lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150729153226.GB9319@x1>
Date:	Wed, 29 Jul 2015 16:32:26 +0100
From:	Lee Jones <lee.jones@...aro.org>
To:	Aaron Sierra <asierra@...-inc.com>
Cc:	Matt Fleming <matt@...eblueprint.co.uk>,
	Wim Van Sebroeck <wim@...ana.be>,
	linux-kernel@...r.kernel.org, linux-watchdog@...r.kernel.org,
	Mika Westerberg <mika.westerberg@...ux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
	Jean Delvare <jdelvare@...e.com>,
	Wolfram Sang <wsa@...-dreams.de>,
	Matt Fleming <matt.fleming@...el.com>,
	Peter Tyser <ptyser@...-inc.com>,
	Samuel Ortiz <sameo@...ux.intel.com>
Subject: Re: [PATCH 1/5] iTCO_wdt: Expose watchdog properties using platform
 data

On Wed, 29 Jul 2015, Aaron Sierra wrote:

> > From: "Lee Jones" <lee.jones@...aro.org>
> > Sent: Wednesday, July 29, 2015 2:38:41 AM
> > 
> > On Tue, 28 Jul 2015, Aaron Sierra wrote:
> > 
> > > > > > > @@ -933,7 +956,7 @@ gpe0_done:
> > > > > > >  	lpc_chipset_info[priv->chipset].use_gpio = ret;
> > > > > > >  	lpc_ich_enable_gpio_space(dev);
> > > > > > >  
> > > > > > > -	lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_GPIO]);
> > > > > > > +	lpc_ich_finalize_gpio_cell(dev);
> > > > > > >  	ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
> > > > > > >  			      &lpc_ich_cells[LPC_GPIO], 1, NULL, 0, NULL);
> > > > > > >  
> > > > > > > @@ -1007,7 +1030,10 @@ static int lpc_ich_init_wdt(struct pci_dev
> > > > > > > *dev)
> > > > > > >  		res->end = base_addr + ACPIBASE_PMC_END;
> > > > > > >  	}
> > > > > > >  
> > > > > > > -	lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]);
> > > > > > > +	ret = lpc_ich_finalize_wdt_cell(dev);
> > > > > > > +	if (ret)
> > > > > > > +		goto wdt_done;
> > > > > > > +
> > > > > > >  	ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
> > > > > > >  			      &lpc_ich_cells[LPC_WDT], 1, NULL, 0, NULL);
> > > > > > 
> > > > > > Why do you have an mfd_add_devices() call for each device?
> > > > >  
> > > > > Good question. This call has been present since March 2012 when support
> > > > > was first added for iTCO_wdt in commit 887c8ec7219f ("watchdog: Convert
> > > > > iTCO_wdt driver to mfd model").
> > > > > 
> > > > > There's no good reason that I can see. Aaron?
> > > 
> > > I chose to call mfd_add_devices() in each device init function
> > > because I thought it was the easiest way to avoid registering an
> > > incomplete/invalid MFD cell should an error occur during init.
> > > 
> > > That way device registration wouldn't be an all-or-nothing affair.
> > > 
> > > Doesn't mfd_add_devices() bail out after the first unsuccessful
> > > mfd to platform device translation?
> > 
> > Right, as it should.
> > 
> > Under what circumstance would an error occur and you'd wish to carry
> > on registering devices?
> 
> Lee,
> 
> The two devices that this driver is responsible for are conceptually
> independent; they simply are lumped together in one PCI device. No
> failure while preparing resources for the watchdog device should
> prevent the GPIO device from being registered.

This makes me think that perhaps this isn't an MFD at all then?

Perhaps I should invest some time to looking into that.

> The most common real world circumstance that I experience is when a
> BIOS reserves resources associated with the GPIO device, thus
> preventing the GPIO resources (ICH_RES_GPE0 and/or ICH_RES_GPIO) from
> being fully prepared.
> 
> I have not experienced issues with the watchdog device, but a similar
> issue would exist if the RCBA were disabled in a "v2" device.
> 
> It seems like a dangerous change to simply attempt to register both
> of these devices with a single call, when one or both of them could
> be incomplete.
> 
> Perhaps your real issue with this driver structure is that these
> cells are elements of a single lpc_ich_cells array for no clear
> reason. If each had a dedicated mfd_cell variable, would that be
> more acceptable to you?
> 
> -static struct mfd_cell lpc_ich_cells[] = {
> +static struct mfd_cell lpc_ich_wdt_cell = {
> ...
> +static struct mfd_cell lpc_ich_gpio_cell = {
> 
> That would eliminate the need for the lpc_cells enum, too.

Yes, that would make more sense.  Also consider using mfd_add_device()
instead of mfd_add_devices(), as you are only attempting registration
for a single device.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ