[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CABxcv==6R46AqkTBHPfHdWc8gJZigQdREieZMVkLY9AEvevtUw@mail.gmail.com>
Date: Thu, 23 Jul 2015 10:43:14 +0200
From: Javier Martinez Canillas <javier@...hile0.org>
To: Henry Chen <henryc.chen@...iatek.com>
Cc: Mark Brown <broonie@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Liam Girdwood <lgirdwood@...il.com>,
Linux Kernel <linux-kernel@...r.kernel.org>,
linux-mediatek@...ts.infradead.org,
Sascha Hauer <kernel@...gutronix.de>,
Matthias Brugger <matthias.bgg@...il.com>,
eddie.huang@...iatek.com,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3 1/2] dt-bindings: regulator: mt6311: Add document for
mt6311 regulator
Hello Henry,
On Thu, Jul 23, 2015 at 5:39 AM, Henry Chen <henryc.chen@...iatek.com> wrote:
> This patch adds a list of supported regulator names to the devicetree
> binding documentation for Mediatek MT6311 PMIC.
>
> Signed-off-by: Henry Chen <henryc.chen@...iatek.com>
> ---
> .../bindings/regulator/mt6311-regulator.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
>
> diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
> new file mode 100644
> index 0000000..9387d6d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
> @@ -0,0 +1,35 @@
> +Mediatek MT6311 Regulator Driver
> +
> +Required properties:
> +- compatible: "mediatek,mt6311-regulator"
> +- reg: I2C slave address, usually 0x6b.
> +- regulators: List of regulators provided by this controller. It is named
> + to VDVFS and VBIASN.
> + The definition for each of these nodes is defined using the standard binding
> + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
> +
> +The valid names for regulators are:
> +BUCK:
> + VDVFS
> +LDO:
> + VBIASN
> +
> +Example:
Sorry, I missed this in the previous revision but the ePAPR document
says "the name of a node should be somewhat generic, reflecting the
function of the device and not its precise programming model."
> + pmic: mt6311@6B {
So this should be:
mt6311: pmic@
> + compatible = "mediatek,mt6311-regulator";
> + reg = <0x6B>;
> +
> + regulators {
> + mt6311_vcpu_reg: VDVFS {
> + regulator-name = "VDVFS";
> + regulator-min-microvolt = < 600000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-ramp-delay = <10000>;
> + };
> + mt6311_ldo_reg: VBIASN {
> + regulator-name = "VBIASN";
> + regulator-min-microvolt = <200000>;
> + regulator-max-microvolt = <800000>;
> + };
> + };
> + };
> --
Besides the comment above, it looks good to me.
Reviewed-by: Javier Martinez Canillas <javier@....samsung.com>
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists