| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1438205243-14722-1-git-send-email-labbott@fedoraproject.org>
Date: Wed, 29 Jul 2015 14:27:23 -0700
From: Laura Abbott <labbott@...oraproject.org>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: Laura Abbott <labbott@...oraproject.org>,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org
Subject: [PATCH] Input: xpad - Fix double URB submission races
The xpad driver has several races with respect to URB submission which
make it easy to end up with submission while active:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 3563 at drivers/usb/core/urb.c:339
usb_submit_urb+0x2ad/0x5a0()
URB ffff8804078ac240 submitted while active
Modules linked in: fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun
nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter ip6t_REJECT
nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge ebtable_filter
ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables
iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack
iptable_mangle iptable_security iptable_raw bnep xpadsnd_hda_codec_realtek
snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel snd_hda_codec
snd_hda_core snd_hwdep snd_seq intel_rapl iosf_mbi snd_seq_device
x86_pkg_temp_thermal coretemp snd_pcm kvm uvcvideo iTCO_wdt iTCO_vendor_support
iwlwifi videobuf2_vmalloc videobuf2_core videobuf2_memops
v4l2_common btusb videodev btrtl btbcm thinkpad_acpi snd_timer btintel
mei_me rtsx_pci_ms cfg80211 bluetooth pcspkr mei media memstick joydev snd
tpm_tis shpchp ie31200_edac i2c_i801 tpm lpc_ich edac_core nfsd rfkill wmi
soundcore auth_rpcgss nfs_acl lockd grace sunrpc binfmt_misc dm_crypt i915 8021q
garp stp llc mrp i2c_algo_bit drm_kms_helper drm rtsx_pci_sdmmc mmc_core e1000e
crct10dif_pclmul crc32_pclmul crc32c_intel rtsx_pci ghash_clmulni_intel
ptp serio_raw pps_core mfd_core video
CPU: 3 PID: 3563 Comm: led_test.sh Not tainted 4.2.0-rc4-xpad+ #14
Hardware name: LENOVO 20BFS0EC00/20BFS0EC00, BIOS GMET62WW (2.10 )
03/19/2014
0000000000000000 0000000017a45bc6 ffff8800c9a0fbd8 ffffffff81758a11
0000000000000000 ffff8800c9a0fc30 ffff8800c9a0fc18 ffffffff8109b656
0000000000000002 ffff8804078ac240 00000000000000d0 ffff8800c9806d60
Call Trace:
[<ffffffff81758a11>] dump_stack+0x45/0x57
[<ffffffff8109b656>] warn_slowpath_common+0x86/0xc0
[<ffffffff8109b6e5>] warn_slowpath_fmt+0x55/0x70
[<ffffffff8120f218>] ? do_truncate+0x88/0xc0
[<ffffffff815427fd>] usb_submit_urb+0x2ad/0x5a0
[<ffffffff81230df4>] ? mntput+0x24/0x40
[<ffffffff8121b667>] ? terminate_walk+0xc7/0xe0
[<ffffffffa0430877>] xpad_send_led_command+0xc7/0x110 [xpad]
[<ffffffffa04308d5>] xpad_led_set+0x15/0x20 [xpad]
[<ffffffff815f9678>] led_set_brightness+0x88/0xc0
[<ffffffff815f9b0e>] brightness_store+0x7e/0xc0
[<ffffffff814b7478>] dev_attr_store+0x18/0x30
[<ffffffff8128bba7>] sysfs_kf_write+0x37/0x40
[<ffffffff8128b15d>] kernfs_fop_write+0x11d/0x170
[<ffffffff81210d17>] __vfs_write+0x37/0x100
[<ffffffff81213b28>] ? __sb_start_write+0x58/0x110
[<ffffffff813124dd>] ? security_file_permission+0x3d/0xc0
[<ffffffff81211696>] vfs_write+0xa6/0x1a0
[<ffffffff8120e93a>] ? filp_close+0x5a/0x80
[<ffffffff81212385>] SyS_write+0x55/0xc0
[<ffffffff8175f0ae>] entry_SYSCALL_64_fastpath+0x12/0x71
---[ end trace f573b768c94a66d6 ]---
This is easily reproducible with
while true; do
for i in $(seq 0 5); do
echo $i > /sys/class/leds/xpad0/subsystem/xpad0/brightness
done
done
xpad_send_led_command attempts to protect against races by locking
around usb_submit_urb. This is not sufficent since usb_submit_urb
is asynchronous; the urb is considered to be in use until the callback
(xpad_irq_out) returns appropriately. Additionally, there is no
protection at all in xpad_play_effect which uses the same urb. Fix this
by adding a flag to indicate when the urb submission is in progress.
The flag is cleared in the xpad_irq_out callback.
Signed-off-by: Laura Abbott <labbott@...oraproject.org>
---
drivers/input/joystick/xpad.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index f8850f9..f15d037 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -100,6 +100,8 @@
#define XTYPE_XBOXONE 3
#define XTYPE_UNKNOWN 4
+#define OUT_IRQ_SUBMITTED 0
+
static bool dpad_to_buttons;
module_param(dpad_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
@@ -334,7 +336,7 @@ struct usb_xpad {
struct urb *irq_out; /* urb for interrupt out report */
unsigned char *odata; /* output data */
dma_addr_t odata_dma;
- struct mutex odata_mutex;
+ unsigned long odata_flags;
#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
struct xpad_led *led;
@@ -707,6 +709,7 @@ static void xpad_irq_out(struct urb *urb)
switch (status) {
case 0:
/* success */
+ clear_bit(OUT_IRQ_SUBMITTED, &xpad->odata_flags);
return;
case -ECONNRESET:
@@ -725,9 +728,11 @@ static void xpad_irq_out(struct urb *urb)
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval)
+ if (retval) {
+ clear_bit(OUT_IRQ_SUBMITTED, &xpad->odata_flags);
dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
__func__, retval);
+ }
}
static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
@@ -746,7 +751,7 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
goto fail1;
}
- mutex_init(&xpad->odata_mutex);
+ xpad->odata_flags = 0;
xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_out) {
@@ -791,6 +796,9 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
{
struct usb_xpad *xpad = input_get_drvdata(dev);
+ if (test_and_set_bit(OUT_IRQ_SUBMITTED, &xpad->odata_flags))
+ return 0;
+
if (effect->type == FF_RUMBLE) {
__u16 strong = effect->u.rumble.strong_magnitude;
__u16 weak = effect->u.rumble.weak_magnitude;
@@ -912,7 +920,8 @@ static void xpad_send_led_command(struct usb_xpad *xpad, int command)
{
command %= 16;
- mutex_lock(&xpad->odata_mutex);
+ if (test_and_set_bit(OUT_IRQ_SUBMITTED, &xpad->odata_flags))
+ return;
switch (xpad->xtype) {
case XTYPE_XBOX360:
@@ -939,7 +948,6 @@ static void xpad_send_led_command(struct usb_xpad *xpad, int command)
}
usb_submit_urb(xpad->irq_out, GFP_KERNEL);
- mutex_unlock(&xpad->odata_mutex);
}
static void xpad_identify_controller(struct usb_xpad *xpad)
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists