| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1437380237-28961-3-git-send-email-yh.huang@mediatek.com>
Date: Mon, 20 Jul 2015 16:17:16 +0800
From: YH Huang <yh.huang@...iatek.com>
To: Matthias Brugger <matthias.bgg@...il.com>,
Mark Rutland <mark.rutland@....com>,
Thierry Reding <thierry.reding@...il.com>
CC: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
<linux-pwm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<srv_heupstream@...iatek.com>,
<linux-mediatek@...ts.infradead.org>,
Sascha Hauer <kernel@...gutronix.de>,
<yingjoe.chen@...iatek.com>, YH Huang <yh.huang@...iatek.com>
Subject: [PATCH v6 2/3] pwm: add MediaTek display PWM driver support
Add display PWM driver support to modify backlight for MT8173 and MT6595.
The PWM has one channel to control the brightness of the display.
When the (high_width / period) is closer to 1, the screen is brighter;
otherwise, it is darker.
Signed-off-by: YH Huang <yh.huang@...iatek.com>
---
drivers/pwm/Kconfig | 10 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-mtk-disp.c | 232 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 243 insertions(+)
create mode 100644 drivers/pwm/pwm-mtk-disp.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index b1541f4..f5b03a4 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -211,6 +211,16 @@ config PWM_LPSS_PLATFORM
To compile this driver as a module, choose M here: the module
will be called pwm-lpss-platform.
+config PWM_MTK_DISP
+ tristate "MediaTek display PWM driver"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ help
+ Generic PWM framework driver for MediaTek disp-pwm device.
+ The PWM is used to control the backlight brightness for display.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-mtk-disp.
+
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index ec50eb5..99c9e75 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
+obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
new file mode 100644
index 0000000..69682a0
--- /dev/null
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -0,0 +1,232 @@
+/*
+ * MediaTek display pulse-width-modulation controller driver.
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: YH Huang <yh.huang@...iatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pwm.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define DISP_PWM_EN 0x00
+#define PWM_ENABLE_MASK BIT(0)
+
+#define DISP_PWM_COMMIT 0x08
+#define PWM_COMMIT_MASK BIT(0)
+
+#define DISP_PWM_CON_0 0x10
+#define PWM_CLKDIV_SHIFT 16
+#define PWM_CLKDIV_MAX 0x3ff
+#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
+
+#define DISP_PWM_CON_1 0x14
+#define PWM_PERIOD_MASK 0xfff
+/* Shift log2(PWM_PERIOD_MASK + 1) as divisor */
+#define PWM_PERIOD_BIT_SHIFT 12
+
+#define PWM_HIGH_WIDTH_SHIFT 16
+#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
+
+struct mtk_disp_pwm {
+ struct pwm_chip chip;
+ struct clk *clk_main;
+ struct clk *clk_mm;
+ void __iomem *base;
+};
+
+static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct mtk_disp_pwm, chip);
+}
+
+static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset,
+ u32 mask, u32 value)
+{
+ void __iomem *address;
+ u32 val;
+
+ address = mdp->base + offset;
+ val = readl(address);
+ val &= ~mask;
+ val |= value;
+ writel(val, address);
+}
+
+static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+ u64 div, rate;
+ u32 clk_div, period, high_width, value;
+
+ /*
+ * Find period, high_width and clk_div to suit duty_ns and period_ns.
+ * Calculate proper div value to keep period value in the bound.
+ *
+ * period_ns = 10^9 * (clk_div + 1) * (period + 1) / PWM_CLK_RATE
+ * duty_ns = 10^9 * (clk_div + 1) * high_width / PWM_CLK_RATE
+ *
+ * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
+ * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
+ */
+ rate = clk_get_rate(mdp->clk_main);
+ clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >>
+ PWM_PERIOD_BIT_SHIFT;
+ if (clk_div > PWM_CLKDIV_MAX)
+ return -EINVAL;
+
+ div = NSEC_PER_SEC * (clk_div + 1);
+ period = div64_u64(rate * period_ns, div);
+ if (period > 0)
+ period--;
+
+ high_width = div64_u64(rate * duty_ns, div);
+ value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
+
+ clk_enable(mdp->clk_main);
+ clk_enable(mdp->clk_mm);
+
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0,
+ PWM_CLKDIV_MASK, clk_div << PWM_CLKDIV_SHIFT);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
+ PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0);
+
+ clk_disable(mdp->clk_mm);
+ clk_disable(mdp->clk_main);
+
+ return 0;
+}
+
+static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+
+ clk_enable(mdp->clk_main);
+ clk_enable(mdp->clk_mm);
+
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ PWM_ENABLE_MASK, 1);
+
+ return 0;
+}
+
+static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ PWM_ENABLE_MASK, 0);
+
+ clk_disable(mdp->clk_mm);
+ clk_disable(mdp->clk_main);
+}
+
+static const struct pwm_ops mtk_disp_pwm_ops = {
+ .config = mtk_disp_pwm_config,
+ .enable = mtk_disp_pwm_enable,
+ .disable = mtk_disp_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int mtk_disp_pwm_probe(struct platform_device *pdev)
+{
+ struct mtk_disp_pwm *mdp;
+ struct resource *r;
+ int ret;
+
+ mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
+ if (!mdp)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mdp->base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(mdp->base))
+ return PTR_ERR(mdp->base);
+
+ mdp->clk_main = devm_clk_get(&pdev->dev, "main");
+ if (IS_ERR(mdp->clk_main))
+ return PTR_ERR(mdp->clk_main);
+
+ mdp->clk_mm = devm_clk_get(&pdev->dev, "mm");
+ if (IS_ERR(mdp->clk_mm))
+ return PTR_ERR(mdp->clk_mm);
+
+ ret = clk_prepare(mdp->clk_main);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_prepare(mdp->clk_mm);
+ if (ret < 0)
+ goto disable_clk_main;
+
+ mdp->chip.dev = &pdev->dev;
+ mdp->chip.ops = &mtk_disp_pwm_ops;
+ mdp->chip.base = -1;
+ mdp->chip.npwm = 1;
+
+ ret = pwmchip_add(&mdp->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ goto disable_clk_mm;
+ }
+
+ platform_set_drvdata(pdev, mdp);
+
+ return 0;
+
+disable_clk_mm:
+ clk_unprepare(mdp->clk_mm);
+disable_clk_main:
+ clk_unprepare(mdp->clk_main);
+ return ret;
+}
+
+static int mtk_disp_pwm_remove(struct platform_device *pdev)
+{
+ struct mtk_disp_pwm *mdp = platform_get_drvdata(pdev);
+ int ret = pwmchip_remove(&mdp->chip);
+
+ clk_unprepare(mdp->clk_mm);
+ clk_unprepare(mdp->clk_main);
+
+ return ret;
+}
+
+static const struct of_device_id mtk_disp_pwm_of_match[] = {
+ { .compatible = "mediatek,mt8173-disp-pwm" },
+ { .compatible = "mediatek,mt6595-disp-pwm" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
+
+static struct platform_driver mtk_disp_pwm_driver = {
+ .driver = {
+ .name = "mediatek-disp-pwm",
+ .of_match_table = mtk_disp_pwm_of_match,
+ },
+ .probe = mtk_disp_pwm_probe,
+ .remove = mtk_disp_pwm_remove,
+};
+module_platform_driver(mtk_disp_pwm_driver);
+
+MODULE_AUTHOR("YH Huang <yh.huang@...iatek.com>");
+MODULE_DESCRIPTION("MediaTek SoC display PWM driver");
+MODULE_LICENSE("GPL v2");
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists