhaojunhua@...ilicon.com>,
	"liguozhu@...ilicon.com" <liguozhu@...ilicon.com>,
	"xuwei5@...ilicon.com" <xuwei5@...ilicon.com>,
	"wei.chenwei@...ilicon.com" <wei.chenwei@...ilicon.com>,
	"guohanjun@...wei.com" <guohanjun@...wei.com>,
	"wuyun.wu@...wei.com" <wuyun.wu@...wei.com>,
	"guodong.xu@...aro.org" <guodong.xu@...aro.org>,
	"haojian.zhuang@...aro.org" <haojian.zhuang@...aro.org>,
	"zhangfei.gao@...aro.org" <zhangfei.gao@...aro.org>,
	"usman.ahmad@...aro.org" <usman.ahmad@...aro.org>
Subject: Re: [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen
 interrupt controller



在 2015/7/16 17:30, Marc Zyngier 写道:
> On 16/07/15 10:22, majun (F) wrote:
>>
>>
>> 在 2015/7/16 16:52, Marc Zyngier 写道:
>>> On 16/07/15 09:35, majun (F) wrote:
>>
>>>>> I'm a bit puzzled.
>>>>
>>>> For interrupts connect to mbigen , the interrupt trigger type, device id and
>>>> event id value are encoded in mbigen chip already.
>>>>
>>>> There are two types of mbigen node within a mbigen chip.
>>>> Type1: event id valud can't be programmed.
>>>> Type2: event id value can be programmed.
>>>>
>>>> For example: An device with 5 interrupts connected to Mbigen node
>>>> type 1.The default event id vlaue encoded in mbigen chip for these 5 interrupt
>>>> is from 0 to 4.
>>>>
>>>> Because the event id value can't be programmed, we need to define all of
>>>> 5 interrupts in dts file so that these 5 interrupt has
>>>
>>> You can define what you want in the device tree, the ITS doesn't care!
>>> Nothing in the ITS code parses this property, and there is absolutely
>>> zero chance that the even the ITS has allocated will actually match what
>>> you expect.
>>>
>>> The ITS *relies* on the principle that the evenID can be programmed,
>>> just like any MSI controller relies on the device to be programmed with
>>> whatever payload has been provided. If all of a sudden we have to
>>> support HW that has its own view of the payload, what you have here will
>>> simply not work.
>>>
>> "If all of a sudden we have to
>>  support HW that has its own view of the payload, what you have here will
>>  simply not work."
>>
>> I am not very unstand this case, would you please explain this more detail?
> 
> It is the ITS driver that allocates the eventID, not the device. If your
> hardware has decided that it will use event 5, while the ITS expect it
> to use event 3, nothing will work. And there is no way for the ITS to
> know which event your device is using (it doesn't parse your device's
> device tree).
> 
Yes, I agree with you that eventID should be allocated by ITS driver.
But I want to explain the case you said above can be avoided.

For example, An device with total 5 interrupts connected to Mbigen node.
In mbigen chip, the default eventID value for each device starts from 0.
So, for these 5 interrupts the default eventID value is from 0 to 4.

Because the default eventID is fixed in mbigen chip, to make these 5 interrupt
work, the only way is define all these 5 interrupts in dts file.

When irq initializing, ITS driver will allocat LPI interrupt number for these
5 interrupts, for example : from 8192 to 8196. and the eventID value is from 0 to 4.
Now, the allocated eventID value same as the eventID value encoded in mbigen chip,
The interrupt can work.

I know this is not a good method,but for current mbigen chip,it's the only solution.










--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/