| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5bfa3e1947b9d04de86d9bbc59acd98dbb8b9e07.1437399438.git.stwiss.opensource@diasemi.com>
Date: Mon, 20 Jul 2015 14:37:18 +0100
From: S Twiss <stwiss.opensource@...semi.com>
To: DEVICETREE <devicetree@...r.kernel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
LINUXINPUT <linux-input@...r.kernel.org>,
LINUXKERNEL <linux-kernel@...r.kernel.org>,
RTCLINUX <rtc-linux@...glegroups.com>,
S Twiss <stwiss.opensource@...semi.com>
CC: David Dajun Chen <david.chen@...semi.com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Lee Jones <lee.jones@...aro.org>,
Mark Rutland <mark.rutland@....com>,
Pawel Moll <pawel.moll@....com>,
Rob Herring <robh+dt@...nel.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Support Opensource <support.opensource@...semi.com>
Subject: [PATCH V2 2/3] onkey: da9063: Add DA9062 OnKey capability to DA9063
OnKey driver
From: S Twiss <stwiss.opensource@...semi.com>
Add DA9062 OnKey support into the existing DA9063 OnKey driver component by
using generic access tables for common register and bit mask definitions.
The following change will add generic register and bit mask support to the
DA9063 OnKey.
The following alterations have been made to the DA9063 OnKey:
- Addition of a da906x_chip_config structure to hold all
generic registers and bitmasks for this type of OnKey component.
- Addition of an struct of_device_id table for DA9063 and DA9062
defaults
- Refactoring functions to use struct da9063_onkey accesses to generic
registers/masks instead of using defines from registers.h
- Re-work of da9063_onkey_probe() to use of_match_node() and
dev_get_regmap() to provide initialisation of generic registers and
masks and access to regmap
Signed-off-by: Steve Twiss <stwiss.opensource@...semi.com>
---
Checks performed with linux-next/next-20150708/scripts/checkpatch.pl
Kconfig total: 0 errors, 14 warnings, 810 lines checked
da9063_onkey.c total: 0 errors, 2 warnings, 305 lines checked
Changes in V2:
- Altered Kconfig to use the line "Dialog DA9062/63 OnKey"
- Rename of da9063_compatible_onkey_regmap to da906x_chip_config
- char *name changed to const char *name
- Rename struct da9063_compatible_onkey {} back to struct da9063_onkey
This patch applies against linux-next and next-20150708
drivers/input/misc/Kconfig | 8 +--
drivers/input/misc/da9063_onkey.c | 129 ++++++++++++++++++++++++++++++--------
2 files changed, 108 insertions(+), 29 deletions(-)
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index d4f0a81..2610cfa 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -611,11 +611,11 @@ config INPUT_DA9055_ONKEY
will be called da9055_onkey.
config INPUT_DA9063_ONKEY
- tristate "Dialog DA9063 OnKey"
- depends on MFD_DA9063
+ tristate "Dialog DA9062/63 OnKey"
+ depends on MFD_DA9063 || MFD_DA9062
help
- Support the ONKEY of Dialog DA9063 Power Management IC as an
- input device reporting power button statue.
+ Support the ONKEY of Dialog DA9063 and DA9062 Power Management ICs
+ as an input device capable for reporting the power button status.
To compile this driver as a module, choose M here: the module
will be called da9063_onkey.
diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c
index f577585..8eb697d 100644
--- a/drivers/input/misc/da9063_onkey.c
+++ b/drivers/input/misc/da9063_onkey.c
@@ -1,5 +1,5 @@
/*
- * OnKey device driver for DA9063
+ * OnKey device driver for DA9063 and DA9062 PMICs
* Copyright (C) 2015 Dialog Semiconductor Ltd.
*
* This program is free software; you can redistribute it and/or
@@ -24,36 +24,96 @@
#include <linux/mfd/da9063/core.h>
#include <linux/mfd/da9063/pdata.h>
#include <linux/mfd/da9063/registers.h>
+#include <linux/mfd/da9062/core.h>
+#include <linux/mfd/da9062/registers.h>
+
+struct da906x_chip_config {
+ /* REGS */
+ int onkey_status;
+ int onkey_pwr_signalling;
+ int onkey_fault_log;
+ int onkey_shutdown;
+ /* MASKS */
+ int onkey_nonkey_mask;
+ int onkey_nonkey_lock_mask;
+ int onkey_key_reset_mask;
+ int onkey_shutdown_mask;
+ /* NAMES */
+ const char *name;
+};
struct da9063_onkey {
- struct da9063 *hw;
struct delayed_work work;
struct input_dev *input;
struct device *dev;
+ struct regmap *regmap;
+ const struct da906x_chip_config *config;
+ char phys[32];
bool key_power;
};
+static const struct da906x_chip_config da9063_regs = {
+ /* REGS */
+ .onkey_status = DA9063_REG_STATUS_A,
+ .onkey_pwr_signalling = DA9063_REG_CONTROL_B,
+ .onkey_fault_log = DA9063_REG_FAULT_LOG,
+ .onkey_shutdown = DA9063_REG_CONTROL_F,
+ /* MASKS */
+ .onkey_nonkey_mask = DA9063_NONKEY,
+ .onkey_nonkey_lock_mask = DA9063_NONKEY_LOCK,
+ .onkey_key_reset_mask = DA9063_KEY_RESET,
+ .onkey_shutdown_mask = DA9063_SHUTDOWN,
+ /* NAMES */
+ .name = DA9063_DRVNAME_ONKEY,
+};
+
+static const struct da906x_chip_config da9062_regs = {
+ /* REGS */
+ .onkey_status = DA9062AA_STATUS_A,
+ .onkey_pwr_signalling = DA9062AA_CONTROL_B,
+ .onkey_fault_log = DA9062AA_FAULT_LOG,
+ .onkey_shutdown = DA9062AA_CONTROL_F,
+ /* MASKS */
+ .onkey_nonkey_mask = DA9062AA_NONKEY_MASK,
+ .onkey_nonkey_lock_mask = DA9062AA_NONKEY_LOCK_MASK,
+ .onkey_key_reset_mask = DA9062AA_KEY_RESET_MASK,
+ .onkey_shutdown_mask = DA9062AA_SHUTDOWN_MASK,
+ /* NAMES */
+ .name = "da9062-onkey",
+};
+
+static const struct of_device_id da9063_compatible_reg_id_table[] = {
+ { .compatible = "dlg,da9063-onkey", .data = &da9063_regs },
+ { .compatible = "dlg,da9062-onkey", .data = &da9062_regs },
+ { },
+};
+
static void da9063_poll_on(struct work_struct *work)
{
- struct da9063_onkey *onkey = container_of(work, struct da9063_onkey,
- work.work);
+ struct da9063_onkey *onkey = container_of(work,
+ struct da9063_onkey,
+ work.work);
+ const struct da906x_chip_config *config = onkey->config;
unsigned int val;
int fault_log = 0;
bool poll = true;
int error;
/* Poll to see when the pin is released */
- error = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
+ error = regmap_read(onkey->regmap,
+ config->onkey_status,
+ &val);
if (error) {
dev_err(onkey->dev,
"Failed to read ON status: %d\n", error);
goto err_poll;
}
- if (!(val & DA9063_NONKEY)) {
- error = regmap_update_bits(onkey->hw->regmap,
- DA9063_REG_CONTROL_B,
- DA9063_NONKEY_LOCK, 0);
+ if (!(val & config->onkey_nonkey_mask)) {
+ error = regmap_update_bits(onkey->regmap,
+ config->onkey_pwr_signalling,
+ config->onkey_nonkey_lock_mask,
+ 0);
if (error) {
dev_err(onkey->dev,
"Failed to reset the Key Delay %d\n", error);
@@ -70,15 +130,16 @@ static void da9063_poll_on(struct work_struct *work)
* If the fault log KEY_RESET is detected, then clear it
* and shut down the system.
*/
- error = regmap_read(onkey->hw->regmap,
- DA9063_REG_FAULT_LOG, &fault_log);
+ error = regmap_read(onkey->regmap,
+ config->onkey_fault_log,
+ &fault_log);
if (error) {
dev_warn(&onkey->input->dev,
"Cannot read FAULT_LOG: %d\n", error);
- } else if (fault_log & DA9063_KEY_RESET) {
- error = regmap_write(onkey->hw->regmap,
- DA9063_REG_FAULT_LOG,
- DA9063_KEY_RESET);
+ } else if (fault_log & config->onkey_key_reset_mask) {
+ error = regmap_write(onkey->regmap,
+ config->onkey_fault_log,
+ config->onkey_key_reset_mask);
if (error) {
dev_warn(&onkey->input->dev,
"Cannot reset KEY_RESET fault log: %d\n",
@@ -88,10 +149,10 @@ static void da9063_poll_on(struct work_struct *work)
* and then send shutdown command
*/
dev_dbg(&onkey->input->dev,
- "Sending SHUTDOWN to DA9063 ...\n");
- error = regmap_write(onkey->hw->regmap,
- DA9063_REG_CONTROL_F,
- DA9063_SHUTDOWN);
+ "Sending SHUTDOWN to DA9063 ...\n");
+ error = regmap_write(onkey->regmap,
+ config->onkey_shutdown,
+ config->onkey_shutdown_mask);
if (error)
dev_err(&onkey->input->dev,
"Cannot SHUTDOWN DA9063: %d\n",
@@ -107,11 +168,14 @@ err_poll:
static irqreturn_t da9063_onkey_irq_handler(int irq, void *data)
{
struct da9063_onkey *onkey = data;
+ const struct da906x_chip_config *config = onkey->config;
unsigned int val;
int error;
- error = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
- if (onkey->key_power && !error && (val & DA9063_NONKEY)) {
+ error = regmap_read(onkey->regmap,
+ config->onkey_status,
+ &val);
+ if (onkey->key_power && !error && (val & config->onkey_nonkey_mask)) {
input_report_key(onkey->input, KEY_POWER, 1);
input_sync(onkey->input);
schedule_delayed_work(&onkey->work, 0);
@@ -139,9 +203,15 @@ static int da9063_onkey_probe(struct platform_device *pdev)
struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
struct da9063_pdata *pdata = dev_get_platdata(da9063->dev);
struct da9063_onkey *onkey;
+ const struct of_device_id *match;
int irq;
int error;
+ match = of_match_node(da9063_compatible_reg_id_table,
+ pdev->dev.of_node);
+ if (!match)
+ return -ENXIO;
+
onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey),
GFP_KERNEL);
if (!onkey) {
@@ -149,8 +219,14 @@ static int da9063_onkey_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ onkey->config = match->data;
onkey->dev = &pdev->dev;
- onkey->hw = da9063;
+
+ onkey->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!onkey->regmap) {
+ dev_err(&pdev->dev, "Parent regmap unavailable.\n");
+ return -ENXIO;
+ }
if (pdata)
onkey->key_power = pdata->key_power;
@@ -165,8 +241,10 @@ static int da9063_onkey_probe(struct platform_device *pdev)
return -ENOMEM;
}
- onkey->input->name = DA9063_DRVNAME_ONKEY;
- onkey->input->phys = DA9063_DRVNAME_ONKEY "/input0";
+ onkey->input->name = onkey->config->name;
+ snprintf(onkey->phys, sizeof(onkey->phys), "%s/input0",
+ onkey->config->name);
+ onkey->input->phys = onkey->phys;
onkey->input->dev.parent = &pdev->dev;
if (onkey->key_power)
@@ -216,11 +294,12 @@ static struct platform_driver da9063_onkey_driver = {
.probe = da9063_onkey_probe,
.driver = {
.name = DA9063_DRVNAME_ONKEY,
+ .of_match_table = da9063_compatible_reg_id_table,
},
};
module_platform_driver(da9063_onkey_driver);
MODULE_AUTHOR("S Twiss <stwiss.opensource@...semi.com>");
-MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063");
+MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063 and DA9062");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DA9063_DRVNAME_ONKEY);
--
end-of-patch for PATCH V2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists