[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1438310471.24722.4.camel@mhfsdcap03>
Date: Fri, 31 Jul 2015 10:41:11 +0800
From: leilk liu <leilk.liu@...iatek.com>
To: Jonas Gorski <jogo@...nwrt.org>
CC: Mark Brown <broonie@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Sascha Hauer <s.hauer@...gutronix.de>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
<linux-spi@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH v4 1/3] dt-binding: spi: Mediatek: Document devicetree
bindings for spi bus
Hi Jonas,
On Thu, 2015-07-30 at 21:27 +0200, Jonas Gorski wrote:
> Hi,
>
> On Wed, Jul 29, 2015 at 1:04 PM, Leilk Liu <leilk.liu@...iatek.com> wrote:
> > Signed-off-by: Leilk Liu <leilk.liu@...iatek.com>
> > ---
> > .../devicetree/bindings/spi/spi-mt65xx.txt | 38 ++++++++++++++++++++++
> > 1 file changed, 38 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/spi/spi-mt65xx.txt
> >
> > diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
> > new file mode 100644
> > index 0000000..f8005d6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
> > @@ -0,0 +1,38 @@
> > +MTK SPI device
>
> You are calling it "MediaTek SPI controller" in the Kconfig entry, so
> you should call it that here as well.
>
OK, I will fix it.
> > +
> > +Required properties:
> > +- compatible: should be one of the following.
> > + - mediatek,mt8173-spi: for mt8173 platforms
> > + - mediatek,mt8135-spi: for mt8135 platforms
> > + - mediatek,mt6589-spi: for mt6589 platforms
> > +
> > +- #address-cells: should be 1.
> > +
> > +- #size-cells: should be 0.
> > +
> > +- reg: Address and length of the register set for the device
> > +
> > +- interrupts: Should contain spi interrupt
> > +
> > +- clocks: phandles to input clocks.
> > +
> > +- clock-names: tuple listing input clock names.
> > + Required elements: "main"
> > +
> > +- pad-select: should specify spi pad used, only required for MT8173.
> > + This value should be 0~3.
>
> As already commented on the v3, this is a vendor property, and must
> have a vendor prefix, so it must be called "mediatek,pad-select".
>
OK, I will fix it on the next version.
> > +
> > +Example:
> > +
> > +- SoC Specific Portion:
> > +spi: spi@...0a000 {
> > + compatible = "mediatek,mt8173-spi";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0 0x1100a000 0 0x1000>;
> > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&pericfg CLK_PERI_SPI0>;
> > + clock-names = "main";
> > + pad-select = <0>;
> > + status = "disabled";
> > +};
>
>
> Jonas
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists