[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1437714359-2484-3-git-send-email-dudl@cypress.com>
Date: Fri, 24 Jul 2015 13:05:58 +0800
From: Dudley Du <dudl@...ress.com>
To: dmitry.torokhov@...il.com, mark.rutland@....com, robh+dt@...nel.org
Cc: Dudley Du <dudl@...ress.com>, bleung@...gle.com,
jmmahler@...il.com, devicetree@...r.kernel.org,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/3] input: cyapa: add of match device support and description document
Add of_match_device mechanism support for Cypress trackpad device, and
add the sample description document on how to adding the trackpad device node
in the device tree.
Signed-off-by: Dudley Du <dudl@...ress.com>
---
.../devicetree/bindings/input/cypress,cyapa.txt | 44 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/input/mouse/cyapa.c | 10 +++++
3 files changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/cypress,cyapa.txt
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
new file mode 100644
index 0000000..9be2b44
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
@@ -0,0 +1,44 @@
+Cypress I2C Touchpad
+
+Required properties:
+- compatible: must be "cypress,cyapa".
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+ binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+ binding[0]).
+
+Optional properties:
+- wakeup-source: touchpad can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+ pinctrl binding [1]).
+- vcc-supply: a phandle for the regulator supplying 3.3V power.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+ &i2c0 {
+ /* ... */
+
+ /* Cypress Gen3 touchpad */
+ touchpad@67 {
+ compatible = "cypress,cyapa";
+ reg = <0x24>;
+ interrupt-parent = <&gpio>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
+ wakeup-source;
+ };
+
+ /* Cypress Gen5 and later touchpad */
+ touchpad@24 {
+ compatible = "cypress,cyapa";
+ reg = <0x24>;
+ interrupt-parent = <&gpio>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
+ wakeup-source;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d444757..57c0f5f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -54,6 +54,7 @@ cortina Cortina Systems, Inc.
cosmic Cosmic Circuits
crystalfontz Crystalfontz America, Inc.
cubietech Cubietech, Ltd.
+cypress Cypress Semiconductor Corporation
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
delta Delta Electronics, Inc.
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index 2159c5e..3431510 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -25,6 +25,7 @@
#include <linux/uaccess.h>
#include <linux/pm_runtime.h>
#include <linux/acpi.h>
+#include <linux/of.h>
#include "cyapa.h"
@@ -1486,11 +1487,20 @@ static const struct acpi_device_id cyapa_acpi_id[] = {
MODULE_DEVICE_TABLE(acpi, cyapa_acpi_id);
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id cyapa_of_match[] = {
+ { .compatible = "cypress,cyapa" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cyapa_of_match);
+#endif
+
static struct i2c_driver cyapa_driver = {
.driver = {
.name = "cyapa",
.pm = &cyapa_pm_ops,
.acpi_match_table = ACPI_PTR(cyapa_acpi_id),
+ .of_match_table = of_match_ptr(cyapa_of_match),
},
.probe = cyapa_probe,
--
1.9.1
---------------------------------------------------------------
This message and any attachments may contain Cypress (or its
subsidiaries) confidential information. If it has been received
in error, please advise the sender and immediately delete this
message.
---------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists