[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150730092341.GC14642@x1>
Date: Thu, 30 Jul 2015 10:23:41 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
kernel@...inux.com, mturquette@...aro.org, sboyd@...eaurora.org,
devicetree@...r.kernel.org, geert@...ux-m68k.org,
s.hauer@...gutronix.de
Subject: Re: [PATCH v7 5/5] clk: dt: Introduce binding for critical clock
support
On Tue, 28 Jul 2015, Maxime Ripard wrote:
> On Mon, Jul 27, 2015 at 08:31:49AM +0100, Lee Jones wrote:
> > On Mon, 27 Jul 2015, Maxime Ripard wrote:
> >
> > > Hi Lee,
> > >
> > > On Wed, Jul 22, 2015 at 02:04:15PM +0100, Lee Jones wrote:
> > > > Signed-off-by: Lee Jones <lee.jones@...aro.org>
> > > > ---
> > > > .../devicetree/bindings/clock/clock-bindings.txt | 39 ++++++++++++++++++++++
> > > > 1 file changed, 39 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
> > > > index 06fc6d5..4137034 100644
> > > > --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
> > > > +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
> > > > @@ -44,6 +44,45 @@ For example:
> > > > clocks by index. The names should reflect the clock output signal
> > > > names for the device.
> > > >
> > > > +critical-clock: Some hardware contains bunches of clocks which, in normal
> > > > + circumstances, must never be turned off. If drivers a) fail to
> > > > + obtain a reference to any of these or b) give up a previously
> > > > + obtained reference during suspend, it is possible that some
> > > > + Operating Systems might attempt to disable them to save power.
> > > > + If this happens a platform can fail irrecoverably as a result.
> > > > + Usually the only way to recover from these failures is to
> > > > + reboot.
> > > > +
> > > > + To avoid either of these two scenarios from catastrophically
> > > > + disabling an otherwise perfectly healthy running system,
> > > > + clocks can be identified as 'critical' using this property from
> > > > + inside a clocksource's node.
> > > > +
> > > > + This property is not to be abused. It is only to be used to
> > > > + protect platforms from being crippled by gated clocks, NOT as a
> > > > + convenience function to avoid using the framework correctly
> > > > + inside device drivers.
> > > > +
> > > > + Expected values are hardware clock indices. If the
> > > > + clock-indices property (see below) is used, then supplied
> > > > + values must correspond to one of the listed identifiers.
> > > > + Using the clock-indices example below, hardware clock <2>
> > > > + is missing, therefore it is considered invalid to then
> > > > + list clock <2> as a critical clock.
> > >
> > > I think we should also consider having it simply as a boolean. Using
> > > indices for clocks that don't have any (for example because it only
> > > provides a single clock) seem to not really make much sense.
> >
> > Then how would you distinguish between the clocks if the provider
> > provides more than a single clock?
>
> What I had in mind was that, you would have three cases:
>
> - critical-clocks is not there: no clocks are made critical
>
> - critical-clocks is there, but doesn't have any values: all the
> clocks provided are marked critical
>
> - critical-clocks is there and it has a list of values: only the
> clocks listed are marked critical.
>
> Does that make sense to you?
Yep, sounds good.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists