| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1438171844-24861-4-git-send-email-matt@codeblueprint.co.uk>
Date: Wed, 29 Jul 2015 13:10:44 +0100
From: Matt Fleming <matt@...eblueprint.co.uk>
To: Wim Van Sebroeck <wim@...ana.be>
Cc: linux-kernel@...r.kernel.org, linux-watchdog@...r.kernel.org,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Jean Delvare <jdelvare@...e.com>,
Wolfram Sang <wsa@...-dreams.de>,
Matt Fleming <matt.fleming@...el.com>,
Guenter Roeck <linux@...ck-us.net>
Subject: [PATCH v2 3/3] iTCO_wdt: Add support for TCO on Intel Sunrisepoint
From: Matt Fleming <matt.fleming@...el.com>
The revision of the watchdog hardware in Sunrisepoint necessitates a new
"version" inside the TCO watchdog driver because some of the register
layouts have changed.
Also update the Kconfig entry to select both the LPC and SMBus drivers
since the TCO device is on the SMBus in Sunrisepoint.
Cc: Wim Van Sebroeck <wim@...ana.be>
Cc: Guenter Roeck <linux@...ck-us.net>
Cc: Jean Delvare <jdelvare@...e.com>
Signed-off-by: Matt Fleming <matt.fleming@...el.com>
---
v2:
- Explicitly list TCO versions and their "no reboot" bits in the switch
statement in no_reboot_bit()
- Use a switch/case statement when clearing status bits instead of
convoluted if/else branching
- Select both of the bus drivers instead of using depends
drivers/watchdog/Kconfig | 3 ++-
drivers/watchdog/iTCO_wdt.c | 66 ++++++++++++++++++++++++++++-----------------
2 files changed, 43 insertions(+), 26 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 241fafde42cb..55c4b5b0a317 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -797,7 +797,8 @@ config ITCO_WDT
tristate "Intel TCO Timer/Watchdog"
depends on (X86 || IA64) && PCI
select WATCHDOG_CORE
- select LPC_ICH
+ select LPC_ICH if !EXPERT
+ select I2C_I801 if !EXPERT
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index a94401b2deca..7b8949d48029 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -145,58 +145,67 @@ static inline unsigned int ticks_to_seconds(int ticks)
return iTCO_wdt_private.iTCO_version == 3 ? ticks : (ticks * 6) / 10;
}
+static inline u32 no_reboot_bit(void)
+{
+ u32 enable_bit;
+
+ switch (iTCO_wdt_private.iTCO_version) {
+ case 3:
+ enable_bit = 0x00000010;
+ break;
+ case 2:
+ enable_bit = 0x00000020;
+ break;
+ case 4:
+ case 1:
+ default:
+ enable_bit = 0x00000002;
+ break;
+ }
+
+ return enable_bit;
+}
+
static void iTCO_wdt_set_NO_REBOOT_bit(void)
{
u32 val32;
/* Set the NO_REBOOT bit: this disables reboots */
- if (iTCO_wdt_private.iTCO_version == 3) {
- val32 = readl(iTCO_wdt_private.gcs_pmc);
- val32 |= 0x00000010;
- writel(val32, iTCO_wdt_private.gcs_pmc);
- } else if (iTCO_wdt_private.iTCO_version == 2) {
+ if (iTCO_wdt_private.iTCO_version >= 2) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
- val32 |= 0x00000020;
+ val32 |= no_reboot_bit();
writel(val32, iTCO_wdt_private.gcs_pmc);
} else if (iTCO_wdt_private.iTCO_version == 1) {
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
- val32 |= 0x00000002;
+ val32 |= no_reboot_bit();
pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
}
}
static int iTCO_wdt_unset_NO_REBOOT_bit(void)
{
+ u32 enable_bit = no_reboot_bit();
int ret = 0;
- u32 val32;
+ u32 val32 = 0;
/* Unset the NO_REBOOT bit: this enables reboots */
- if (iTCO_wdt_private.iTCO_version == 3) {
- val32 = readl(iTCO_wdt_private.gcs_pmc);
- val32 &= 0xffffffef;
- writel(val32, iTCO_wdt_private.gcs_pmc);
-
- val32 = readl(iTCO_wdt_private.gcs_pmc);
- if (val32 & 0x00000010)
- ret = -EIO;
- } else if (iTCO_wdt_private.iTCO_version == 2) {
+ if (iTCO_wdt_private.iTCO_version >= 2) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
- val32 &= 0xffffffdf;
+ val32 &= ~enable_bit;
writel(val32, iTCO_wdt_private.gcs_pmc);
val32 = readl(iTCO_wdt_private.gcs_pmc);
- if (val32 & 0x00000020)
- ret = -EIO;
} else if (iTCO_wdt_private.iTCO_version == 1) {
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
- val32 &= 0xfffffffd;
+ val32 &= ~enable_bit;
pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
- if (val32 & 0x00000002)
- ret = -EIO;
}
+ if (val32 & enable_bit)
+ ret = -EIO;
+
return ret; /* returns: 0 = OK, -EIO = Error */
}
@@ -503,12 +512,19 @@ static int iTCO_wdt_probe(struct platform_device *dev)
pdata->name, pdata->version, (u64)TCOBASE);
/* Clear out the (probably old) status */
- if (iTCO_wdt_private.iTCO_version == 3) {
+ switch (iTCO_wdt_private.iTCO_version) {
+ case 4:
+ outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */
+ outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */
+ break;
+ case 3:
outl(0x20008, TCO1_STS);
- } else {
+ break;
+ default:
outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */
outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */
outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */
+ break;
}
iTCO_wdt_watchdog_dev.bootstatus = 0;
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists