| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <55B5BE46.3080703@monstr.eu>
Date: Mon, 27 Jul 2015 07:14:46 +0200
From: Michal Simek <monstr@...str.eu>
To: Moritz Fischer <moritz.fischer@...us.com>, p.zabel@...gutronix.de
Cc: mark.rutland@....com, devicetree@...r.kernel.org,
linux@....linux.org.uk, pawel.moll@....com,
ijc+devicetree@...lion.org.uk, michal.simek@...inx.com,
linux-kernel@...r.kernel.org, robh+dt@...nel.org,
linux-arm-kernel@...ts.infradead.org, galak@...eaurora.org,
soren.brinkmann@...inx.com
Subject: Re: [RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq
reset controller.
On 07/25/2015 02:21 AM, Moritz Fischer wrote:
> This adds a reset controller driver to control the Xilinx Zynq
> SoC's various resets.
>
> Signed-off-by: Moritz Fischer <moritz.fischer@...us.com>
> ---
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-zynq.c | 142 +++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 143 insertions(+)
> create mode 100644 drivers/reset/reset-zynq.c
>
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 157d421..3fe50e7 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
> obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
> obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
> obj-$(CONFIG_ARCH_STI) += sti/
> +obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
> diff --git a/drivers/reset/reset-zynq.c b/drivers/reset/reset-zynq.c
> new file mode 100644
> index 0000000..05e37f8
> --- /dev/null
> +++ b/drivers/reset/reset-zynq.c
> @@ -0,0 +1,142 @@
> +/*
> + * Copyright (c) 2015, National Instruments Corp.
> + *
> + * Xilinx Zynq Reset controller driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +
> +/* Offsets into SLCR regmap */
> +#define SLCR_RST_CTRL_OFFSET 0x200 /* FPGA Software Reset Control */
incorrect comment.
> +
> +#define NBANKS 18
> +
> +struct zynq_reset_data {
> + struct regmap *slcr;
> + struct reset_controller_dev rcdev;
> +};
> +
> +#define to_zynq_reset_data(p) \
> + container_of((p), struct zynq_reset_data, rcdev)
> +
> +static int zynq_reset_assert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct zynq_reset_data *priv = to_zynq_reset_data(rcdev);
> +
> + int bank = id / BITS_PER_LONG;
> + int offset = id % BITS_PER_LONG;
> +
> + regmap_update_bits(priv->slcr,
> + SLCR_RST_CTRL_OFFSET + (bank * 4),
> + BIT(offset),
> + BIT(offset));
> +
> + return 0;
> +}
> +
> +static int zynq_reset_deassert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct zynq_reset_data *priv = to_zynq_reset_data(rcdev);
> +
> + int bank = id / BITS_PER_LONG;
> + int offset = id % BITS_PER_LONG;
> +
> + regmap_update_bits(priv->slcr,
> + SLCR_RST_CTRL_OFFSET + (bank * 4),
> + BIT(offset),
> + ~BIT(offset));
> +
> + return 0;
> +}
> +
> +static int zynq_reset_status(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct zynq_reset_data *priv = to_zynq_reset_data(rcdev);
> +
> + int bank = id / BITS_PER_LONG;
> + int offset = id % BITS_PER_LONG;
> + u32 reg;
> +
> + regmap_read(priv->slcr, SLCR_RST_CTRL_OFFSET + (bank * 4), ®);
> +
> + return !(reg & BIT(offset));
> +}
> +
> +static const struct reset_control_ops zynq_reset_ops = {
> + .assert = zynq_reset_assert,
> + .deassert = zynq_reset_deassert,
> + .status = zynq_reset_status,
> +};
> +
> +static int zynq_reset_probe(struct platform_device *pdev)
> +{
> + struct zynq_reset_data *priv;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> + platform_set_drvdata(pdev, priv);
> +
> + priv->slcr = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> + "syscon");
NIT - incorrect indentation.
> + if (IS_ERR(priv->slcr)) {
> + dev_err(&pdev->dev, "unable to get zynq-slcr regmap");
> + return PTR_ERR(priv->slcr);
> + }
> +
> + priv->rcdev.owner = THIS_MODULE;
> + priv->rcdev.nr_resets = NBANKS * BITS_PER_LONG;
> + priv->rcdev.ops = &zynq_reset_ops;
> + priv->rcdev.of_node = pdev->dev.of_node;
> + reset_controller_register(&priv->rcdev);
> +
> + return 0;
> +}
> +
> +static int zynq_reset_remove(struct platform_device *pdev)
> +{
> + struct zynq_reset_data *priv = platform_get_drvdata(pdev);
> +
> + reset_controller_unregister(&priv->rcdev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id zynq_reset_dt_ids[] = {
> + { .compatible = "xlnx,zynq-reset", },
> + { /* sentinel */ },
> +};
> +
> +static struct platform_driver zynq_reset_driver = {
> + .probe = zynq_reset_probe,
> + .remove = zynq_reset_remove,
> + .driver = {
> + .name = "zynq-pl-reset",
PL in name.
BTW: Don't you want to use KBUILD_MODNAME here?
> + .of_match_table = zynq_reset_dt_ids,
> + },
> +};
> +module_platform_driver(zynq_reset_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Moritz Fischer <moritz.fischer@...us.com>");
> +MODULE_DESCRIPTION("Zynq Reset Controller Driver");
>
The rest looks good - will test it.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
Download attachment "signature.asc" of type "application/pgp-signature" (199 bytes)
Powered by blists - more mailing lists