linux-kernel - [PATCH v3 6/6] mmc: sdhci-esdhc-imx: set back the burst_length

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1438160637-28061-7-git-send-email-haibo.chen@freescale.com>
Date:	Wed, 29 Jul 2015 17:03:57 +0800
From:	Haibo Chen <haibo.chen@...escale.com>
To:	<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
	<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
	<shawnguo@...nel.org>, <kernel@...gutronix.de>,
	<linux@....linux.org.uk>, <ulf.hansson@...aro.org>,
	<aisheng.dong@...escale.com>
CC:	<johan.derycke@...co.com>, <haibo.chen@...escale.com>,
	<fabio.estevam@...escale.com>, <b29396@...escale.com>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <linux-mmc@...r.kernel.org>
Subject: [PATCH v3 6/6] mmc: sdhci-esdhc-imx: set back the burst_length_enable bit to 1

Currently we find that if a usdhc is choosed to boot system, then ROM
code will set the burst length enable bit of this usdhc as 0.

This will make performance drop a lot if this usdhc's burst length is
16. So this patch set back the burst_length_enable bit as 1, which is
the default value, and means burst length is enabled for INCR.

Signed-off-by: Haibo Chen <haibo.chen@...escale.com>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 37d0095..dd945e5 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -32,6 +32,7 @@
 #include "sdhci-esdhc.h"
 
 #define	ESDHC_CTRL_D3CD			0x08
+#define ESDHC_BURST_LEN_EN_INCR		(1 << 27)
 /* VENDOR SPEC register */
 #define ESDHC_VENDOR_SPEC		0xc0
 #define  ESDHC_VENDOR_SPEC_SDIO_QUIRK	(1 << 1)
@@ -1158,6 +1159,16 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
 		host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
+		/*
+		 * ROM code will change the burst_length_enable setting to
+		 * zero if this usdhc is choosed to boot system. Change it
+		 * back here, otherwise it will impact the performance a
+		 * lot if the burst length is 16.
+		 */
+		writel(readl(host->ioaddr + SDHCI_HOST_CONTROL)
+			| ESDHC_BURST_LEN_EN_INCR,
+			host->ioaddr + SDHCI_HOST_CONTROL);
+
 		if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200))
 			host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/