linux-kernel - [PATCH 4/5] rtc: at91sam9: get sclk rate after enabling it

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1438215872-27794-4-git-send-email-alexandre.belloni@free-electrons.com>
Date:	Thu, 30 Jul 2015 02:24:31 +0200
From:	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To:	Nicolas Ferre <nicolas.ferre@...el.com>
Cc:	Boris Brezillon <boris.brezillon@...e-electrons.com>,
	linux-arm-kernel@...ts.infradead.org, rtc-linux@...glegroups.com,
	Alessandro Zummo <a.zummo@...ertech.it>,
	linux-kernel@...r.kernel.org,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCH 4/5] rtc: at91sam9: get sclk rate after enabling it

See help for clk_get_rate(): "obtain the current clock rate (in Hz) for a
clock source. This is only valid once the clock source has been enabled."

It currently returns the correct value but that may not stay that way.

Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
 drivers/rtc/rtc-at91sam9.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 23f721d049b2..f9e85ace5e71 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -425,18 +425,19 @@ static int at91_rtc_probe(struct platform_device *pdev)
 	if (IS_ERR(rtc->sclk))
 		return PTR_ERR(rtc->sclk);
 
-	sclk_rate = clk_get_rate(rtc->sclk);
-	if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
-		dev_err(&pdev->dev, "Invalid slow clock rate\n");
-		return -EINVAL;
-	}
-
 	ret = clk_prepare_enable(rtc->sclk);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not enable slow clock\n");
 		return ret;
 	}
 
+	sclk_rate = clk_get_rate(rtc->sclk);
+	if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
+		dev_err(&pdev->dev, "Invalid slow clock rate\n");
+		ret = -EINVAL;
+		goto err_clk;
+	}
+
 	mr = rtt_readl(rtc, MR);
 
 	/* unless RTT is counting at 1 Hz, re-initialize it */
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/