lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20150731194002.644093681@linuxfoundation.org>
Date:	Fri, 31 Jul 2015 12:37:53 -0700
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org, Vincent Fann <vincent_fann@...ltek.com>,
	Shao Fu <shaofu@...ltek.com>,
	Larry Finger <Larry.Finger@...inger.net>,
	Kalle Valo <kvalo@...eaurora.org>
Subject: [PATCH 4.1 022/267] rtlwifi: Remove the clear interrupt routine from all drivers

4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vincent Fann <vincent_fann@...ltek.com>

commit 1277fa2ab2f9a624a4b0177119ca13b5fd65edd0 upstream.

Several of these drivers have there TX randomly blocked for 3~5 seconds while
measuring tx throughput (iperf). The root couse happens in rtl_pci_flush().
The function uses a while-loop to wait for TX queue length to decrease to 0.
The TX queue length counts the number of packets that are queued in the driver.
The driver relys on the TX OK interrupt to return skb and reduce TX queue length.

The interrupt subroutine disables interupts, reads the interrupt registers, and
then clears the registers in the beginning of _rtl_pci_interrupt(). After all
interupts process are finished, the driver invokes enable_interrupt() to enable
interupts. This behavior is normal for an interrupt subroutine.

But enable_interrupt() invokes clear_interrupt() again. This unexpected interrupt
clearing may cleari me fresh TX OK interrupts. These missing interrupts cause TX
queue length to never reduce to 0i, which causes rtl_pci_flush() to be stuck in
unterminated while-loop.

This patch removes clear_interrupt() in enable_interrupt() to avoid this behavior.

Signed-off-by: Vincent Fann <vincent_fann@...ltek.com>
Signed-off-by: Shao Fu <shaofu@...ltek.com>
Signed-off-by: Larry Finger <Larry.Finger@...inger.net>
Signed-off-by: Kalle Valo <kvalo@...eaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c |   16 ----------------
 drivers/net/wireless/rtlwifi/rtl8192ee/hw.c |   17 -----------------
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c |   13 -------------
 drivers/net/wireless/rtlwifi/rtl8723be/hw.c |   17 -----------------
 drivers/net/wireless/rtlwifi/rtl8821ae/hw.c |   20 --------------------
 5 files changed, 83 deletions(-)

--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -1354,27 +1354,11 @@ void rtl88ee_set_qos(struct ieee80211_hw
 	}
 }
 
-static void rtl88ee_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HSISR);
-	rtl_write_dword(rtlpriv, REG_HSISR, tmp);
-}
-
 void rtl88ee_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
-	rtl88ee_clear_interrupt(hw);/*clear it here first*/
 	rtl_write_dword(rtlpriv, REG_HIMR,
 			rtlpci->irq_mask[0] & 0xFFFFFFFF);
 	rtl_write_dword(rtlpriv, REG_HIMRE,
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c
@@ -1584,28 +1584,11 @@ void rtl92ee_set_qos(struct ieee80211_hw
 	}
 }
 
-static void rtl92ee_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HSISR);
-	rtl_write_dword(rtlpriv, REG_HSISR, tmp);
-}
-
 void rtl92ee_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
-	rtl92ee_clear_interrupt(hw);/*clear it here first*/
-
 	rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
 	rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
 	rtlpci->irq_enabled = true;
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -1258,18 +1258,6 @@ void rtl8723e_set_qos(struct ieee80211_h
 	}
 }
 
-static void rtl8723e_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-}
-
 void rtl8723e_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -1284,7 +1272,6 @@ void rtl8723e_disable_interrupt(struct i
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-	rtl8723e_clear_interrupt(hw);/*clear it here first*/
 	rtl_write_dword(rtlpriv, 0x3a8, IMR8190_DISABLED);
 	rtl_write_dword(rtlpriv, 0x3ac, IMR8190_DISABLED);
 	rtlpci->irq_enabled = false;
--- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -1634,28 +1634,11 @@ void rtl8723be_set_qos(struct ieee80211_
 	}
 }
 
-static void rtl8723be_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HSISR);
-	rtl_write_dword(rtlpriv, REG_HSISR, tmp);
-}
-
 void rtl8723be_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
-	rtl8723be_clear_interrupt(hw);/*clear it here first*/
-
 	rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
 	rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
 	rtlpci->irq_enabled = true;
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
@@ -2253,31 +2253,11 @@ void rtl8821ae_set_qos(struct ieee80211_
 	}
 }
 
-static void rtl8821ae_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	/*printk("clear interrupt first:\n");
-	printk("0x%x = 0x%08x\n",REG_HISR, tmp);*/
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	/*printk("0x%x = 0x%08x\n",REG_HISRE, tmp);*/
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HSISR);
-	/*printk("0x%x = 0x%08x\n",REG_HSISR, tmp);*/
-	rtl_write_dword(rtlpriv, REG_HSISR, tmp);
-}
-
 void rtl8821ae_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
-	rtl8821ae_clear_interrupt(hw);/*clear it here first*/
-
 	rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
 	rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
 	rtlpci->irq_enabled = true;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ