| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1438005755-27051-2-git-send-email-govindraj.raja@imgtec.com>
Date: Mon, 27 Jul 2015 15:02:34 +0100
From: Govindraj Raja <govindraj.raja@...tec.com>
To: <linux-kernel@...r.kernel.org>, <linux-mips@...ux-mips.org>,
"Daniel Lezcano" <daniel.lezcano@...aro.org>,
<devicetree@...r.kernel.org>
CC: Thomas Gleixner <tglx@...utronix.de>,
Andrew Bresticker <abrestic@...omium.org>,
James Hartley <James.Hartley@...tec.com>,
"Govindraj Raja" <Govindraj.Raja@...tec.com>,
Damien Horsley <Damien.Horsley@...tec.com>,
James Hogan <James.Hogan@...tec.com>,
Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Ezequiel Garcia <ezequiel.garcia@...tec.com>
Subject: [PATCH v4 6/7] clocksource: Add Pistachio clocksource-only driver
From: Ezequiel Garcia <ezequiel.garcia@...tec.com>
The Pistachio SoC provides four general purpose timers, and allow
to implement a clocksource driver.
This driver can be used as a replacement for the MIPS GIC and MIPS R4K
clocksources and sched clocks, which are clocked from the CPU clock.
Given the general purpose timers are clocked from an independent clock,
this new clocksource driver will be useful to introduce CPUFreq support
for Pistachio machines.
Signed-off-by: Govindraj Raja <Govindraj.Raja@...tec.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@...tec.com>
---
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/time-pistachio.c | 194 +++++++++++++++++++++++++++++++++++
3 files changed, 199 insertions(+)
create mode 100644 drivers/clocksource/time-pistachio.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 4e57730..74e002e 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -111,6 +111,10 @@ config CLKSRC_LPC32XX
select CLKSRC_MMIO
select CLKSRC_OF
+config CLKSRC_PISTACHIO
+ bool
+ select CLKSRC_OF
+
config CLKSRC_STM32
bool "Clocksource for STM32 SoCs" if !ARCH_STM32
depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f228354..066337e 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
+obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
diff --git a/drivers/clocksource/time-pistachio.c b/drivers/clocksource/time-pistachio.c
new file mode 100644
index 0000000..d461bd1
--- /dev/null
+++ b/drivers/clocksource/time-pistachio.c
@@ -0,0 +1,194 @@
+/*
+ * Pistachio clocksource based on general-purpose timers
+ *
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sched_clock.h>
+#include <linux/time.h>
+
+/* Top level reg */
+#define CR_TIMER_CTRL_CFG 0x00
+#define TIMER_ME_GLOBAL BIT(0)
+#define CR_TIMER_REV 0x10
+
+/* Timer specific registers */
+#define TIMER_CFG 0x20
+#define TIMER_ME_LOCAL BIT(0)
+#define TIMER_RELOAD_VALUE 0x24
+#define TIMER_CURRENT_VALUE 0x28
+#define TIMER_CURRENT_OVERFLOW_VALUE 0x2C
+#define TIMER_IRQ_STATUS 0x30
+#define TIMER_IRQ_CLEAR 0x34
+#define TIMER_IRQ_MASK 0x38
+
+#define PERIP_TIMER_CONTROL 0x90
+
+/* Timer specific configuration Values */
+#define RELOAD_VALUE 0xffffffff
+
+static void __iomem *timer_base;
+static DEFINE_RAW_SPINLOCK(lock);
+
+static inline u32 gpt_readl(u32 offset, u32 gpt_id)
+{
+ return readl(timer_base + 0x20 * gpt_id + offset);
+}
+
+static inline void gpt_writel(u32 value, u32 offset, u32 gpt_id)
+{
+ writel(value, timer_base + 0x20 * gpt_id + offset);
+}
+
+static cycle_t pistachio_clocksource_read_cycles(struct clocksource *cs)
+{
+ u32 counter, overflw;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&lock, flags);
+ overflw = gpt_readl(TIMER_CURRENT_OVERFLOW_VALUE, 0);
+ counter = gpt_readl(TIMER_CURRENT_VALUE, 0);
+ raw_spin_unlock_irqrestore(&lock, flags);
+
+ return ~(cycle_t)counter;
+}
+
+static u64 notrace pistachio_read_sched_clock(void)
+{
+ return pistachio_clocksource_read_cycles(NULL);
+}
+
+static void pistachio_clksrc_enable(int timeridx)
+{
+ u32 val;
+
+ /* Disable GPT local before loading reload value */
+ val = gpt_readl(TIMER_CFG, timeridx);
+ val &= ~TIMER_ME_LOCAL;
+ gpt_writel(val, TIMER_CFG, timeridx);
+
+ gpt_writel(RELOAD_VALUE, TIMER_RELOAD_VALUE, timeridx);
+
+ val = gpt_readl(TIMER_CFG, timeridx);
+ val |= TIMER_ME_LOCAL;
+ gpt_writel(val, TIMER_CFG, timeridx);
+}
+
+static void pistachio_clksrc_disable(int timeridx)
+{
+ u32 val;
+
+ /* Disable GPT local */
+ val = gpt_readl(TIMER_CFG, timeridx);
+ val &= ~TIMER_ME_LOCAL;
+ gpt_writel(val, TIMER_CFG, timeridx);
+}
+
+static int pistachio_clocksource_enable(struct clocksource *cs)
+{
+ pistachio_clksrc_enable(0);
+ return 0;
+}
+
+static void pistachio_clocksource_disable(struct clocksource *cs)
+{
+ pistachio_clksrc_disable(0);
+}
+
+/* Desirable clock source for pistachio platform */
+static struct clocksource pistachio_clocksource_gpt = {
+ .name = "gptimer",
+ .rating = 300,
+ .enable = pistachio_clocksource_enable,
+ .disable = pistachio_clocksource_disable,
+ .read = pistachio_clocksource_read_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS |
+ CLOCK_SOURCE_SUSPEND_NONSTOP,
+};
+
+static void __init pistachio_clksrc_of_init(struct device_node *node)
+{
+ struct clk *sys_clk, *fast_clk;
+ struct regmap *periph_regs;
+ unsigned long rate;
+ int ret;
+
+ timer_base = of_iomap(node, 0);
+ if (!timer_base) {
+ pr_err("cannot iomap\n");
+ return;
+ }
+
+ periph_regs = syscon_regmap_lookup_by_phandle(node, "img,cr-periph");
+ if (IS_ERR(periph_regs)) {
+ pr_err("cannot get peripheral regmap (%lu)\n",
+ PTR_ERR(periph_regs));
+ return;
+ }
+
+ /* Switch to using the fast counter clock */
+ ret = regmap_update_bits(periph_regs, PERIP_TIMER_CONTROL,
+ 0xf, 0x0);
+ if (ret)
+ return;
+
+ sys_clk = of_clk_get_by_name(node, "sys");
+ if (IS_ERR(sys_clk)) {
+ pr_err("clock get failed (%lu)\n", PTR_ERR(sys_clk));
+ return;
+ }
+
+ fast_clk = of_clk_get_by_name(node, "fast");
+ if (IS_ERR(fast_clk)) {
+ pr_err("clock get failed (%lu)\n", PTR_ERR(fast_clk));
+ return;
+ }
+
+ ret = clk_prepare_enable(sys_clk);
+ if (ret < 0) {
+ pr_err("failed to enable clock (%d)\n", ret);
+ return;
+ }
+
+ ret = clk_prepare_enable(fast_clk);
+ if (ret < 0) {
+ pr_err("failed to enable clock (%d)\n", ret);
+ clk_disable_unprepare(sys_clk);
+ return;
+ }
+
+ rate = clk_get_rate(fast_clk);
+
+ /* Disable irq's for clocksource usage */
+ gpt_writel(0, TIMER_IRQ_MASK, 0);
+ gpt_writel(0, TIMER_IRQ_MASK, 1);
+ gpt_writel(0, TIMER_IRQ_MASK, 2);
+ gpt_writel(0, TIMER_IRQ_MASK, 3);
+
+ /* Enable timer block */
+ writel(TIMER_ME_GLOBAL, timer_base);
+
+ sched_clock_register(pistachio_read_sched_clock, 32, rate);
+ clocksource_register_hz(&pistachio_clocksource_gpt, rate);
+}
+CLOCKSOURCE_OF_DECLARE(pistachio_gptimer, "img,pistachio-gptimer",
+ pistachio_clksrc_of_init);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists