lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150721195749.GM25385@saruman.tx.rr.com>
Date:	Tue, 21 Jul 2015 14:57:49 -0500
From:	Felipe Balbi <balbi@...com>
To:	Franklin S Cooper Jr <fcooper@...com>
CC:	<linux-omap@...r.kernel.org>, <linux-mmc@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <kishon@...com>, <rogerq@...com>,
	Lokesh Vutla <lokeshvutla@...com>,
	Murali Karicheri <m-karicheri2@...com>
Subject: Re: [PATCH] mmc: omap_hsmmc: Update driver to support without
 regulators

On Tue, Jul 14, 2015 at 02:29:46PM -0500, Franklin S Cooper Jr wrote:
> From: Roger Quadros <rogerq@...com>
> 
> Update driver to support without regulators.
> 
> Without this patch boards that do not enable regulator config options will
> fail to boot with a kernel panic.
> 
> Signed-off-by: Roger Quadros <rogerq@...com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@...com>
> Signed-off-by: Murali Karicheri <m-karicheri2@...com>
> Signed-off-by: Franklin S Cooper Jr <fcooper@...com>
> ---
>  Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt |  2 ++
>  drivers/mmc/host/omap_hsmmc.c                           | 14 ++++++++++----
>  2 files changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> index 76bf087..2408e87 100644
> --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> @@ -22,6 +22,8 @@ ti,dual-volt: boolean, supports dual voltage cards
>  ti,non-removable: non-removable slot (like eMMC)
>  ti,needs-special-reset: Requires a special softreset sequence
>  ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
> +voltage-ranges: Specify the voltage range supported if regulator framework
> +isn't enabled.
>  dmas: List of DMA specifiers with the controller specific format
>  as described in the generic DMA client binding. A tx and rx
>  specifier is required.
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index b2b411d..16c870f 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -1551,10 +1551,13 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  	if (ios->power_mode != host->power_mode) {
>  		switch (ios->power_mode) {
>  		case MMC_POWER_OFF:
> -			mmc_pdata(host)->set_power(host->dev, 0, 0);
> +			if (host->use_reg)
> +				mmc_pdata(host)->set_power(host->dev, 0, 0);

looks like this driver should just be use regulator_get_optional(), then
->set_power() would still work, no ?

-- 
balbi

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ