[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <55B609CD.7010403@ti.com>
Date: Mon, 27 Jul 2015 13:37:01 +0300
From: Roger Quadros <rogerq@...com>
To: <kishon@...com>, <tony@...mide.com>
CC: <nm@...com>, <nsekhar@...com>, <balbi@...com>,
<grygorii.strashko@...com>, <t-kristo@...com>,
<linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 0/3] phy: ti-pipe3: dra7: sata: allow suspend to RAM
(core-retention)
On 27/07/15 13:21, Roger Quadros wrote:
> Kishon & Tony,
>
> You can please pick the first 2 patches for -next.
Sorry, I meant for -rc.
>
> The 3rd patch is not required for SATA and I will send it as
> a separate series.
This can go in -next.
cheers,
-roger
>
> cheers,
> -roger
>
> On 17/07/15 16:47, Roger Quadros wrote:
>> Hi,
>>
>> Implement workaround for SATA errata i783 (SATA Lockup After SATA DPLL Unlock/Relock)
>> so that we can now turn off sata_refclk to support suspend-to-ram without preventing
>> core-retention.
>>
>> Depends on http://article.gmane.org/gmane.linux.ports.arm.omap/126670.
>>
>> Changelog:
>> v3:
>> - used scm_conf node in dra7.dtsi for control register access.
>>
>> v2:
>> - Fixed pcie disable_clocks. Addressed review comments.
>>
>> cheers,
>> -roger
>>
>> Roger Quadros (3):
>> phy: ti-pipe3: i783 workaround for SATA lockup after dpll
>> unlock/relock
>> ARM: dts: dra7: Add syscon-pllreset syscon to SATA PHY
>> ARM: dts: dra7: Add scm_conf1 node and remove redundant nodes
>>
>> Documentation/devicetree/bindings/phy/ti-phy.txt | 16 +++++++
>> arch/arm/boot/dts/dra7.dtsi | 20 ++++----
>> drivers/phy/phy-ti-pipe3.c | 61 +++++++++++++++++++++---
>> 3 files changed, 80 insertions(+), 17 deletions(-)
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists