| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1437584859-64203-3-git-send-email-shenwei.wang@freescale.com>
Date: Wed, 22 Jul 2015 12:07:39 -0500
From: Shenwei Wang <shenwei.wang@...escale.com>
To: <shawn.guo@...aro.org>, <tglx@...utronix.de>,
<jason@...edaemon.net>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <b20788@...escale.com>
Subject: [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D
IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.
GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4
domains. And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
After configuring the GPCv2 module, the platform can enter into a
selected mode either automatically triggered by ARM WFI instruction or
manually by software. The system will exit the low power states
by the predefined wakeup sources which are managed by the gpcv2
irqchip driver.
This patch adds a new suspend driver to manage the power states on IMX7D.
It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
Signed-off-by: Shenwei Wang <shenwei.wang@...escale.com>
Signed-off-by: Anson Huang <b20788@...escale.com>
---
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/Makefile | 2 +
arch/arm/mach-imx/pm-imx7.c | 765 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/suspend-imx7.S | 529 +++++++++++++++++++++++++++
4 files changed, 1297 insertions(+)
create mode 100644 arch/arm/mach-imx/pm-imx7.c
create mode 100644 arch/arm/mach-imx/suspend-imx7.S
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5ccc9ea..4269c1e 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -552,6 +552,7 @@ config SOC_IMX7D
bool "i.MX7 Dual support"
select PINCTRL_IMX7D
select ARM_GIC
+ select IMX_GPCV2
select HAVE_IMX_ANATOP
select HAVE_IMX_MMDC
help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 37c502a..b2ad476 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -87,6 +87,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
+AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_IMX_GPCV2) += suspend-imx7.o pm-imx7.o
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
diff --git a/arch/arm/mach-imx/pm-imx7.c b/arch/arm/mach-imx/pm-imx7.c
new file mode 100644
index 0000000..50b9af4
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx7.c
@@ -0,0 +1,765 @@
+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/fncpy.h>
+
+#include <soc/imx/gpcv2.h>
+
+extern struct imx_gpcv2_irq *gpcv2_irq_instance;
+static struct imx_gpcv2 *gpcv2_instance;
+
+static void imx_gpcv2_lpm_clear_slots(struct imx_gpcv2 *gpc)
+{
+ struct imx_gpcv2_irq *cd = gpc->irqchip;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&cd->lock, flags);
+ for (i = 0; i < MAX_SLOT_NUMBER; i++)
+ writel_relaxed(0x0, cd->gpc_base + GPC_SLOT0_CFG + i * 0x4);
+ writel_relaxed(BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP_ACK |
+ BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN_ACK,
+ cd->gpc_base + GPC_PGC_ACK_SEL_A7);
+
+ spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_gpcv2_lpm_enable_core(struct imx_gpcv2 *gpc,
+ bool enable, u32 offset)
+{
+ struct imx_gpcv2_irq *cd = gpc->irqchip;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cd->lock, flags);
+ writel_relaxed(enable, cd->gpc_base + offset);
+ spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_gpcv2_lpm_slot_setup(struct imx_gpcv2 *gpc,
+ u32 index, enum gpcv2_slot m_core, bool mode, bool ack)
+{
+ struct imx_gpcv2_irq *cd = gpc->irqchip;
+ unsigned long flags;
+ u32 val;
+
+ if (index >= MAX_SLOT_NUMBER)
+ pr_err("Invalid slot index!\n");
+
+ spin_lock_irqsave(&cd->lock, flags);
+ /* set slot */
+ writel_relaxed((mode + 1) << (m_core * 2), cd->gpc_base +
+ GPC_SLOT0_CFG + index * 4);
+
+ if (ack) {
+ /* set ack */
+ val = readl_relaxed(cd->gpc_base + GPC_PGC_ACK_SEL_A7);
+ /* clear dummy ack */
+ val &= ~(1 << (15 + (mode ? 16 : 0)));
+ val |= 1 << (m_core + (mode ? 16 : 0));
+ writel_relaxed(val, cd->gpc_base + GPC_PGC_ACK_SEL_A7);
+ }
+
+ spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_gpcv2_lpm_env_setup(struct imx_gpcv2 *gpc)
+{
+ struct imx_gpcv2_suspend *pm = gpc->pm;
+
+ /* PLL and PFDs overwrite set */
+ regmap_write(pm->anatop, ANADIG_ARM_PLL + REG_SET, 1 << 20);
+ regmap_write(pm->anatop, ANADIG_DDR_PLL + REG_SET, 1 << 19);
+ regmap_write(pm->anatop, ANADIG_SYS_PLL + REG_SET, 0x1ff << 17);
+ regmap_write(pm->anatop, ANADIG_ENET_PLL + REG_SET, 1 << 13);
+ regmap_write(pm->anatop, ANADIG_AUDIO_PLL + REG_SET, 1 << 24);
+ regmap_write(pm->anatop, ANADIG_VIDEO_PLL + REG_SET, 1 << 24);
+}
+
+static void imx_gpcv2_lpm_env_clean(struct imx_gpcv2 *gpc)
+{
+ struct imx_gpcv2_suspend *pm = gpc->pm;
+
+ /* PLL and PFDs overwrite clear */
+ regmap_write(pm->anatop, ANADIG_ARM_PLL + REG_CLR, 1 << 20);
+ regmap_write(pm->anatop, ANADIG_DDR_PLL + REG_CLR, 1 << 19);
+ regmap_write(pm->anatop, ANADIG_SYS_PLL + REG_CLR, 0x1ff << 17);
+ regmap_write(pm->anatop, ANADIG_ENET_PLL + REG_CLR, 1 << 13);
+ regmap_write(pm->anatop, ANADIG_AUDIO_PLL + REG_CLR, 1 << 24);
+ regmap_write(pm->anatop, ANADIG_VIDEO_PLL + REG_CLR, 1 << 24);
+}
+
+static void imx_gpcv2_lpm_set_mode(struct imx_gpcv2 *gpc,
+ enum gpcv2_mode mode)
+{
+ struct imx_gpcv2_irq *cd = gpc->irqchip;
+ unsigned long flags;
+ u32 val1, val2;
+
+ spin_lock_irqsave(&cd->lock, flags);
+
+ val1 = readl_relaxed(cd->gpc_base + GPC_LPCR_A7_BSC);
+ val2 = readl_relaxed(cd->gpc_base + GPC_SLPCR);
+
+ /* all cores' LPM settings must be same */
+ val1 &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
+
+ val1 |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+
+ val2 &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN |
+ BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
+ /*
+ * GPCv2: When improper low-power sequence is used,
+ * the SoC enters low power mode before the ARM core executes WFI.
+ *
+ * Software workaround:
+ * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
+ * by setting IOMUX_GPR1_IRQ.
+ * 2) Software should then unmask IRQ #32 in GPC before setting GPC
+ * Low-Power mode.
+ * 3) Software should mask IRQ #32 right after GPC Low-Power mode
+ * is set.
+ */
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ val1 |= A7_LPM_WAIT << BP_LPCR_A7_BSC_LPM0;
+ val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+ break;
+ case STOP_POWER_ON:
+ val1 |= A7_LPM_STOP << BP_LPCR_A7_BSC_LPM0;
+ val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+ val2 |= BM_SLPCR_EN_DSM;
+ val2 |= BM_SLPCR_RBC_EN;
+ val2 |= BM_SLPCR_BYPASS_PMIC_READY;
+ break;
+ case STOP_POWER_OFF:
+ val1 |= A7_LPM_STOP << BP_LPCR_A7_BSC_LPM0;
+ val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+ val2 |= BM_SLPCR_EN_DSM;
+ val2 |= BM_SLPCR_RBC_EN;
+ val2 |= BM_SLPCR_SBYOS;
+ val2 |= BM_SLPCR_VSTBY;
+ val2 |= BM_SLPCR_BYPASS_PMIC_READY;
+ break;
+ default:
+ return;
+ }
+ writel_relaxed(val1, cd->gpc_base + GPC_LPCR_A7_BSC);
+ writel_relaxed(val2, cd->gpc_base + GPC_SLPCR);
+
+ spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+
+static void imx_gpcv2_lpm_cpu_power_gate(struct imx_gpcv2 *gpc,
+ u32 cpu, bool pdn)
+{
+ struct imx_gpcv2_irq *cd = gpc->irqchip;
+ unsigned long flags;
+ u32 val;
+
+ const u32 val_pdn[2] = {
+ BM_LPCR_A7_AD_EN_C0_PDN | BM_LPCR_A7_AD_EN_C0_PUP,
+ BM_LPCR_A7_AD_EN_C1_PDN | BM_LPCR_A7_AD_EN_C1_PUP,
+ };
+
+ spin_lock_irqsave(&cd->lock, flags);
+
+ val = readl_relaxed(cd->gpc_base + GPC_LPCR_A7_AD);
+ if (pdn)
+ val |= val_pdn[cpu];
+ else
+ val &= ~val_pdn[cpu];
+
+ writel_relaxed(val, cd->gpc_base + GPC_LPCR_A7_AD);
+ spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_lpm_plat_power_gate(struct imx_gpcv2 *gpc, bool pdn)
+{
+ struct imx_gpcv2_irq *cd = gpc->irqchip;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&cd->lock, flags);
+ val = readl_relaxed(cd->gpc_base + GPC_LPCR_A7_AD);
+ val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
+ if (pdn)
+ val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
+
+ writel_relaxed(val, cd->gpc_base + GPC_LPCR_A7_AD);
+ spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_gpcv2_lpm_standby(struct imx_gpcv2 *gpc)
+{
+ struct imx_gpcv2_suspend *pm = gpc->pm;
+
+ pm->lpm_env_setup(gpc);
+ /* pm->set_mode(gpc, STOP_POWER_OFF); */
+ pm->set_mode(gpc, WAIT_UNCLOCKED);
+
+ pr_debug("[GPCv2] %s %d\r\n", __func__, __LINE__);
+ /* Zzz ... */
+ cpu_do_idle();
+
+ pm->set_mode(gpc, WAIT_CLOCKED);
+ pm->lpm_env_clean(gpc);
+}
+
+
+
+static int gpcv2_suspend_finish(unsigned long val)
+{
+ struct imx_gpcv2_suspend *pm = (struct imx_gpcv2_suspend *)val;
+
+ if (!pm->suspend_fn_in_ocram) {
+ cpu_do_idle();
+ } else {
+ /*
+ * call low level suspend function in ocram,
+ * as we need to float DDR IO.
+ */
+ local_flush_tlb_all();
+ pm->suspend_fn_in_ocram(pm->ocram_vbase);
+ }
+
+ return 0;
+}
+static void imx_gpcv2_lpm_suspend(struct imx_gpcv2 *gpc)
+{
+ struct imx_gpcv2_suspend *pm = gpc->pm;
+ struct imx_gpcv2_irq *cd = gpc->irqchip;
+ int i = 0;
+
+ pm->lpm_env_setup(gpc);
+ pm->set_mode(gpc, STOP_POWER_OFF);
+
+ /* enable core0 power down/up with low power mode */
+ pm->lpm_cpu_power_gate(gpc, 0, true);
+
+ /* enable plat power down with low power mode */
+ pm->lpm_plat_power_gate(gpc, true);
+
+
+ /*
+ * To avoid confuse, we use slot 0~4 for power down,
+ * slot 5~9 for power up.
+ *
+ * Power down slot sequence:
+ * Slot0 -> CORE0
+ * Slot1 -> Mega/Fast MIX
+ * Slot2 -> SCU
+ *
+ * Power up slot sequence:
+ * Slot5 -> Mega/Fast MIX
+ * Slot6 -> SCU
+ * Slot7 -> CORE0
+ */
+ pm->set_slot(gpc, 0, CORE0_A7, false, false);
+ pm->set_slot(gpc, 2, SCU_A7, false, true);
+
+ for (i = 0; i < IMR_NUM; i++) {
+ if ((~cd->wakeup_sources[i] & pm->mfmix_mask[i]) != 0)
+ break;
+
+ pm->set_slot(gpc, 1, FAST_MEGA_MIX, false, false);
+ pm->set_slot(gpc, 5, FAST_MEGA_MIX, true, false);
+ pm->lpm_enable_core(gpc, true, GPC_PGC_FM);
+ break;
+ }
+
+ pm->set_slot(gpc, 6, SCU_A7, true, false);
+ pm->set_slot(gpc, 7, CORE0_A7, true, true);
+
+ /* enable core0, scu */
+ pm->lpm_enable_core(gpc, true, GPC_PGC_C0);
+ pm->lpm_enable_core(gpc, true, GPC_PGC_SCU);
+
+ /* Suspend to MEM has not been implemented yet */
+ cpu_suspend((unsigned long)pm, gpcv2_suspend_finish);
+
+ pm->lpm_env_clean(gpc);
+ pm->set_mode(gpc, WAIT_CLOCKED);
+ pm->lpm_cpu_power_gate(gpc, 0, false);
+ pm->lpm_plat_power_gate(gpc, false);
+
+ pm->lpm_enable_core(gpc, false, GPC_PGC_C0);
+ pm->lpm_enable_core(gpc, false, GPC_PGC_SCU);
+ pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
+ pm->clear_slots(gpc);
+}
+
+static int imx_gpcv2_pm_enter(suspend_state_t state)
+{
+ struct imx_gpcv2_suspend *pm;
+
+ BUG_ON(!gpcv2_instance);
+ pm = gpcv2_instance->pm;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pm->standby(gpcv2_instance);
+ break;
+
+ case PM_SUSPEND_MEM:
+ pm->suspend(gpcv2_instance);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static int imx_gpcv2_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops imx_gpcv2_pm_ops = {
+ .enter = imx_gpcv2_pm_enter,
+ .valid = imx_gpcv2_pm_valid,
+};
+
+
+#define MX7_MAX_DDRC_NUM 32
+#define MX7_MAX_DDRC_PHY_NUM 16
+
+#define READ_DATA_FROM_HARDWARE 0
+#define MX7_SUSPEND_OCRAM_SIZE 0x1000
+
+struct imx7_pm_base {
+ phys_addr_t pbase;
+ void __iomem *vbase;
+};
+
+struct imx7_pm_socdata {
+ u32 ddr_type;
+ const char *ddrc_compat;
+ const char *ddrc_phy_compat;
+ const char *src_compat;
+ const char *iomuxc_gpr_compat;
+ const char *ccm_compat;
+ const char *gpc_compat;
+ const char *anatop_compat;
+ const u32 ddrc_num;
+ const u32 (*ddrc_offset)[2];
+ const u32 ddrc_phy_num;
+ const u32 (*ddrc_phy_offset)[2];
+};
+
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-imx7.S), if this struct
+ * definition is changed, the offset definition in
+ * arch/arm/mach-imx/suspend-imx7.S must be also changed accordingly,
+ * otherwise, the suspend to ocram function will be broken!
+ */
+struct imx7_cpu_pm_info {
+ u32 m4_reserve0;
+ u32 m4_reserve1;
+ u32 m4_reserve2;
+
+ /* The physical address of pm_info. */
+ phys_addr_t pbase;
+
+ /* The physical resume address for asm code */
+ phys_addr_t resume_addr;
+ u32 ddr_type;
+
+ u32 pm_info_size;
+ struct imx7_pm_base ddrc_base;
+ struct imx7_pm_base ddrc_phy_base;
+ struct imx7_pm_base src_base;
+ struct imx7_pm_base iomuxc_gpr_base;
+ struct imx7_pm_base ccm_base;
+ struct imx7_pm_base gpc_base;
+ struct imx7_pm_base l2_base;
+ struct imx7_pm_base anatop_base;
+ u32 ttbr1;
+
+ /* Number of DDRC which need saved/restored. */
+ u32 ddrc_num;
+
+ /* To save offset and value */
+ u32 ddrc_val[MX7_MAX_DDRC_NUM][2];
+
+ /* Number of DDRC which need saved/restored. */
+ u32 ddrc_phy_num;
+
+ /* To save offset and value */
+ u32 ddrc_phy_val[MX7_MAX_DDRC_NUM][2];
+} __aligned(8);
+
+
+static int __init imx_get_base_from_node(struct device_node *node,
+ struct imx7_pm_base *base)
+{
+ struct resource res;
+ int ret = 0;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = ioremap(res.start, resource_size(&res));
+ if (!base->vbase) {
+ iounmap(base->vbase);
+ ret = -ENOMEM;
+ }
+put_node:
+ of_node_put(node);
+
+ return ret;
+}
+
+static int __init imx_get_base_from_dt(struct imx7_pm_base *base,
+ const char *compat)
+{
+ struct device_node *node;
+ struct resource res;
+ int ret = 0;
+
+ node = of_find_compatible_node(NULL, NULL, compat);
+ if (!node) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = ioremap(res.start, resource_size(&res));
+ if (!base->vbase)
+ ret = -ENOMEM;
+
+put_node:
+ of_node_put(node);
+out:
+ return ret;
+}
+
+static int __init imx_get_exec_base_from_dt(struct imx7_pm_base *base,
+ const char *compat)
+{
+ struct device_node *node;
+ struct resource res;
+ int ret = 0;
+
+ node = of_find_compatible_node(NULL, NULL, compat);
+ if (!node) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = __arm_ioremap_exec(res.start, resource_size(&res), false);
+
+ if (!base->vbase)
+ ret = -ENOMEM;
+
+put_node:
+ of_node_put(node);
+out:
+ return ret;
+}
+
+static const u32 imx7d_ddrc_ddr3_setting[][2] __initconst = {
+ { 0x0, READ_DATA_FROM_HARDWARE },
+ { 0x1a0, READ_DATA_FROM_HARDWARE },
+ { 0x1a4, READ_DATA_FROM_HARDWARE },
+ { 0x1a8, READ_DATA_FROM_HARDWARE },
+ { 0x64, READ_DATA_FROM_HARDWARE },
+ { 0x490, 0x00000001 },
+ { 0xd0, 0xc0020001 },
+ { 0xd4, READ_DATA_FROM_HARDWARE },
+ { 0xdc, READ_DATA_FROM_HARDWARE },
+ { 0xe0, READ_DATA_FROM_HARDWARE },
+ { 0xe4, READ_DATA_FROM_HARDWARE },
+ { 0xf4, READ_DATA_FROM_HARDWARE },
+ { 0x100, READ_DATA_FROM_HARDWARE },
+ { 0x104, READ_DATA_FROM_HARDWARE },
+ { 0x108, READ_DATA_FROM_HARDWARE },
+ { 0x10c, READ_DATA_FROM_HARDWARE },
+ { 0x110, READ_DATA_FROM_HARDWARE },
+ { 0x114, READ_DATA_FROM_HARDWARE },
+ { 0x120, 0x03030803 },
+ { 0x180, READ_DATA_FROM_HARDWARE },
+ { 0x190, READ_DATA_FROM_HARDWARE },
+ { 0x194, READ_DATA_FROM_HARDWARE },
+ { 0x200, READ_DATA_FROM_HARDWARE },
+ { 0x204, READ_DATA_FROM_HARDWARE },
+ { 0x214, READ_DATA_FROM_HARDWARE },
+ { 0x218, READ_DATA_FROM_HARDWARE },
+ { 0x240, 0x06000601 },
+ { 0x244, READ_DATA_FROM_HARDWARE },
+};
+
+static const u32 imx7d_ddrc_phy_ddr3_setting[][2] __initconst = {
+ { 0x0, READ_DATA_FROM_HARDWARE },
+ { 0x4, READ_DATA_FROM_HARDWARE },
+ { 0x10, READ_DATA_FROM_HARDWARE },
+ { 0x9c, READ_DATA_FROM_HARDWARE },
+ { 0x20, READ_DATA_FROM_HARDWARE },
+ { 0x30, READ_DATA_FROM_HARDWARE },
+ { 0x50, 0x01000010 },
+ { 0x50, 0x00000010 },
+ { 0xc0, 0x0e407304 },
+ { 0xc0, 0x0e447304 },
+ { 0xc0, 0x0e447306 },
+ { 0xc0, 0x0e447304 },
+ { 0xc0, 0x0e407306 },
+};
+
+static const struct imx7_pm_socdata imx7d_pm_data_ddr3 __initconst = {
+ .ddrc_compat = "fsl,imx7d-ddrc",
+ .ddrc_phy_compat = "fsl,imx7d-ddrc-phy",
+ .ccm_compat = "fsl,imx7d-ccm",
+ .src_compat = "fsl,imx7d-src",
+ .iomuxc_gpr_compat = "fsl,imx7d-iomuxc",
+ .gpc_compat = "fsl,imx7d-gpc",
+ .anatop_compat = "fsl,imx7d-anatop",
+ .ddrc_num = ARRAY_SIZE(imx7d_ddrc_ddr3_setting),
+ .ddrc_offset = imx7d_ddrc_ddr3_setting,
+ .ddrc_phy_num = ARRAY_SIZE(imx7d_ddrc_phy_ddr3_setting),
+ .ddrc_phy_offset = imx7d_ddrc_phy_ddr3_setting,
+};
+
+
+static int __init imx_gpcv2_suspend_init(struct imx_gpcv2_suspend *pm,
+ const struct imx7_pm_socdata *socdata)
+{
+ struct imx7_pm_base aips_base[3] = { {0, 0}, {0, 0}, {0, 0} };
+ struct imx7_pm_base sram_base = {0, 0};
+ struct imx7_cpu_pm_info *pm_info;
+ struct device_node *node;
+ int i, ret = 0;
+
+ const u32 (*ddrc_offset_array)[2];
+ const u32 (*ddrc_phy_offset_array)[2];
+
+ if (!socdata || !pm) {
+ pr_warn("%s: invalid argument!\n", __func__);
+ return -EINVAL;
+ }
+
+ node = NULL;
+ for (i = 0; i < 3; i++) {
+ node = of_find_compatible_node(node, NULL, "fsl,aips-bus");
+ if (!node) {
+ pr_warn("%s: failed to find aips %d node!\n",
+ __func__, i);
+ break;
+ }
+ ret = imx_get_base_from_node(node, &aips_base[i]);
+ if (ret) {
+ pr_warn("%s: failed to get aips[%d] base %d!\n",
+ __func__, i, ret);
+ }
+ }
+
+ ret = imx_get_exec_base_from_dt(&sram_base, "fsl,lpm-sram");
+ if (ret) {
+ pr_warn("%s: failed to get lpm-sram base %d!\n",
+ __func__, ret);
+ goto lpm_sram_map_failed;
+ }
+
+ pm_info = sram_base.vbase;
+ pm_info->pbase = sram_base.pbase;
+ pm_info->resume_addr = virt_to_phys(ca7_cpu_resume);
+ pm_info->pm_info_size = sizeof(*pm_info);
+
+ ret = imx_get_base_from_dt(&pm_info->ccm_base, socdata->ccm_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ccm base %d!\n", __func__, ret);
+ goto ccm_map_failed;
+ }
+
+
+ ret = imx_get_base_from_dt(&pm_info->ddrc_base, socdata->ddrc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ddrc base %d!\n", __func__, ret);
+ goto ddrc_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->ddrc_phy_base,
+ socdata->ddrc_phy_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ddrc_phy base %d!\n", __func__, ret);
+ goto ddrc_phy_map_failed;
+ }
+
+
+ ret = imx_get_base_from_dt(&pm_info->src_base, socdata->src_compat);
+ if (ret) {
+ pr_warn("%s: failed to get src base %d!\n", __func__, ret);
+ goto src_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->iomuxc_gpr_base,
+ socdata->iomuxc_gpr_compat);
+ if (ret) {
+ pr_warn("%s: failed to get iomuxc_gpr base %d!\n",
+ __func__, ret);
+ goto iomuxc_gpr_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->gpc_base, socdata->gpc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
+ goto gpc_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->anatop_base,
+ socdata->anatop_compat);
+ if (ret) {
+ pr_warn("%s: failed to get anatop base %d!\n", __func__, ret);
+ goto anatop_map_failed;
+ }
+
+ pm_info->ddrc_num = socdata->ddrc_num;
+ ddrc_offset_array = socdata->ddrc_offset;
+ pm_info->ddrc_phy_num = socdata->ddrc_phy_num;
+ ddrc_phy_offset_array = socdata->ddrc_phy_offset;
+
+ /* initialize DDRC settings */
+ for (i = 0; i < pm_info->ddrc_num; i++) {
+ pm_info->ddrc_val[i][0] = ddrc_offset_array[i][0];
+ if (ddrc_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
+ pm_info->ddrc_val[i][1] =
+ readl_relaxed(pm_info->ddrc_base.vbase +
+ ddrc_offset_array[i][0]);
+ else
+ pm_info->ddrc_val[i][1] = ddrc_offset_array[i][1];
+ }
+
+ /* initialize DDRC PHY settings */
+ for (i = 0; i < pm_info->ddrc_phy_num; i++) {
+ pm_info->ddrc_phy_val[i][0] =
+ ddrc_phy_offset_array[i][0];
+ if (ddrc_phy_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
+ pm_info->ddrc_phy_val[i][1] =
+ readl_relaxed(pm_info->ddrc_phy_base.vbase +
+ ddrc_phy_offset_array[i][0]);
+ else
+ pm_info->ddrc_phy_val[i][1] =
+ ddrc_phy_offset_array[i][1];
+ }
+
+ pm->suspend_fn_in_ocram = fncpy(
+ sram_base.vbase + sizeof(*pm_info),
+ &imx7_suspend,
+ MX7_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
+ pm->ocram_vbase = sram_base.vbase;
+
+ goto put_node;
+
+anatop_map_failed:
+ iounmap(pm_info->anatop_base.vbase);
+gpc_map_failed:
+ iounmap(pm_info->gpc_base.vbase);
+iomuxc_gpr_map_failed:
+ iounmap(pm_info->iomuxc_gpr_base.vbase);
+src_map_failed:
+ iounmap(pm_info->src_base.vbase);
+ddrc_phy_map_failed:
+ iounmap(pm_info->ddrc_phy_base.vbase);
+ddrc_map_failed:
+ iounmap(pm_info->ddrc_base.vbase);
+ccm_map_failed:
+ iounmap(pm_info->ccm_base.vbase);
+lpm_sram_map_failed:
+ iounmap(sram_base.vbase);
+put_node:
+ of_node_put(node);
+
+ return ret;
+}
+
+static int __init imx_gpcv2_pm_init(void)
+{
+ struct imx_gpcv2_suspend *pm;
+ struct imx_gpcv2_irq *cd;
+ struct imx_gpcv2 *gpc;
+
+ pm = kzalloc(sizeof(struct imx_gpcv2_suspend), GFP_KERNEL);
+ gpc = kzalloc(sizeof(struct imx_gpcv2), GFP_KERNEL);
+ cd = gpcv2_irq_instance;
+
+ if (!cd || !pm || !gpc) {
+ pr_debug("[GPCv2] %s init failed\r\n", __func__);
+ return 0;
+ }
+
+
+ imx_gpcv2_suspend_init(pm, &imx7d_pm_data_ddr3);
+
+ pm->lpm_env_setup = imx_gpcv2_lpm_env_setup;
+ pm->lpm_env_clean = imx_gpcv2_lpm_env_clean;
+
+ pm->lpm_cpu_power_gate = imx_gpcv2_lpm_cpu_power_gate;
+ pm->lpm_plat_power_gate = imx_lpm_plat_power_gate;
+ pm->lpm_enable_core = imx_gpcv2_lpm_enable_core;
+ pm->set_mode = imx_gpcv2_lpm_set_mode;
+
+ pm->clear_slots = imx_gpcv2_lpm_clear_slots;
+ pm->set_slot = imx_gpcv2_lpm_slot_setup;
+
+ pm->standby = imx_gpcv2_lpm_standby;
+ pm->suspend = imx_gpcv2_lpm_suspend;
+
+ pr_debug("[GPCv2] %s \r\n", __func__);
+ pm->anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+ WARN_ON(!pm->anatop);
+ pm->imx_src = syscon_regmap_lookup_by_compatible("fsl,imx7d-src");
+ WARN_ON(!pm->imx_src);
+
+ /*
+ * Due to hardware design failure, need to make sure GPR
+ * interrupt(#32) is unmasked during RUN mode to avoid entering
+ * DSM by mistake.
+ */
+ writel_relaxed(~0x1, cd->gpc_base + cd->cpu2wakeup);
+
+ /* Mask the wakeup sources in M/F power domain */
+ pm->mfmix_mask[0] = 0x54010000;
+ pm->mfmix_mask[1] = 0xc00;
+ pm->mfmix_mask[2] = 0x0;
+ pm->mfmix_mask[3] = 0x400010;
+
+ gpc->pm = pm;
+ gpc->irqchip = cd;
+ gpcv2_instance = gpc;
+
+ suspend_set_ops(&imx_gpcv2_pm_ops);
+
+ return 0;
+}
+
+device_initcall(imx_gpcv2_pm_init);
+
diff --git a/arch/arm/mach-imx/suspend-imx7.S b/arch/arm/mach-imx/suspend-imx7.S
new file mode 100644
index 0000000..8c3f516
--- /dev/null
+++ b/arch/arm/mach-imx/suspend-imx7.S
@@ -0,0 +1,529 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include "hardware.h"
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * Better to follow below rules to use ARM registers:
+ * r0: pm_info structure address;
+ * r1 ~ r4: for saving pm_info members;
+ * r5 ~ r10: free registers;
+ * r11: io base address.
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ * .
+ * .
+ * .
+ * ^
+ * ^
+ * ^
+ * imx7_suspend code
+ * PM_INFO structure(imx7_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+/*
+ * Below offsets are based on struct imx7_cpu_pm_info
+ * which defined in arch/arm/mach-imx/pm-imx7.c, this
+ * structure contains necessary pm info for low level
+ * suspend related code.
+ */
+#define PM_INFO_M4_RESERVE0_OFFSET 0x0
+#define PM_INFO_M4_RESERVE1_OFFSET 0x4
+#define PM_INFO_M4_RESERVE2_OFFSET 0x8
+#define PM_INFO_PBASE_OFFSET 0xc
+#define PM_INFO_RESUME_ADDR_OFFSET 0x10
+#define PM_INFO_DDR_TYPE_OFFSET 0x14
+#define PM_INFO_PM_INFO_SIZE_OFFSET 0x18
+#define PM_INFO_MX7_DDRC_P_OFFSET 0x1c
+#define PM_INFO_MX7_DDRC_V_OFFSET 0x20
+#define PM_INFO_MX7_DDRC_PHY_P_OFFSET 0x24
+#define PM_INFO_MX7_DDRC_PHY_V_OFFSET 0x28
+#define PM_INFO_MX7_SRC_P_OFFSET 0x2c
+#define PM_INFO_MX7_SRC_V_OFFSET 0x30
+#define PM_INFO_MX7_IOMUXC_GPR_P_OFFSET 0x34
+#define PM_INFO_MX7_IOMUXC_GPR_V_OFFSET 0x38
+#define PM_INFO_MX7_CCM_P_OFFSET 0x3c
+#define PM_INFO_MX7_CCM_V_OFFSET 0x40
+#define PM_INFO_MX7_GPC_P_OFFSET 0x44
+#define PM_INFO_MX7_GPC_V_OFFSET 0x48
+#define PM_INFO_MX7_L2_P_OFFSET 0x4c
+#define PM_INFO_MX7_L2_V_OFFSET 0x50
+#define PM_INFO_MX7_ANATOP_P_OFFSET 0x54
+#define PM_INFO_MX7_ANATOP_V_OFFSET 0x58
+#define PM_INFO_MX7_TTBR1_V_OFFSET 0x5c
+#define PM_INFO_DDRC_REG_NUM_OFFSET 0x60
+#define PM_INFO_DDRC_REG_OFFSET 0x64
+#define PM_INFO_DDRC_VALUE_OFFSET 0x68
+#define PM_INFO_DDRC_PHY_REG_NUM_OFFSET 0x164
+#define PM_INFO_DDRC_PHY_REG_OFFSET 0x168
+#define PM_INFO_DDRC_PHY_VALUE_OFFSET 0x16c
+
+#define MX7_SRC_GPR1 0x74
+#define MX7_SRC_GPR2 0x78
+#define GPC_PGC_FM 0xa00
+#define ANADIG_SNVS_MISC_CTRL 0x380
+#define DDRC_STAT 0x4
+#define DDRC_PWRCTL 0x30
+#define DDRC_PSTAT 0x3fc
+#define DDRC_PCTRL_0 0x490
+#define DDRC_DFIMISC 0x1b0
+#define DDRC_SWCTL 0x320
+#define DDRC_SWSTAT 0x324
+#define DDRPHY_LP_CON0 0x18
+
+ .align 3
+
+ .macro disable_l1_dcache
+
+ /*
+ * Flush all data from the L1 data cache before disabling
+ * SCTLR.C bit.
+ */
+ push {r0 - r10, lr}
+ ldr r7, =v7_flush_dcache_all
+ mov lr, pc
+ mov pc, r7
+ pop {r0 - r10, lr}
+
+ /* disable d-cache */
+ mrc p15, 0, r7, c1, c0, 0
+ bic r7, r7, #(1 << 2)
+ mcr p15, 0, r7, c1, c0, 0
+ dsb
+ isb
+
+ push {r0 - r10, lr}
+ ldr r7, =v7_flush_dcache_all
+ mov lr, pc
+ mov pc, r7
+ pop {r0 - r10, lr}
+
+ .endm
+
+
+ .macro enable_l1_dcache
+
+ /* Enable L1 data cache. */
+ mrc p15, 0, r6, c1, c0, 0
+ orr r6, r6, #0x4
+ mcr p15, 0, r6, c1, c0, 0
+
+ dsb
+ isb
+
+ .endm
+
+
+ .macro ddrc_enter_self_refresh
+
+ ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait rw port_busy clear */
+ ldr r6, =(0x1 << 16)
+ orr r6, r6, #0x1
+1:
+ ldr r7, [r11, #DDRC_PSTAT]
+ ands r7, r7, r6
+ bne 1b
+
+ /* enter self-refresh bit 5 */
+ ldr r7, =(0x1 << 5)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait until self-refresh mode entered */
+2:
+ ldr r7, [r11, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ bne 2b
+3:
+ ldr r7, [r11, #DDRC_STAT]
+ ands r7, r7, #0x20
+ beq 3b
+
+ /* disable dram clk */
+ ldr r7, [r11, #DDRC_PWRCTL]
+ orr r7, r7, #(1 << 3)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ .endm
+
+ .macro ddrc_exit_self_refresh
+
+ cmp r5, #0x0
+ ldreq r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ ldrne r11, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait until self-refresh mode entered */
+4:
+ ldr r7, [r11, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ beq 4b
+
+ /* enable auto self-refresh */
+ ldr r7, [r11, #DDRC_PWRCTL]
+ orr r7, r7, #(1 << 0)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ .endm
+
+ .macro wait_delay
+5:
+ subs r6, r6, #0x1
+ bne 5b
+
+ .endm
+
+ .macro ddr_enter_retention
+
+ ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r11, #DDRC_PCTRL_0]
+
+ /* wait rw port_busy clear */
+ ldr r6, =(0x1 << 16)
+ orr r6, r6, #0x1
+6:
+ ldr r7, [r11, #DDRC_PSTAT]
+ ands r7, r7, r6
+ bne 6b
+
+ ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ /* enter self-refresh bit 5 */
+ ldr r7, =(0x1 << 5)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait until self-refresh mode entered */
+7:
+ ldr r7, [r11, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ bne 7b
+8:
+ ldr r7, [r11, #DDRC_STAT]
+ ands r7, r7, #0x20
+ beq 8b
+
+ /* disable dram clk */
+ ldr r7, =(0x1 << 5)
+ orr r7, r7, #(1 << 3)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* reset ddr_phy */
+ ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldr r7, =0x0
+ str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
+
+ /* delay 7 us */
+ ldr r6, =6000
+ wait_delay
+
+ ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ ldr r6, =0x1000
+ ldr r7, [r11, r6]
+ orr r7, r7, #0x1
+ str r7, [r11, r6]
+ /* turn off ddr power */
+ ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldr r7, =(0x1 << 29)
+ str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
+
+ .endm
+
+ .macro ddr_exit_retention
+
+ cmp r5, #0x0
+ ldreq r1, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldrne r1, [r0, #PM_INFO_MX7_ANATOP_P_OFFSET]
+ ldreq r2, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ ldrne r2, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
+ ldreq r3, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ ldrne r3, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
+ ldreq r4, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
+ ldrne r4, [r0, #PM_INFO_MX7_DDRC_PHY_P_OFFSET]
+ ldreq r10, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
+ ldrne r10, [r0, #PM_INFO_MX7_CCM_P_OFFSET]
+ ldreq r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+ ldrne r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_P_OFFSET]
+
+ /* turn on ddr power */
+ ldr r7, =(0x1 << 29)
+ str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+ ldr r6, =50
+ wait_delay
+
+ ldr r7, =0x0
+ str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+ /* clear ddr_phy reset */
+ ldr r6, =0x1000
+ ldr r7, [r2, r6]
+ orr r7, r7, #0x3
+ str r7, [r2, r6]
+ ldr r7, [r2, r6]
+ bic r7, r7, #0x1
+ str r7, [r2, r6]
+
+ ldr r6, [r0, #PM_INFO_DDRC_REG_NUM_OFFSET]
+ ldr r7, =PM_INFO_DDRC_REG_OFFSET
+ add r7, r7, r0
+9:
+ ldr r8, [r7], #0x4
+ ldr r9, [r7], #0x4
+ str r9, [r3, r8]
+ subs r6, r6, #0x1
+ bne 9b
+ ldr r7, =0x20
+ str r7, [r3, #DDRC_PWRCTL]
+ ldr r7, =0x0
+ str r7, [r3, #DDRC_DFIMISC]
+
+ /* do PHY, clear ddr_phy reset */
+ ldr r6, =0x1000
+ ldr r7, [r2, r6]
+ bic r7, r7, #0x2
+ str r7, [r2, r6]
+
+ ldr r7, =(0x1 << 30)
+ str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+ /* need to delay ~5mS */
+ ldr r6, =0x100000
+ wait_delay
+
+ ldr r6, [r0, #PM_INFO_DDRC_PHY_REG_NUM_OFFSET]
+ ldr r7, =PM_INFO_DDRC_PHY_REG_OFFSET
+ add r7, r7, r0
+
+10:
+ ldr r8, [r7], #0x4
+ ldr r9, [r7], #0x4
+ str r9, [r4, r8]
+ subs r6, r6, #0x1
+ bne 10b
+
+ ldr r7, =0x0
+ add r9, r10, #0x4000
+ str r7, [r9, #0x130]
+
+ cmp r5, #0x0
+ beq 101f
+ ldr r7, =0x170
+ orr r7, r7, #0x8
+ str r7, [r11, #0x20]
+
+101:
+ ldr r7, =0x2
+ add r9, r10, #0x4000
+ str r7, [r9, #0x130]
+
+ ldr r7, =0xf
+ str r7, [r4, #DDRPHY_LP_CON0]
+
+ /* wait until self-refresh mode entered */
+11:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ bne 11b
+ ldr r7, =0x0
+ str r7, [r3, #DDRC_SWCTL]
+ ldr r7, =0x1
+ str r7, [r3, #DDRC_DFIMISC]
+ ldr r7, =0x1
+ str r7, [r3, #DDRC_SWCTL]
+12:
+ ldr r7, [r3, #DDRC_SWSTAT]
+ and r7, r7, #0x1
+ cmp r7, #0x1
+ bne 12b
+13:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x20
+ cmp r7, #0x20
+ bne 13b
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r3, #DDRC_PWRCTL]
+14:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x30
+ cmp r7, #0x0
+ bne 14b
+
+15:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x1
+ bne 15b
+
+ /* enable port */
+ ldr r7, =0x1
+ str r7, [r3, #DDRC_PCTRL_0]
+
+ .endm
+
+ENTRY(imx7_suspend)
+ push {r4-r12}
+
+ /*
+ * The value of r0 is mapped the same in origin table and IRAM table,
+ * thus no need to care r0 here.
+ */
+ ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
+ ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+ ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
+ ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
+
+ /*
+ * counting the resume address in iram
+ * to set it in SRC register.
+ */
+ ldr r6, =imx7_suspend
+ ldr r7, =resume
+ sub r7, r7, r6
+ add r8, r1, r4
+ add r9, r8, r7
+
+ ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ /* store physical resume addr and pm_info address. */
+ str r9, [r11, #MX7_SRC_GPR1]
+ str r1, [r11, #MX7_SRC_GPR2]
+
+ disable_l1_dcache
+
+ /*
+ * make sure TLB contain the addr we want,
+ * as we will access them after DDR is in
+ * self-refresh mode.
+ */
+ ldr r6, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+ ldr r7, [r0, #0x0]
+ ldr r6, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
+ add r6, #0x4000
+ ldr r7, [r6]
+ ldr r6, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldr r7, [r6, #0x0]
+ ldr r6, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ ldr r7, [r6, #0x0]
+ add r6, #0x1000
+ ldr r7, [r6]
+ ldr r6, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ ldr r7, [r6, #0x0]
+ ldr r7, [r6, #0x490]
+ ldr r6, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
+ ldr r7, [r6, #0x0]
+
+ ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
+ ldr r7, [r11, #GPC_PGC_FM]
+ cmp r7, #0
+ beq ddr_only_self_refresh
+
+ ddr_enter_retention
+ b ddr_retention_enter_out
+ddr_only_self_refresh:
+ ddrc_enter_self_refresh
+ddr_retention_enter_out:
+
+ /* Zzz, enter stop mode */
+ wfi
+ nop
+ nop
+ nop
+ nop
+
+ mov r5, #0x0
+
+ ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
+ ldr r7, [r11, #GPC_PGC_FM]
+ cmp r7, #0
+ beq wfi_ddr_self_refresh_out
+
+ ddr_exit_retention
+ b wfi_ddr_retention_out
+wfi_ddr_self_refresh_out:
+ ddrc_exit_self_refresh
+wfi_ddr_retention_out:
+
+ ldr r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+ ldr r7, =0x170
+ orr r7, r7, #0x8
+ str r7, [r11, #0x20]
+
+ /* clear core0's entry and parameter */
+ ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ mov r7, #0x0
+ str r7, [r11, #MX7_SRC_GPR1]
+ str r7, [r11, #MX7_SRC_GPR2]
+
+ enable_l1_dcache
+
+ pop {r4-r12}
+ /* return to suspend finish */
+ mov pc, lr
+
+resume:
+ /* invalidate L1 I-cache first */
+ mov r6, #0x0
+ mcr p15, 0, r6, c7, c5, 0
+ mcr p15, 0, r6, c7, c5, 6
+ /* enable the Icache and branch prediction */
+ mov r6, #0x1800
+ mcr p15, 0, r6, c1, c0, 0
+ isb
+
+ /* get physical resume address from pm_info. */
+ ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+ /* clear core0's entry and parameter */
+ ldr r11, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
+ mov r7, #0x0
+ str r7, [r11, #MX7_SRC_GPR1]
+ str r7, [r11, #MX7_SRC_GPR2]
+
+ mov r5, #0x1
+
+ ldr r11, [r0, #PM_INFO_MX7_GPC_P_OFFSET]
+ ldr r7, [r11, #GPC_PGC_FM]
+ cmp r7, #0
+ beq dsm_ddr_self_refresh_out
+
+ ddr_exit_retention
+ b dsm_ddr_retention_out
+dsm_ddr_self_refresh_out:
+ ddrc_exit_self_refresh
+dsm_ddr_retention_out:
+
+ mov pc, lr
+ENDPROC(imx7_suspend)
+
+ENTRY(ca7_cpu_resume)
+ bl v7_invalidate_l1
+ b cpu_resume
+ENDPROC(ca7_cpu_resume)
--
2.5.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists