[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <55BA665A.4080103@cogentembedded.com>
Date: Thu, 30 Jul 2015 21:00:58 +0300
From: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To: Nathan Sullivan <nathan.sullivan@...com>, f.fainelli@...il.com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] net/phy: micrel: Reenable interrupts during resume
Hello.
On 07/30/2015 06:15 PM, Nathan Sullivan wrote:
> The ksz9031 has a behavior where it will clear the interrupt enable bits
> when leaving power down. To work around this, make sure the interrupt
> bits are in the state they are expected to be when resuming.
> Signed-off-by: Nathan Sullivan <nathan.sullivan@...com>
> ---
> Changes for V2: Actually make sure it compiles this time.
> ---
> drivers/net/phy/micrel.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 499185e..9774582 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -447,6 +447,22 @@ static int ksz9031_center_flp_timing(struct phy_device *phydev)
> return genphy_restart_aneg(phydev);
> }
>
> +static int ksz9031_resume(struct phy_device *phydev)
> +{
> + int result;
> +
> + result = genphy_resume(phydev);
> +
I don't think empty line is needed here. Sorry for missing it in the first
posting...
> + if (result)
> + return result;
> +
> + /* This phy will reset interrupt enables when leaving power down */
> + if (PHY_INTERRUPT_ENABLED & phydev->interrupts)
> + result = kszphy_config_intr(phydev);
> +
> + return result;
> +}
> +
[...]
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists