| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1F3AC3675D538145B1661F571FE1805F2F0AC0D3@irsmsx105.ger.corp.intel.com> Date: Thu, 30 Jul 2015 11:27:31 +0000 From: "Tirdea, Irina" <irina.tirdea@...el.com> To: Bastien Nocera <hadess@...ess.net>, "linux-input@...r.kernel.org" <linux-input@...r.kernel.org> CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>, Ian Campbell <ijc+devicetree@...lion.org.uk>, Kumar Gala <galak@...eaurora.org>, "Purdila, Octavian" <octavian.purdila@...el.com>, Dmitry Torokhov <dmitry.torokhov@...il.com>, Mark Rutland <mark.rutland@....com>, "devicetree@...r.kernel.org" <devicetree@...r.kernel.org> Subject: RE: [PATCH v3 1/5] Input: goodix - reset device at init > -----Original Message----- > From: Bastien Nocera [mailto:hadess@...ess.net] > Sent: 30 June, 2015 18:57 > To: Tirdea, Irina; Dmitry Torokhov; Mark Rutland; linux-input@...r.kernel.org; devicetree@...r.kernel.org > Cc: linux-kernel@...r.kernel.org; Rob Herring; Pawel Moll; Ian Campbell; Kumar Gala; Purdila, Octavian > Subject: Re: [PATCH v3 1/5] Input: goodix - reset device at init > > On Mon, 2015-06-29 at 19:28 +0300, Irina Tirdea wrote: > > After power on, it is recommended that the driver resets the device. > > The reset procedure timing is described in the datasheet and is used > > at device init (before writing device configuration) and > > for power management. It is a sequence of setting the interrupt > > and reset pins high/low at specific timing intervals. This procedure > > also includes setting the slave address to the one specified in the > > ACPI/device tree. > > > > This is based on Goodix datasheets for GT911 and GT9271 and on Goodix > > driver gt9xx.c for Android (publicly available in Android kernel > > trees for various devices). > > > > For reset the driver needs to control the interrupt and > > reset gpio pins (configured through ACPI/device tree). For devices > > that do not have the gpio pins declared, the functionality depending > > on these pins will not be available, but the device can still be used > > with basic functionality. > > > I'm having a little trouble with this first patch, on a 4.2 "pre" Linus > tree and on a 4.1 kernel. > > [ 6.720214] ------------[ cut here ]------------ > [ 6.720230] WARNING: CPU: 2 PID: 475 at drivers/pinctrl/intel/pinctrl-baytrail.c:338 byt_gpio_direction_output+0x97/0xa0() > [ 6.720234] Potential Error: Setting GPIO with direct_irq_en to output > [ 6.720238] Modules linked in: > [ 6.720241] regmap_i2c intel_soc_dts_iosf int340x_thermal_zone soundcore industrialio battery iosf_mbi acpi_thermal_rel > dell_smo8800 snd_soc_sst_acpi goodix_backport(OE+) i2c_hid acpi_pad ac rfkill_gpio i2c_designware_platform rfkill > pwm_lpss_platform pwm_lpss i2c_designware_core nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915 mmc_block i2c_algo_bit > drm_kms_helper drm video sdhci_acpi sdhci mmc_core > [ 6.720292] CPU: 2 PID: 475 Comm: systemd-udevd Tainted: G W OE 4.2.0-0.rc0.git2.2.fc22.i686 #1 > [ 6.720295] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/25/2014 > [ 6.720299] c0d39967 11197204 00000000 f6d37bc8 c0a9ce3c f6d37c08 f6d37bf8 c045c677 > [ 6.720311] c0cb62a4 f6d37c28 000001db c0cb62e0 00000152 c073bfc7 c073bfc7 f7c580b8 > [ 6.720321] f441409c f7c580b0 f6d37c14 c045c6ee 00000009 f6d37c08 c0cb62a4 f6d37c28 > [ 6.720331] Call Trace: > [ 6.720342] [<c0a9ce3c>] dump_stack+0x41/0x52 > [ 6.720349] [<c045c677>] warn_slowpath_common+0x87/0xc0 > [ 6.720355] [<c073bfc7>] ? byt_gpio_direction_output+0x97/0xa0 > [ 6.720360] [<c073bfc7>] ? byt_gpio_direction_output+0x97/0xa0 > [ 6.720365] [<c045c6ee>] warn_slowpath_fmt+0x3e/0x60 > [ 6.720370] [<c073bfc7>] byt_gpio_direction_output+0x97/0xa0 > [ 6.720376] [<c073bf30>] ? byt_gpio_irq_handler+0xc0/0xc0 > [ 6.720382] [<c073e939>] _gpiod_direction_output_raw+0x59/0x1c0 > [ 6.720388] [<c0aa202d>] ? _raw_spin_unlock_irqrestore+0xd/0x10 > [ 6.720393] [<c073bb73>] ? byt_gpio_direction_input+0x43/0x50 > [ 6.720398] [<c073bb30>] ? byt_gpio_set+0x70/0x70 > [ 6.720404] [<c073eb0a>] gpiod_direction_output+0x2a/0x50 > [ 6.720413] [<f7fe768b>] goodix_ts_probe+0x2fb/0x5fd [goodix_backport] > [ 6.720422] [<c0909691>] i2c_device_probe+0x101/0x1b0 > [ 6.720428] [<c0612e95>] ? sysfs_create_link+0x25/0x50 > [ 6.720436] [<f7fe7390>] ? goodix_ts_irq_handler+0x1f0/0x1f0 [goodix_backport] > [ 6.720442] [<c0819c52>] ? driver_sysfs_add+0x62/0x80 > [ 6.720448] [<c081a56a>] driver_probe_device+0x1ca/0x460 > [ 6.720454] [<c081a800>] ? driver_probe_device+0x460/0x460 > [ 6.720461] [<c078d0b1>] ? acpi_driver_match_device+0x36/0x3f > [ 6.720467] [<c081a879>] __driver_attach+0x79/0x80 > [ 6.720473] [<c081a800>] ? driver_probe_device+0x460/0x460 > [ 6.720478] [<c0818467>] bus_for_each_dev+0x57/0xa0 > [ 6.720484] [<c0819dfe>] driver_attach+0x1e/0x20 > [ 6.720489] [<c081a800>] ? driver_probe_device+0x460/0x460 > [ 6.720494] [<c08199bf>] bus_add_driver+0x1ef/0x290 > [ 6.720501] [<f7ca7000>] ? 0xf7ca7000 > [ 6.720506] [<f7ca7000>] ? 0xf7ca7000 > [ 6.720512] [<c081b07d>] driver_register+0x5d/0xf0 > [ 6.720518] [<c090a3ca>] i2c_register_driver+0x2a/0xa0 > [ 6.720524] [<c040046f>] ? do_one_initcall+0x9f/0x200 > [ 6.720531] [<f7ca7012>] goodix_ts_driver_init+0x12/0x1000 [goodix_backport] > [ 6.720536] [<c040047a>] do_one_initcall+0xaa/0x200 > [ 6.720541] [<f7ca7000>] ? 0xf7ca7000 > [ 6.720547] [<c05801c8>] ? free_vmap_area_noflush+0x38/0x80 > [ 6.720554] [<c0594b95>] ? kmem_cache_alloc_trace+0x175/0x1f0 > [ 6.720560] [<c0a9c64f>] ? do_init_module+0x21/0x1a1 > [ 6.720565] [<c0a9c64f>] ? do_init_module+0x21/0x1a1 > [ 6.720572] [<c0a9c67e>] do_init_module+0x50/0x1a1 > [ 6.720578] [<c04d917b>] load_module+0x1ceb/0x22f0 > [ 6.720585] [<c04d6159>] ? copy_module_from_fd.isra.47+0xf9/0x190 > [ 6.720592] [<c04d99a5>] SyS_finit_module+0xa5/0xf0 > [ 6.720598] [<c056490b>] ? vm_mmap_pgoff+0x9b/0xc0 > [ 6.720605] [<c0aa26df>] sysenter_do_call+0x12/0x12 > [ 6.720610] ---[ end trace d5183b3e60f0f675 ]--- Hi Bastien, I've been looking into the warning you mentioned above. All the Goodix patches in this series must use the interrupt pin as output: the functionality implemented depends on this, as specified in the Goodix datasheet (functionality includes reset, writing configuration, power management, ESD protection). The Baytrail pinctrl driver prints some warnings when pins marked with the DIRECT_IRQ flag are used as output [1] [2]. This flag is set by the BIOS and could indicate an actual HW problem or a buggy BIOS. I am actually testing these changes on a Baytrail platform that has the same pinctrl driver, but did not run into this problem. As far as I can tell, the only way to find out if it is a HW or a BIOS problem is to test if using the interrupt pin as output actually works (by testing the functionality that directly depends on it). I think we have two options here. 1. I could remove the new functionality for your platforms. Unfortunately this would mean none of the new features will be available on your devices, but that will get rid of the warning entirely. 2. I can send some additional patches that will simplify testing the configuration update to the Goodix device. I think this feature is the easiest to test so we can determine if writing to the interrupt pin actually works. However, even if it is a BIOS problem and the code will work, the warning will still be printed in dmesg. What do you think? Thanks, Irina [1] https://lkml.org/lkml/2014/6/2/654 [2] https://lkml.org/lkml/2014/9/18/129
Powered by blists - more mailing lists