lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <55AAF64D.4040201@vanguardiasur.com.ar>
Date:	Sat, 18 Jul 2015 21:58:53 -0300
From:	Ezequiel Garcia <ezequiel@...guardiasur.com.ar>
To:	Antoine Tenart <antoine.tenart@...e-electrons.com>,
	sebastian.hesselbarth@...il.com, dwmw2@...radead.org,
	computersforpeace@...il.com
Cc:	boris.brezillon@...e-electrons.com, zmxu@...vell.com,
	jszhang@...vell.com, linux-arm-kernel@...ts.infradead.org,
	linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Robert Jarzmik <robert.jarzmik@...e.fr>
Subject: Re: [PATCH v2 3/4] mtd: pxa3xx_nand: rework flash detection and
 timing setup

On 07/07/2015 12:08 PM, Antoine Tenart wrote:
> Rework the pxa3xx_nand driver to allow using functions exported by the
> nand framework to detect the flash and the timings. Then setup the
> timings using the helpers previously added.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@...e-electrons.com>
> ---
>   drivers/mtd/nand/pxa3xx_nand.c | 137 ++++++++++++-----------------------------
>   1 file changed, 38 insertions(+), 99 deletions(-)
>
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 9a95c24ab2ce..513f8f6069f0 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -1320,48 +1320,16 @@ static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
>   	return NAND_STATUS_READY;
>   }
>
> -static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
> -				    const struct pxa3xx_nand_flash *f)
> +static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info)
>   {
> -	struct platform_device *pdev = info->pdev;
> -	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
>   	struct pxa3xx_nand_host *host = info->host[info->cs];
> -	uint32_t ndcr = 0x0; /* enable all interrupts */
> -
> -	if (f->page_size != 2048 && f->page_size != 512) {
> -		dev_err(&pdev->dev, "Current only support 2048 and 512 size\n");
> -		return -EINVAL;
> -	}
> -
> -	if (f->flash_width != 16 && f->flash_width != 8) {
> -		dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");
> -		return -EINVAL;
> -	}
> -
> -	/* calculate flash information */
> -	host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
> -
> -	/* calculate addressing information */
> -	host->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
> -
> -	if (f->num_blocks * f->page_per_block > 65536)
> -		host->row_addr_cycles = 3;
> -	else
> -		host->row_addr_cycles = 2;
> -
> -	ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
> -	ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
> -	ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
> -	ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
> -	ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
> -	ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
> -
> -	ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
> -	ndcr |= NDCR_SPARE_EN; /* enable spare by default */
> +	struct mtd_info *mtd = host->mtd;
> +	struct nand_chip *chip = mtd->priv;
>
> -	info->reg_ndcr = ndcr;
> +	info->reg_ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
> +	info->reg_ndcr |= (chip->page_shift == 6) ? NDCR_PG_PER_BLK : 0;
> +	info->reg_ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0;
>
> -	pxa3xx_nand_set_timing(host, f->timing);
>   	return 0;
>   }
>
> @@ -1456,19 +1424,31 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
>   }
>   #endif
>
> -static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
> +static int pxa3xx_nand_sensing(struct pxa3xx_nand_host *host)
>   {
> +	struct pxa3xx_nand_info *info = host->info_data;
> +	struct platform_device *pdev = info->pdev;
> +	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
>   	struct mtd_info *mtd;
>   	struct nand_chip *chip;
> +	const struct nand_sdr_timings *timings;
>   	int ret;
>
>   	mtd = info->host[info->cs]->mtd;
>   	chip = mtd->priv;
>
> +	/* configure default flash values */
> +	info->reg_ndcr = 0x0; /* enable all interrupts */
> +	info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
> +	info->reg_ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
> +	info->reg_ndcr |= NDCR_SPARE_EN; /* enable spare by default */
> +
>   	/* use the common timing to make a try */
> -	ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
> -	if (ret)
> -		return ret;
> +	timings = onfi_async_timing_mode_to_sdr_timings(0);
> +	if (IS_ERR(timings))
> +		return PTR_ERR(timings);
> +
> +	pxa3xx_nand_set_sdr_timing(host, timings);
>
>   	chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
>   	ret = chip->waitfunc(mtd, chip);
> @@ -1553,12 +1533,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>   	struct pxa3xx_nand_info *info = host->info_data;
>   	struct platform_device *pdev = info->pdev;
>   	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
> -	struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
> -	const struct pxa3xx_nand_flash *f = NULL;
>   	struct nand_chip *chip = mtd->priv;
> -	uint32_t id = -1;
> -	uint64_t chipsize;
> -	int i, ret, num;
> +	int ret;
>   	uint16_t ecc_strength, ecc_step;
>
>   	if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
> @@ -1567,7 +1543,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>   	/* Set a default chunk size */
>   	info->chunk_size = 512;
>
> -	ret = pxa3xx_nand_sensing(info);
> +	ret = pxa3xx_nand_sensing(host);
>   	if (ret) {
>   		dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
>   			 info->cs);
> @@ -1575,64 +1551,26 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>   		return ret;
>   	}
>
> -	chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
> -	id = *((uint16_t *)(info->data_buff));
> -	if (id != 0)
> -		dev_info(&info->pdev->dev, "Detect a flash id %x\n", id);
> -	else {
> -		dev_warn(&info->pdev->dev,
> -			 "Read out ID 0, potential timing set wrong!!\n");
> -
> -		return -EINVAL;
> -	}
> -
> -	num = ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1;
> -	for (i = 0; i < num; i++) {
> -		if (i < pdata->num_flash)
> -			f = pdata->flash + i;
> -		else
> -			f = &builtin_flash_types[i - pdata->num_flash + 1];
> -
> -		/* find the chip in default list */
> -		if (f->chip_id == id)
> -			break;
> -	}
> -
> -	if (i >= (ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1)) {
> -		dev_err(&info->pdev->dev, "ERROR!! flash not defined!!!\n");
> -
> -		return -EINVAL;
> -	}
> -
> -	ret = pxa3xx_nand_config_flash(info, f);
> -	if (ret) {
> -		dev_err(&info->pdev->dev, "ERROR! Configure failed\n");
> -		return ret;
> -	}
> -
> -	memset(pxa3xx_flash_ids, 0, sizeof(pxa3xx_flash_ids));
> -
> -	pxa3xx_flash_ids[0].name = f->name;
> -	pxa3xx_flash_ids[0].dev_id = (f->chip_id >> 8) & 0xffff;
> -	pxa3xx_flash_ids[0].pagesize = f->page_size;
> -	chipsize = (uint64_t)f->num_blocks * f->page_per_block * f->page_size;
> -	pxa3xx_flash_ids[0].chipsize = chipsize >> 20;
> -	pxa3xx_flash_ids[0].erasesize = f->page_size * f->page_per_block;
> -	if (f->flash_width == 16)
> -		pxa3xx_flash_ids[0].options = NAND_BUSWIDTH_16;
> -	pxa3xx_flash_ids[1].name = NULL;
> -	def = pxa3xx_flash_ids;
>   KEEP_CONFIG:

Hm...

> -	if (info->reg_ndcr & NDCR_DWIDTH_M)
> -		chip->options |= NAND_BUSWIDTH_16;
> -

...can't see why this removal is needed. AFAICS, it removes
support for 16-bit devices (only supported when using keep-config).

>   	/* Device detection must be done with ECC disabled */
>   	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
>   		nand_writel(info, NDECCCTRL, 0x0);
>
> -	if (nand_scan_ident(mtd, 1, def))
> +	if (nand_scan_ident(mtd, 1, NULL))
>   		return -ENODEV;
>
> +	if (!pdata->keep_config) {
> +		ret = pxa3xx_nand_init_timings(host);
> +		if (ret) {
> +			dev_err(&info->pdev->dev, "Failed to set timings: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
> +	ret = pxa3xx_nand_config_flash(info);
> +	if (ret)
> +		return ret;
> +
>   	if (pdata->flash_bbt) {
>   		/*
>   		 * We'll use a bad block table stored in-flash and don't
> @@ -1729,6 +1667,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
>   		host->mtd = mtd;
>   		host->cs = cs;
>   		host->info_data = info;
> +		host->read_id_bytes = 4;
>   		mtd->priv = host;
>   		mtd->owner = THIS_MODULE;
>
>


-- 
Ezequiel Garcia, VanguardiaSur
www.vanguardiasur.com.ar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ