linux-kernel - [PATCH 1/2] ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1438341127-7175-2-git-send-email-wens@csie.org>
Date:	Fri, 31 Jul 2015 19:12:06 +0800
From:	Chen-Yu Tsai <wens@...e.org>
To:	Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc:	Chen-Yu Tsai <wens@...e.org>, linux-arm-kernel@...ts.infradead.org,
	linux-sunxi@...glegroups.com, linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE

Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security
System) drivers by default. EXTCON is needed by the updated sun4i USB
PHY driver.

While at it, enable FHANDLE, which is needed by systemd and newer
versions of udev.

And get rid of POWER_RESET, as the sun6i power reset driver has been
removed in favor of proper sun6i watchdog support.

Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
 arch/arm/configs/sunxi_defconfig | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 7ebc346bf9fa..52cc0686524f 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -1,3 +1,4 @@
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -72,12 +73,12 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_SUN6I_P2WI=y
 CONFIG_SPI=y
 CONFIG_SPI_SUN4I=y
 CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
@@ -109,7 +110,12 @@ CONFIG_RTC_CLASS=y
 # CONFIG_RTC_INTF_PROC is not set
 CONFIG_RTC_DRV_SUN6I=y
 CONFIG_RTC_DRV_SUNXI=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_SUN6I=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXTCON=y
+CONFIG_PWM=y
+CONFIG_PWM_SUN4I=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_EXT4_FS=y
@@ -123,3 +129,4 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
+CONFIG_CRYPTO_DEV_SUN4I_SS=y
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/