linux-kernel - Re: [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <55A8AE30.6040908@osg.samsung.com>
Date:	Fri, 17 Jul 2015 09:26:40 +0200
From:	Javier Martinez Canillas <javier@....samsung.com>
To:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
Cc:	devicetree@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
	linux-kernel@...r.kernel.org, Mark Brown <broonie@...nel.org>,
	Lee Jones <lee.jones@...aro.org>,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 4/4] mfd: max77686: Split out regulator part from the
 DT binding

Hello Krzysztof,

On 07/17/2015 09:11 AM, Krzysztof Kozlowski wrote:
> 2015-07-17 15:59 GMT+09:00 Javier Martinez Canillas <javier@....samsung.com>:
>> Hello Krzysztof,
>>
>> On 07/17/2015 08:49 AM, Krzysztof Kozlowski wrote:
>>> 2015-07-17 15:46 GMT+09:00 Javier Martinez Canillas <javier@....samsung.com>:
>>>> Hello Krzysztof,
>>>>
>>>> On 07/17/2015 08:42 AM, Krzysztof Kozlowski wrote:
>>>>> 2015-07-17 15:29 GMT+09:00 Javier Martinez Canillas <javier@....samsung.com>:
>>>>>> The Maxim MAX77686 PMIC is a multi-function device with regulators,
>>>>>> clocks and a RTC. The DT bindings for the clocks are in a separate
>>>>>> file but the bindings for the regulators are inside the mfd part.
>>>>>>
>>>>>> To make it consistent with the clocks portion of the binding and
>>>>>> because is more natural to look for regulator bindings under the
>>>>>> bindings/regulator sub-directory, split the regulator portion of
>>>>>> the DT binding and add it as a separate file.
>>>>>>
>>>>>> Signed-off-by: Javier Martinez Canillas <javier@....samsung.com>
>>>>>>
>>>>>> ---
>>>>>>
>>>>>> Changes in v2:
>>>>>> - Use a generic name for the max77686 node in the regulator example.
>>>>>>
>>>>>>  Documentation/devicetree/bindings/mfd/max77686.txt | 58 +-----------------
>>>>>>  .../devicetree/bindings/regulator/max77686.txt     | 71 ++++++++++++++++++++++
>>>>>>  2 files changed, 74 insertions(+), 55 deletions(-)
>>>>>>  create mode 100644 Documentation/devicetree/bindings/regulator/max77686.txt
>>>>>
>>>>> Putting regulator bindings under regulator directory seems logical so
>>>>> I am fine with it.
>>>>>
>>>>> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
>>>>>
>>>>
>>>> Thanks a lot for your review. For completeness, I talked with Lee Jones
>>>> over IRC yesterday asking him his opinion on whether MFD DT binding doc
>>>> should contain all the info or if it should be split across different
>>>> subsystems and he prefers the later. That's why I re-spun this series.
>>>
>>> Okay, this sounds good.
>>>
>>> One more thing - can you update the maintainers file? The bindings
>>> documentation is mentioned there for max77686.
>>>
>>
>> Sure, I see that also the max77802 files are missing in that section.
>> I'll included that as well.
> 
> The max717802 are not there because they are not part of this
> maintainership :) . I wasn't involved in development of them (except
> reviewing) so I did not put myself as their maintainer.
>

Fair enough, I guess I should add an entry for max77802 then and
volunteer myself as maintainer since after all I added the driver.
 
>> But I'll wait to see if Lee pick this
>> series before posting the patch for MAINTAINERS.
> 
> I think the maintainers should be updated in the same patchset (or
> even patch) to keep the state consistent.
>

Ok, I'll post a patch then to be applied on top of this series. I
could re-spin the whole series and add it to $subject but I'm not
sure if is worth it since it's only documentation and I prefer to
avoid spaming Lee and Mark with yet another revision.

> Best regards,
> Krzysztof
>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/