| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1394712342-15778-153-Taiwan-albertk@realtek.com>
Date: Fri, 24 Jul 2015 13:54:23 +0800
From: Hayes Wang <hayeswang@...ltek.com>
To: <netdev@...r.kernel.org>
CC: <nic_swsd@...ltek.com>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>, Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net v2 1/3] r8152: fix the issue about U1/U2
- Disable U1/U2 during initialization.
- Disable lpm when linking is on, and enable it when linking is off.
- Disable U1/U2 when enabling runtime suspend.
It is possible to let hw stop working, if the U1/U2 request occurs
during some situations. The patch is used to avoid it.
Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
---
drivers/net/usb/r8152.c | 94 ++++++++++++++++++++++++++++---------------------
1 file changed, 54 insertions(+), 40 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 7f6419e..e3a0110 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2166,6 +2166,7 @@ static int rtl8153_enable(struct r8152 *tp)
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return -ENODEV;
+ usb_disable_lpm(tp->udev);
set_tx_qlen(tp);
rtl_set_eee_plus(tp);
r8153_set_rx_early_timeout(tp);
@@ -2337,11 +2338,54 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
device_set_wakeup_enable(&tp->udev->dev, false);
}
+static void r8153_u1u2en(struct r8152 *tp, bool enable)
+{
+ u8 u1u2[8];
+
+ if (enable)
+ memset(u1u2, 0xff, sizeof(u1u2));
+ else
+ memset(u1u2, 0x00, sizeof(u1u2));
+
+ usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
+}
+
+static void r8153_u2p3en(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
+ if (enable && tp->version != RTL_VER_03 && tp->version != RTL_VER_04)
+ ocp_data |= U2P3_ENABLE;
+ else
+ ocp_data &= ~U2P3_ENABLE;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
+}
+
+static void r8153_power_cut_en(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
+ if (enable)
+ ocp_data |= PWR_EN | PHASE2_EN;
+ else
+ ocp_data &= ~(PWR_EN | PHASE2_EN);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+ ocp_data &= ~PCUT_STATUS;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+}
+
static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
{
if (enable) {
u32 ocp_data;
+ r8153_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
+
__rtl_set_wol(tp, WAKE_ANY);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
@@ -2353,6 +2397,8 @@ static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
} else {
__rtl_set_wol(tp, tp->saved_wolopts);
+ r8153_u2p3en(tp, true);
+ r8153_u1u2en(tp, true);
}
}
@@ -2599,46 +2645,6 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
set_bit(PHY_RESET, &tp->flags);
}
-static void r8153_u1u2en(struct r8152 *tp, bool enable)
-{
- u8 u1u2[8];
-
- if (enable)
- memset(u1u2, 0xff, sizeof(u1u2));
- else
- memset(u1u2, 0x00, sizeof(u1u2));
-
- usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
-}
-
-static void r8153_u2p3en(struct r8152 *tp, bool enable)
-{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
- if (enable)
- ocp_data |= U2P3_ENABLE;
- else
- ocp_data &= ~U2P3_ENABLE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
-}
-
-static void r8153_power_cut_en(struct r8152 *tp, bool enable)
-{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
- if (enable)
- ocp_data |= PWR_EN | PHASE2_EN;
- else
- ocp_data &= ~(PWR_EN | PHASE2_EN);
- ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
- ocp_data &= ~PCUT_STATUS;
- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-}
-
static void r8153_first_init(struct r8152 *tp)
{
u32 ocp_data;
@@ -2781,6 +2787,7 @@ static void rtl8153_disable(struct r8152 *tp)
r8153_disable_aldps(tp);
rtl_disable(tp);
r8153_enable_aldps(tp);
+ usb_enable_lpm(tp->udev);
}
static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
@@ -2901,9 +2908,13 @@ static void rtl8153_up(struct r8152 *tp)
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return;
+ r8153_u1u2en(tp, false);
r8153_disable_aldps(tp);
r8153_first_init(tp);
r8153_enable_aldps(tp);
+ r8153_u2p3en(tp, true);
+ r8153_u1u2en(tp, true);
+ usb_enable_lpm(tp->udev);
}
static void rtl8153_down(struct r8152 *tp)
@@ -2914,6 +2925,7 @@ static void rtl8153_down(struct r8152 *tp)
}
r8153_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
r8153_power_cut_en(tp, false);
r8153_disable_aldps(tp);
r8153_enter_oob(tp);
@@ -3252,6 +3264,7 @@ static void r8153_init(struct r8152 *tp)
msleep(20);
}
+ usb_disable_lpm(tp->udev);
r8153_u2p3en(tp, false);
if (tp->version == RTL_VER_04) {
@@ -3319,6 +3332,7 @@ static void r8153_init(struct r8152 *tp)
r8153_enable_aldps(tp);
r8152b_enable_fc(tp);
rtl_tally_reset(tp);
+ r8153_u2p3en(tp, true);
}
static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
--
2.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists