linux-kernel - [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 22 Jul 2015 22:05:42 +0800
From:	Chunfeng Yun <chunfeng.yun@...iatek.com>
To:	Mathias Nyman <mathias.nyman@...el.com>
CC:	Rob Herring <robh+dt@...nel.org>,
	Mark Rutland <mark.rutland@....com>,
	Matthias Brugger <matthias.bgg@...il.com>,
	Felipe Balbi <balbi@...com>,
	Chunfeng Yun <chunfeng.yun@...iatek.com>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	Roger Quadros <rogerq@...com>, <linux-usb@...r.kernel.org>,
	<linux-mediatek@...ts.infradead.org>,
	John Crispin <blogic@...nwrt.org>,
	Daniel Kurtz <djkurtz@...omium.org>
Subject: [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller

add a DT binding documentation of xHCI host controller for the
MT8173 SoC from Mediatek.

Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
 .../devicetree/bindings/usb/mt8173-xhci.txt        | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt

diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
new file mode 100644
index 0000000..444494d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
@@ -0,0 +1,50 @@
+MT65XX xhci
+
+The device node for Mediatek SOC usb3.0 host controller
+
+Required properties:
+ - compatible : supports "mediatek,mt8173-xhci"
+ - reg        : Offset and length of registers
+ - interrupts : Interrupt mode, number and trigger mode
+ - power-domains: to enable usb's mtcmos
+ - vusb33-supply:  regulator of usb avdd3.3v
+ - clocks     : must support all clocks that xhci needs
+ - clock-names: should be "sys_mac" for sys and mac clocks, and
+	"wakeup_deb_p0", "wakeup_deb_p1" for wakeup debounce control
+	clocks
+ - phys	: the phys that xhci will bind, currently supports up to two
+	phys, so phy index should not greater than one.
+ - phy-names : should be "phy-X" format, X equals to 0 or 1
+ - usb3-lpm-capable: supports USB3 LPM
+ - mediatek,usb-wakeup: to access usb wakeup control register
+ - mediatek,wakeup-src: 1: ip sleep wakeup mode; 2: line state wakeup
+	mode; others means don't enable wakeup source of usb
+ - mediatek,u2port-num: the number should not greater than the number
+	of phys
+
+Optional properties:
+ - vbus-supply : reference to the VBUS regulator;
+
+Example:
+usb: usb30@...70000 {
+	compatible = "mediatek,mt8173-xhci";
+	reg = <0 0x11270000 0 0x4000>,
+	      <0 0x11280000 0 0x0800>;
+	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+	clocks = <&topckgen CLK_TOP_USB30_SEL>,
+		 <&pericfg CLK_PERI_USB0>,
+		 <&pericfg CLK_PERI_USB1>;
+	clock-names = "sys_mac",
+		      "wakeup_deb_p0",
+		      "wakeup_deb_p1";
+	phys = <&u3phy 0>, <&u3phy 1>;
+	phy-names = "phy-0", "phy-1";
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+	usb3-lpm-capable;
+	mediatek,usb-wakeup = <&pericfg>;
+	mediatek,wakeup-src = <1>;
+	mediatek,u2port-num = <2>;
+	status = "okay";
+};
-- 
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/