| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CY1PR06MB181702B549DC46FC53D20A88D1840@CY1PR06MB1817.namprd06.prod.outlook.com>
Date: Tue, 21 Jul 2015 02:15:33 +0000
From: Dudley Du <dudl@...ress.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
CC: "mark.rutland@....com" <mark.rutland@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"rydberg@...omail.se" <rydberg@...omail.se>,
"bleung@...gle.com" <bleung@...gle.com>,
"jmmahler@...il.com" <jmmahler@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v1 6/7] input: cyapa: add of match device support and
description document
> -----Original Message-----
> From: Dmitry Torokhov [mailto:dmitry.torokhov@...il.com]
> Sent: 2015?7?21? 8:15
> To: Dudley Du
> Cc: mark.rutland@....com; robh+dt@...nel.org; rydberg@...omail.se;
> bleung@...gle.com; jmmahler@...il.com; devicetree@...r.kernel.org;
> linux-input@...r.kernel.org; linux-kernel@...r.kernel.org
> Subject: Re: [PATCH v1 6/7] input: cyapa: add of match device support and
> description document
>
> On Mon, Jun 15, 2015 at 05:01:36PM +0800, Dudley Du wrote:
> > Add of_match_device mechanism support for Cypress trackpad device, and
> > add the sample description document of adding the trackpad device node in
> > device tree.
> > TEST=test on Chromebook.
> >
> > Signed-off-by: Dudley Du <dudl@...ress.com>
> > ---
> > .../devicetree/bindings/input/cypress,cyapa.txt | 44
> ++++++++++++++++++++++
> > .../devicetree/bindings/vendor-prefixes.txt | 1 +
> > drivers/input/mouse/cyapa.c | 10 +++++
> > 3 files changed, 55 insertions(+)
> > create mode 100644
> Documentation/devicetree/bindings/input/cypress,cyapa.txt
> >
> > diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt
> b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
> > new file mode 100644
> > index 0000000..9be2b44
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
> > @@ -0,0 +1,44 @@
> > +Cypress I2C Touchpad
> > +
> > +Required properties:
> > +- compatible: must be "cypress,cyapa".
> > +- reg: I2C address of the chip.
> > +- interrupt-parent: a phandle for the interrupt controller (see interrupt
> > + binding[0]).
> > +- interrupts: interrupt to which the chip is connected (see interrupt
> > + binding[0]).
> > +
> > +Optional properties:
> > +- wakeup-source: touchpad can be used as a wakeup source.
> > +- pinctrl-names: should be "default" (see pinctrl binding [1]).
> > +- pinctrl-0: a phandle pointing to the pin settings for the device (see
> > + pinctrl binding [1]).
> > +- vcc-supply: a phandle for the regulator supplying 3.3V power.
>
> I do not see it being used in the driver?
Thanks, I will add the vcc-supply code in the cyapa_probe routine.
And resubmit this patch.
>
> > +
> > +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> > +[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> > +
> > +Example:
> > +&i2c0 {
> > +/* ... */
> > +
> > +/* Cypress Gen3 touchpad */
> > +touchpad@67 {
> > +compatible = "cypress,cyapa";
> > +reg = <0x24>;
> > +interrupt-parent = <&gpio>;
> > +interrupts = <2 IRQ_TYPE_EDGE_FALLING>;/* GPIO 2 */
> > +wakeup-source;
> > +};
> > +
> > +/* Cypress Gen5 and later touchpad */
> > +touchpad@24 {
> > +compatible = "cypress,cyapa";
> > +reg = <0x24>;
> > +interrupt-parent = <&gpio>;
> > +interrupts = <2 IRQ_TYPE_EDGE_FALLING>;/* GPIO 2 */
> > +wakeup-source;
> > +};
> > +
> > +/* ... */
> > +};
> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt
> b/Documentation/devicetree/bindings/vendor-prefixes.txt
> > index ee2ce7b..e43d532 100644
> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> > @@ -54,6 +54,7 @@ cortinaCortina Systems, Inc.
> > cosmicCosmic Circuits
> > crystalfontzCrystalfontz America, Inc.
> > cubietechCubietech, Ltd.
> > +cypressCypress Semiconductor Corporation
> > dallasMaxim Integrated Products (formerly Dallas Semiconductor)
> > davicomDAVICOM Semiconductor, Inc.
> > deltaDelta Electronics, Inc.
> > diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
> > index 4e69594..7b6d6d4 100644
> > --- a/drivers/input/mouse/cyapa.c
> > +++ b/drivers/input/mouse/cyapa.c
> > @@ -25,6 +25,7 @@
> > #include <linux/uaccess.h>
> > #include <linux/pm_runtime.h>
> > #include <linux/acpi.h>
> > +#include <linux/of.h>
> > #include "cyapa.h"
> >
> >
> > @@ -1562,12 +1563,21 @@ static const struct acpi_device_id cyapa_acpi_id[] =
> {
> > MODULE_DEVICE_TABLE(acpi, cyapa_acpi_id);
> > #endif
> >
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id cyapa_of_match[] = {
> > +{ .compatible = "cypress,cyapa" },
> > +{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, cyapa_of_match);
> > +#endif
> > +
> > static struct i2c_driver cyapa_driver = {
> > .driver = {
> > .name = "cyapa",
> > .owner = THIS_MODULE,
> > .pm = &cyapa_pm_ops,
> > .acpi_match_table = ACPI_PTR(cyapa_acpi_id),
> > +.of_match_table = of_match_ptr(cyapa_of_match),
> > },
> >
> > .probe = cyapa_probe,
> > --
> > 1.9.1
> >
> >
> > ---------------------------------------------------------------
> > This message and any attachments may contain Cypress (or its
> > subsidiaries) confidential information. If it has been received
> > in error, please advise the sender and immediately delete this
> > message.
> > ---------------------------------------------------------------
> >
>
> --
> Dmitry
This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists