linux-kernel - [PATCH 02/11] mmc: host: omap_hsmmc: separate setting voltage capabilities from bus power

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1438242394-25599-3-git-send-email-kishon@ti.com>
Date:	Thu, 30 Jul 2015 13:16:25 +0530
From:	Kishon Vijay Abraham I <kishon@...com>
To:	<tony@...mide.com>, <ulf.hansson@...aro.org>, <afenkart@...il.com>,
	<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <linux-mmc@...r.kernel.org>
CC:	<nsekhar@...com>, <kishon@...com>, <mugunthanvnm@...com>
Subject: [PATCH 02/11] mmc: host: omap_hsmmc: separate setting voltage capabilities from bus power

Added a separate function to set the voltage capabilities of the host
controller. Voltage capabilities should be set only once during
controller initialization but bus power can be changed every time there
is a voltage switch and whenever a different card is inserted.
This allows omap_hsmmc_conf_bus_power to be invoked every time there
is a voltage switch.

Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 drivers/mmc/host/omap_hsmmc.c |   28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 09e949f..2dfef11 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1812,25 +1812,34 @@ err:
 	return ret;
 }
 
+static void omap_hsmmc_set_capabilities(struct omap_hsmmc_host *host)
+{
+	u32 val;
+
+	val = OMAP_HSMMC_READ(host->base, CAPA);
+
+	/* Only MMC1 supports 3.0V */
+	if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT)
+		val |= (VS30 | VS18);
+	else
+		val |= VS18;
+
+	OMAP_HSMMC_WRITE(host->base, CAPA, val);
+}
+
 static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
 {
-	u32 hctl, capa, value;
+	u32 hctl, value;
 
 	/* Only MMC1 supports 3.0V */
-	if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
+	if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT)
 		hctl = SDVS30;
-		capa = VS30 | VS18;
-	} else {
+	else
 		hctl = SDVS18;
-		capa = VS18;
-	}
 
 	value = OMAP_HSMMC_READ(host->base, HCTL) & ~SDVS_MASK;
 	OMAP_HSMMC_WRITE(host->base, HCTL, value | hctl);
 
-	value = OMAP_HSMMC_READ(host->base, CAPA);
-	OMAP_HSMMC_WRITE(host->base, CAPA, value | capa);
-
 	/* Set SD bus power bit */
 	set_sd_bus_power(host);
 }
@@ -2133,6 +2142,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	mmc->pm_caps |= mmc_pdata(host)->pm_caps;
 
+	omap_hsmmc_set_capabilities(host);
 	omap_hsmmc_conf_bus_power(host);
 
 	if (!pdev->dev.of_node) {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/