Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.2.0-rc2-00314-gd80167b85024 (kozik@kozik-lap) (gcc version 4.7.4 (Ubuntu/Linaro 4.7.4-2ubuntu1) ) #766 SMP PREEMPT Tue Jul 21 22:12:16 KST 2015 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Hardkernel Odroid XU3 Lite [ 0.000000] cma: Reserved 64 MiB at 0xba800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Running under secure firmware. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ee77f000 s15040 r8192 d21824 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513040 [ 0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=/dev/mmcblk0p1 rootwait rw smsc95xx.macaddr=00:1e:06:61:7a:93 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1957712K/2058240K available (6176K kernel code, 314K rwdata, 2232K rodata, 412K init, 8223K bss, 34992K reserved, 65536K cma-reserved, 1230848K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc083e2e8 (8409 kB) [ 0.000000] .init : 0xc083f000 - 0xc08a6000 ( 412 kB) [ 0.000000] .data : 0xc08a6000 - 0xc08f4b68 ( 315 kB) [ 0.000000] .bss : 0xc08f7000 - 0xc10fef60 (8224 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] GIC physical location is 0x10481000 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000008] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000986] Console: colour dummy device 80x30 [ 0.003960] console [tty1] enabled [ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004063] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.004102] ... MAX_LOCK_DEPTH: 48 [ 0.004140] ... MAX_LOCKDEP_KEYS: 8191 [ 0.004179] ... CLASSHASH_SIZE: 4096 [ 0.004218] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.004258] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.004297] ... CHAINHASH_SIZE: 32768 [ 0.004336] memory used by lock dependency info: 5167 kB [ 0.004379] per task-struct memory footprint: 1536 bytes [ 0.004471] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 0.004557] pid_max: default: 32768 minimum: 301 [ 0.005348] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005410] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.008857] CPU: Testing write buffer coherency: ok [ 0.010644] CPU0: update cpu_capacity 448 [ 0.010702] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.011086] Setting up static identity map for 0x40008280 - 0x400082d8 [ 0.011859] ARM CCI driver probed [ 0.012195] Exynos MCPM support installed [ 0.031541] CPU1: update cpu_capacity 1535 [ 0.031549] CPU1: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.036171] CPU2: update cpu_capacity 1535 [ 0.036178] CPU2: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.041090] CPU3: update cpu_capacity 1535 [ 0.041098] CPU3: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.046107] CPU4: update cpu_capacity 1535 [ 0.046115] CPU4: thread -1, cpu 3, socket 0, mpidr 80000003 [ 1.050140] CPU5: failed to come online [ 1.056187] CPU6: update cpu_capacity 448 [ 1.056197] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102 [ 2.060024] CPU7: failed to come online [ 2.060216] Brought up 6 CPUs [ 2.060261] SMP: Total of 6 processors activated (288.00 BogoMIPS). [ 2.060315] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13) [ 2.060390] CPU: This may indicate a broken bootloader or firmware. [ 2.063966] devtmpfs: initialized [ 2.132864] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3 [ 2.136468] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 2.140694] pinctrl core: initialized pinctrl subsystem [ 2.147406] NET: Registered protocol family 16 [ 2.151905] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2.200134] cpuidle: using governor ladder [ 2.245028] cpuidle: using governor menu [ 2.290164] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2.312198] EXYNOS5420 PMU initialized [ 2.418870] SCSI subsystem initialized [ 2.420133] usbcore: registered new interface driver usbfs [ 2.420436] usbcore: registered new interface driver hub [ 2.421041] usbcore: registered new device driver usb [ 2.423235] s3c-i2c 12c80000.i2c: slave address 0x00 [ 2.423305] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 2.425486] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 2.428573] Advanced Linux Sound Architecture Driver Initialized. [ 2.434156] cfg80211: Calling CRDA to update world regulatory domain [ 2.435854] clocksource: Switched to clocksource mct-frc [ 2.493234] NET: Registered protocol family 2 [ 2.495452] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2.495642] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 2.498631] TCP: Hash tables configured (established 8192 bind 8192) [ 2.498799] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 2.499209] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 2.500468] NET: Registered protocol family 1 [ 2.501791] RPC: Registered named UNIX socket transport module. [ 2.501827] RPC: Registered udp transport module. [ 2.501856] RPC: Registered tcp transport module. [ 2.501884] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.511572] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 2.569584] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 2.572635] bounce: pool size: 64 pages [ 2.572779] io scheduler noop registered [ 2.572837] io scheduler deadline registered [ 2.572990] io scheduler cfq registered (default) [ 2.582301] 12100000.phy supply vbus not found, using dummy regulator [ 2.582923] 12100000.phy supply vbus-boost not found, using dummy regulator [ 2.584497] 12500000.phy supply vbus not found, using dummy regulator [ 2.584769] 12500000.phy supply vbus-boost not found, using dummy regulator [ 2.600547] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 2.600623] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 2.618206] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 2.618282] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2.634973] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 2.635047] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2.639911] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 2.639982] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 2.952059] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.959908] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 2.962388] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 2.964282] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10 [ 3.719809] console [ttySAC2] enabled [ 3.724629] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 [ 3.736215] [drm] Initialized drm 1.1.0 20060810 [ 3.746042] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517 [ 3.751239] [drm:hdmi_probe] *ERROR* failed to get regulators [ 3.756951] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed [ 3.801430] brd: module loaded [ 3.826677] loop: module loaded [ 3.831052] usbcore: registered new interface driver asix [ 3.835164] usbcore: registered new interface driver ax88179_178a [ 3.841318] usbcore: registered new interface driver cdc_ether [ 3.847171] usbcore: registered new interface driver smsc75xx [ 3.852881] usbcore: registered new interface driver smsc95xx [ 3.858550] usbcore: registered new interface driver net1080 [ 3.864180] usbcore: registered new interface driver cdc_subset [ 3.870060] usbcore: registered new interface driver zaurus [ 3.875714] usbcore: registered new interface driver cdc_ncm [ 3.883193] usb@12000000 supply vdd33 not found, using dummy regulator [ 3.888538] usb@12000000 supply vdd10 not found, using dummy regulator [ 4.099182] usb@12400000 supply vdd33 not found, using dummy regulator [ 4.104563] usb@12400000 supply vdd10 not found, using dummy regulator [ 4.318480] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.322987] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 4.331019] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 4.338967] xhci-hcd xhci-hcd.2.auto: irq 133, io mem 0x12000000 [ 4.345823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.351578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.358774] usb usb1: Product: xHCI Host Controller [ 4.363612] usb usb1: Manufacturer: Linux 4.2.0-rc2-00314-gd80167b85024 xhci-hcd [ 4.370992] usb usb1: SerialNumber: xhci-hcd.2.auto [ 4.379685] hub 1-0:1.0: USB hub found [ 4.382297] hub 1-0:1.0: 1 port detected [ 4.388940] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.393091] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 4.401427] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.407424] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.414634] usb usb2: Product: xHCI Host Controller [ 4.419465] usb usb2: Manufacturer: Linux 4.2.0-rc2-00314-gd80167b85024 xhci-hcd [ 4.426844] usb usb2: SerialNumber: xhci-hcd.2.auto [ 4.434244] hub 2-0:1.0: USB hub found [ 4.436690] hub 2-0:1.0: 1 port detected [ 4.442455] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 4.446649] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3 [ 4.454920] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 4.462992] xhci-hcd xhci-hcd.5.auto: irq 134, io mem 0x12400000 [ 4.469319] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.475585] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.482787] usb usb3: Product: xHCI Host Controller [ 4.488828] usb usb3: Manufacturer: Linux 4.2.0-rc2-00314-gd80167b85024 xhci-hcd [ 4.494967] usb usb3: SerialNumber: xhci-hcd.5.auto [ 4.502335] hub 3-0:1.0: USB hub found [ 4.504710] hub 3-0:1.0: 1 port detected [ 4.510195] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 4.514305] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4 [ 4.522534] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.528641] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.535840] usb usb4: Product: xHCI Host Controller [ 4.540648] usb usb4: Manufacturer: Linux 4.2.0-rc2-00314-gd80167b85024 xhci-hcd [ 4.548525] usb usb4: SerialNumber: xhci-hcd.5.auto [ 4.555261] hub 4-0:1.0: USB hub found [ 4.557659] hub 4-0:1.0: 1 port detected [ 4.563285] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.568430] ehci-exynos: EHCI EXYNOS driver [ 4.573391] exynos-ehci 12110000.usb: EHCI Host Controller [ 4.578075] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 5 [ 4.586154] exynos-ehci 12110000.usb: irq 115, io mem 0x12110000 [ 4.600911] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 4.606729] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.612247] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.619439] usb usb5: Product: EHCI Host Controller [ 4.624282] usb usb5: Manufacturer: Linux 4.2.0-rc2-00314-gd80167b85024 ehci_hcd [ 4.631658] usb usb5: SerialNumber: 12110000.usb [ 4.638575] hub 5-0:1.0: USB hub found [ 4.640991] hub 5-0:1.0: 3 ports detected [ 4.647897] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.652699] ohci-exynos: OHCI EXYNOS driver [ 4.657370] exynos-ohci 12120000.usb: USB Host Controller [ 4.662627] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 6 [ 4.670120] exynos-ohci 12120000.usb: irq 115, io mem 0x12120000 [ 4.735443] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.740813] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.748570] usb usb6: Product: USB Host Controller [ 4.752762] usb usb6: Manufacturer: Linux 4.2.0-rc2-00314-gd80167b85024 ohci_hcd [ 4.760133] usb usb6: SerialNumber: 12120000.usb [ 4.767058] hub 6-0:1.0: USB hub found [ 4.769428] hub 6-0:1.0: 3 ports detected [ 4.776426] usbcore: registered new interface driver usb-storage [ 4.783077] mousedev: PS/2 mouse device common for all mice [ 4.790134] s3c-rtc 101e0000.rtc: failed to find rtc source clock [ 4.795705] i2c /dev entries driver [ 4.831113] vdd_ldo9: ramp_delay not set [ 4.847044] vdd_ldo13: ramp_delay not set [ 4.856549] vdd_ldo15: ramp_delay not set [ 4.870938] vdd_sd: ramp_delay not set [ 4.946567] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0 [ 4.955885] usb 5-1: new high-speed USB device number 2 using exynos-ehci [ 4.966030] thermal thermal_zone0: failed to read out thermal zone (-22) [ 4.971375] 10060000.tmu supply vtmu not found, using dummy regulator [ 4.978490] thermal thermal_zone1: failed to read out thermal zone (-22) [ 4.984448] 10064000.tmu supply vtmu not found, using dummy regulator [ 4.991512] thermal thermal_zone2: failed to read out thermal zone (-22) [ 4.997527] 10068000.tmu supply vtmu not found, using dummy regulator [ 5.004654] thermal thermal_zone3: failed to read out thermal zone (-22) [ 5.010609] 1006c000.tmu supply vtmu not found, using dummy regulator [ 5.018204] thermal thermal_zone4: failed to read out thermal zone (-22) [ 5.023698] 100a0000.tmu supply vtmu not found, using dummy regulator [ 5.034329] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 5.043796] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com [ 5.051898] sdhci: Secure Digital Host Controller Interface driver [ 5.056863] sdhci: Copyright(c) Pierre Ossman [ 5.061733] Synopsys Designware Multimedia Card Interface Driver [ 5.068617] dwmmc_exynos 12200000.mmc: num-slots property not found, assuming 1 slot is available [ 5.076385] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 5.083058] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 5.089315] dwmmc_exynos 12200000.mmc: Version ID is 250a [ 5.094798] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 90, 64 bit host data width, 64 deep fifo [ 5.104616] dwmmc_exynos 12200000.mmc: No vmmc regulator found [ 5.109973] usb 5-1: New USB device found, idVendor=0424, idProduct=9514 [ 5.116615] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.116675] dwmmc_exynos 12200000.mmc: No vqmmc regulator found [ 5.116900] dwmmc_exynos 12200000.mmc: Got CD GPIO [ 5.117588] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq [ 5.143306] hub 5-1:1.0: USB hub found [ 5.145853] hub 5-1:1.0: 5 ports detected [ 5.146970] dwmmc_exynos 12200000.mmc: 1 slots initialized [ 5.148244] dwmmc_exynos 12220000.mmc: num-slots property not found, assuming 1 slot is available [ 5.148479] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 5.148630] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 5.148647] dwmmc_exynos 12220000.mmc: Version ID is 250a [ 5.148847] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 91, 64 bit host data width, 64 deep fifo [ 5.148945] dwmmc_exynos 12220000.mmc: No vmmc regulator found [ 5.148955] dwmmc_exynos 12220000.mmc: No vqmmc regulator found [ 5.176230] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 5.181849] usbcore: registered new interface driver usbhid [ 5.181864] usbhid: USB HID core driver [ 5.208875] NET: Registered protocol family 10 [ 5.210215] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 5.210415] mmc1: new high speed SDHC card at address 0001 [ 5.214325] mmcblk0: mmc1:0001 00000 29.8 GiB [ 5.214964] NET: Registered protocol family 17 [ 5.215090] NET: Registered protocol family 15 [ 5.216009] Registering SWP/SWPB emulation handler [ 5.216191] big.LITTLE switcher initializing [ 5.216201] CPU0 paired with CPU4 [ 5.216214] CPU6 paired with CPU3 [ 5.216226] GIC ID for CPU 0 cluster 1 is 4 [ 5.216237] GIC ID for CPU 0 cluster 0 is 0 [ 5.219472] mmcblk0: p1 p2 [ 5.331816] IRQ50 no longer affine to CPU1 [ 5.332495] [ 5.332500] =============================== [ 5.332505] [ INFO: suspicious RCU usage. ] [ 5.332512] 4.2.0-rc2-00314-gd80167b85024 #766 Not tainted [ 5.332516] ------------------------------- [ 5.332523] ../kernel/sched/fair.c:5032 suspicious rcu_dereference_check() usage! [ 5.332528] [ 5.332528] other info that might help us debug this: [ 5.332528] [ 5.332534] [ 5.332534] RCU used illegally from offline CPU! [ 5.332534] rcu_scheduler_active = 1, debug_locks = 0 [ 5.332541] 3 locks held by swapper/1/0: [ 5.332579] #0: ((cpu_died).wait.lock){......}, at: [] complete+0x14/0x44 [ 5.332608] #1: (&p->pi_lock){-.-.-.}, at: [] try_to_wake_up+0x28/0x384 [ 5.332634] #2: (rcu_read_lock){......}, at: [] select_task_rq_fair+0x5c/0xa04 [ 5.332639] [ 5.332639] stack backtrace: [ 5.332648] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc2-00314-gd80167b85024 #766 [ 5.332653] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 5.332673] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 5.332688] [] (show_stack) from [] (dump_stack+0x70/0xbc) [ 5.332699] [] (dump_stack) from [] (select_task_rq_fair+0x6e0/0xa04) [ 5.332711] [] (select_task_rq_fair) from [] (try_to_wake_up+0xec/0x384) [ 5.332723] [] (try_to_wake_up) from [] (__wake_up_common+0x4c/0x80) [ 5.332735] [] (__wake_up_common) from [] (__wake_up_locked+0x14/0x1c) [ 5.332747] [] (__wake_up_locked) from [] (complete+0x34/0x44) [ 5.332762] [] (complete) from [] (cpu_die+0x24/0x84) [ 5.332775] [] (cpu_die) from [] (cpu_startup_entry+0x1fc/0x26c) [ 5.332786] [] (cpu_startup_entry) from [<4000954c>] (0x4000954c) [ 5.332821] CPU1: shutdown [ 5.536906] GIC ID for CPU 1 cluster 0 is 1 [ 5.575879] cfg80211: Calling CRDA to update world regulatory domain [ 5.596169] IRQ51 no longer affine to CPU2 [ 5.596634] CPU2: shutdown [ 5.630984] GIC ID for CPU 2 cluster 0 is 2 [ 5.691113] IRQ52 no longer affine to CPU3 [ 5.691534] CPU3: shutdown [ 5.696908] usb 5-1.1: new high-speed USB device number 3 using exynos-ehci [ 5.730115] GIC ID for CPU 3 cluster 0 is 3 [ 5.791067] IRQ53 no longer affine to CPU4 [ 5.791482] CPU4: shutdown [ 5.806427] usb 5-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 5.811944] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.823573] smsc95xx v1.0.4 [ 5.824502] GIC ID for CPU 2 cluster 1 is 6 [ 5.834471] big.LITTLE switcher initialized [ 5.840774] of_get_named_gpiod_flags: parsed 'hpd-gpio' property of node '/hdmi@14530000[0]' - status (0) [ 5.851148] 14530000.hdmi supply hdmi-en not found, using dummy regulator