linux-kernel - [PATCH-v2 2/2] regulator: 88pm800: Add support for configuration of dual phase on BUCK1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1437495782-15767-3-git-send-email-vaibhav.hiremath@linaro.org>
Date:	Tue, 21 Jul 2015 21:53:02 +0530
From:	Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
To:	linux-arm-kernel@...ts.infradead.org
Cc:	robh+dt@...nel.org, devicetree@...r.kernel.org,
	lee.jones@...aro.org, broonie@...nel.org, k.kozlowski@...sung.com,
	linux-kernel@...r.kernel.org,
	Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
Subject: [PATCH-v2 2/2] regulator: 88pm800: Add support for configuration of dual phase on BUCK1

88PM860 device supports dual phase mode on BUCK1 output.
In normal usecase, BUCK1A and BUCK1B operates independently with 3A
capacity. And they both can work as a dual phase providing 6A capacity.

This patch updates the regulator driver to read the respective
DT property and enable dual-phase mode on BUCK1.

Note that, this is init time (one time) initialization.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
---
 drivers/regulator/88pm800.c | 31 +++++++++++++++++++++++++++++++
 include/linux/mfd/88pm80x.h |  3 +++
 2 files changed, 34 insertions(+)

diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c
index e846e4c..1bf2b35 100644
--- a/drivers/regulator/88pm800.c
+++ b/drivers/regulator/88pm800.c
@@ -267,6 +267,31 @@ static struct pm800_regulator_info pm860_regulator_info[] = {
 	PM800_LDO(ldo20, LDO20, LDO_ENA1_3, 3, 10000, ldo_volt_table2),
 };
 
+static int pm800_regulator_init(struct platform_device *pdev)
+{
+	struct pm800_regulators *pm800_data = platform_get_drvdata(pdev);
+	struct pm80x_chip *chip = pm800_data->chip;
+	int ret;
+
+	/* Currently only supported on 88pm860 device */
+	if (chip->type != CHIP_PM860)
+		return 0;
+
+	if (of_property_read_bool(pdev->dev.of_node,
+				"marvell,88pm860-buck1-dualphase-en")) {
+		ret = regmap_update_bits(chip->subchip->regmap_power,
+					PM860_BUCK1_MISC,
+					BUCK1_DUAL_PHASE_SEL,
+					BUCK1_DUAL_PHASE_SEL);
+		if (ret) {
+			dev_err(chip->dev, "failed to set dual-pase mode %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static int pm800_regulator_probe(struct platform_device *pdev)
 {
 	struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -336,6 +361,12 @@ static int pm800_regulator_probe(struct platform_device *pdev)
 		}
 	}
 
+	ret = pm800_regulator_init(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to init 88pm800 regulator device\n");
+		return ret;
+	}
+
 	return 0;
 }
 
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index a92d173..05d9bad 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -295,6 +295,9 @@ enum {
 #define PM860_BUCK4_MISC2		(0x82)
 #define PM860_BUCK4_FULL_DRV		BIT(2)
 
+#define PM860_BUCK1_MISC		(0x8E)
+#define BUCK1_DUAL_PHASE_SEL		BIT(2)
+
 struct pm80x_rtc_pdata {
 	int		vrtc;
 	int		rtc_wakeup;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/