| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1fb2b7a67ac2a7fb6390401eef529bd14eec8f43.1437972635.git.viresh.kumar@linaro.org>
Date: Mon, 27 Jul 2015 10:32:41 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: Rafael Wysocki <rjw@...ysocki.net>
Cc: linaro-kernel@...ts.linaro.org, linux-pm@...r.kernel.org,
rob.herring@...aro.org, arnd.bergmann@...aro.org, nm@...com,
broonie@...nel.org, mturquette@...libre.com, sboyd@...eaurora.org,
Sudeep.Holla@....com, viswanath.puttagunta@...aro.org,
l.stach@...gutronix.de, thomas.petazzoni@...e-electrons.com,
linux-arm-kernel@...ts.infradead.org, ta.omasab@...il.com,
kesavan.abhilash@...il.com, khilman@...aro.org,
santosh.shilimkar@...cle.com, b.zolnierkie@...sung.com,
Viresh Kumar <viresh.kumar@...aro.org>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH V2 11/11] cpufreq-dt: Add support for operating-points-v2 bindings
Support for parsing operating-points-v2 bindings is in place now, lets
modify cpufreq-dt driver to use them.
For backward compatibility we will continue to support earlier bindings.
Special handling for that is required, to make sure OPPs are initialized
for all the CPUs.
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
drivers/cpufreq/cpufreq-dt.c | 56 ++++++++++++++++++++++++++++++++++++--------
1 file changed, 46 insertions(+), 10 deletions(-)
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 528a82bf5038..c6e7033076de 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -184,7 +184,6 @@ static int allocate_resources(int cpu, struct device **cdev,
static int cpufreq_init(struct cpufreq_policy *policy)
{
- struct cpufreq_dt_platform_data *pd;
struct cpufreq_frequency_table *freq_table;
struct device_node *np;
struct private_data *priv;
@@ -193,6 +192,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
struct clk *cpu_clk;
unsigned long min_uV = ~0, max_uV = 0;
unsigned int transition_latency;
+ bool need_update = false;
int ret;
ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
@@ -208,8 +208,47 @@ static int cpufreq_init(struct cpufreq_policy *policy)
goto out_put_reg_clk;
}
- /* OPPs might be populated at runtime, don't check for error here */
- of_init_opp_table(cpu_dev);
+ /* Get OPP-sharing information from "operating-points-v2" bindings */
+ ret = of_get_cpus_sharing_opps(cpu_dev, policy->cpus);
+ if (ret) {
+ /*
+ * operating-points-v2 not supported, fallback to old method of
+ * finding shared-OPPs for backward compatibility.
+ */
+ if (ret == -ENOENT)
+ need_update = true;
+ else
+ goto out_node_put;
+ }
+
+ /*
+ * Initialize OPP tables for all policy->cpus. They will be shared by
+ * all CPUs which have marked their CPUs shared with OPP bindings.
+ *
+ * For platforms not using operating-points-v2 bindings, we do this
+ * before updating policy->cpus. Otherwise, we will end up creating
+ * duplicate OPPs for policy->cpus.
+ *
+ * OPPs might be populated at runtime, don't check for error here
+ */
+ of_cpumask_init_opp_table(policy->cpus);
+
+ if (need_update) {
+ struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
+
+ if (!pd || !pd->independent_clocks)
+ cpumask_setall(policy->cpus);
+
+ /*
+ * OPP tables are initialized only for policy->cpu, do it for
+ * others as well.
+ */
+ set_cpus_sharing_opps(cpu_dev, policy->cpus);
+
+ of_property_read_u32(np, "clock-latency", &transition_latency);
+ } else {
+ transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
+ }
/*
* But we need OPP table to function so if it is not there let's
@@ -230,7 +269,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
- if (of_property_read_u32(np, "clock-latency", &transition_latency))
+ if (!transition_latency)
transition_latency = CPUFREQ_ETERNAL;
if (!IS_ERR(cpu_reg)) {
@@ -293,10 +332,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
policy->cpuinfo.transition_latency = transition_latency;
- pd = cpufreq_get_driver_data();
- if (!pd || !pd->independent_clocks)
- cpumask_setall(policy->cpus);
-
of_node_put(np);
return 0;
@@ -306,7 +341,8 @@ static int cpufreq_init(struct cpufreq_policy *policy)
out_free_priv:
kfree(priv);
out_free_opp:
- of_free_opp_table(cpu_dev);
+ of_cpumask_free_opp_table(policy->cpus);
+out_node_put:
of_node_put(np);
out_put_reg_clk:
clk_put(cpu_clk);
@@ -322,7 +358,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
cpufreq_cooling_unregister(priv->cdev);
dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
- of_free_opp_table(priv->cpu_dev);
+ of_cpumask_free_opp_table(policy->related_cpus);
clk_put(policy->clk);
if (!IS_ERR(priv->cpu_reg))
regulator_put(priv->cpu_reg);
--
2.4.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists