| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAF6AEGvps12_faC5kU-bVueFgK=EErXNYumgA9Rs9zRpTjy+7w@mail.gmail.com>
Date: Tue, 28 Jul 2015 14:47:19 -0400
From: Rob Clark <robdclark@...il.com>
To: Andreas Färber <afaerber@...e.de>
Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Andy Gross <agross@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
Thierry Reding <thierry.reding@...il.com>
Subject: Re: [PATCH v1 7/7] ARM: dts: ifc6410: add inforce LVDS panel support
On Tue, Jul 28, 2015 at 1:50 PM, Andreas Färber <afaerber@...e.de> wrote:
> Am 28.07.2015 um 14:54 schrieb Srinivas Kandagatla:
>> This patch adds LVDS panel for IFC6410.
>>
>> Signed-off-by: Rob Clark <robdclark@...il.com>
>> [Rob Clark: WIP patch]
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>> ---
>> arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 66 ++++++++++++++++++++++++++++++
>> 1 file changed, 66 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
>> index 1ab71f1..3bdac02 100644
>> --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
>> +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
>> @@ -63,6 +63,12 @@
>> qcom,switch-mode-frequency = <3200000>;
>> };
>>
>> + pm8921_l2: l2 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + bias-pull-down;
>> + };
>> +
>> pm8921_l3: l3 {
>> regulator-min-microvolt = <3050000>;
>> regulator-max-microvolt = <3300000>;
>> @@ -96,6 +102,10 @@
>> pm8921_lvs1: lvs1 {
>> bias-pull-down;
>> };
>> +
>> + pm8921_lvs7: lvs7 {
>> + bias-pull-down;
>> + };
>> };
>> };
>>
>> @@ -119,6 +129,41 @@
>>
>> mdp: qcom,mdp@...0000 {
>> status = "okay";
>> + qcom,lvds-panel = <&panel>;
>
> In my testing this broke/uglified HDMI output. Since not everyone has
> that LVDS panel attached, or might have a different panel type, I don't
> think the panel node belongs in the generic -ifc6410.dts file.
> I suggest you add an -ifc6410+inforce-lvds.dts or so for that.
I think the problem is not so much the dt bindings, since we have an
i2c/ddc where we can probe the panel's edid and see if it is actually
attached.
Probably panel_simple_probe() should attempt to read edid (or at least
first block) if ddc is not null, and return an error if that times
out. That way we could tell at runtime whether the panel is there or
not.
BR,
-R
>> + lvds-vccs-3p3v-supply = <&ext_3p3v>;
>> + lvds-pll-vdda-supply = <&pm8921_l2>;
>> + lvds-vdda-supply = <&pm8921_lvs7>;
>> + };
>> +
>> + panel_3p3v: panel_3p3v {
>
> s/_/-/ ?
>
>> + compatible = "regulator-fixed";
>> + pinctrl-0 = <&disp_en_gpios>;
>> + pinctrl-names = "default";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-name = "panel_en_3p3v";
>> + regulator-type = "voltage";
>> + startup-delay-us = <0>;
>> + gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
>> + enable-active-high;
>> + regulator-boot-on;
>> + };
>> +
>> + backlight: backlight{
>> + pinctrl-0 = <&pwm_bl_gpios>;
>> + pinctrl-names = "default";
>> + compatible = "gpio-backlight";
>> + gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
>> + default-on;
>> + };
>> +
>> + panel: auo,b101xtn01 {
>
> panel: panel { ?
>
> Regards,
> Andreas
>
>> + status = "okay";
>> + compatible = "auo,b101xtn01";
>> +
>> + ddc-i2c-bus = <&i2c3>;
>> + backlight = <&backlight>;
>> + power-supply = <&panel_3p3v>;
>> };
>>
>> gsbi3: gsbi@...00000 {
>> @@ -235,6 +280,27 @@
>> pm8921_gpio: gpio@150 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&wlan_default_gpios>;
>> +
>> + pwm_bl_gpios: pwm-bl-gpios {
>> + pios {
>> + pins = "gpio26";
>> + bias-disable;
>> + function = "normal";
>> + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
>> + power-source = <PM8921_GPIO_S4>;
>> + };
>> + };
>> +
>> + disp_en_gpios: disp-en-gpios {
>> + pios {
>> + pins = "gpio36";
>> + bias-disable;
>> + function = "normal";
>> + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
>> + power-source = <PM8921_GPIO_S4>;
>> + };
>> + };
>> +
>> wlan_default_gpios: wlan-gpios {
>> pios {
>> pins = "gpio43";
>>
>
>
> --
> SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Felix Imendörffer, Jane Smithard, Dilip Upmanyu, Graham Norton; HRB
> 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists