linux-kernel - [PATCH v4 0/8] Goodix touchscreen enhancements

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1438364532-27150-1-git-send-email-irina.tirdea@intel.com>
Date:	Fri, 31 Jul 2015 20:42:04 +0300
From:	Irina Tirdea <irina.tirdea@...el.com>
To:	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Bastien Nocera <hadess@...ess.net>, linux-input@...r.kernel.org
Cc:	Mark Rutland <mark.rutland@....com>,
	Octavian Purdila <octavian.purdila@...el.com>,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
	Irina Tirdea <irina.tirdea@...el.com>
Subject: [PATCH v4 0/8] Goodix touchscreen enhancements

Add several enhancements to the Goodix touchscreen driver.

I have added the esd_timeout DT property only for initialization to
get more feedback on this variant of the ESD patch.

Bastien, I have considered that both your boards (specified for rotated
screen quirk) have the reset pin declared first in the ACPI table.
Please let me know if that is correct.

I have also added an entry in sysfs to dump the config and a script that will
help create a new config for the device, if you want to look into the problem
with the Baytrail pinctrl warning.

Thanks,
Irina

Changes in v4:
 - use dmi quirk to determine the order of irq and reset pins
 - use actual config length depending on device
 - add sysfs interface to dump config
 - initialize esd timeout from ACPI/DT propery

Changes in v3:
 - dropped the first 3 patches that got merged
 - handle -EPROBE_DEFER and -ENOENT for gpio pins
 - skip functionality depending on the gpio pins if the pins are not
properly initialized from ACPI/DT (reset, write config, power management,
ESD)
 - dropped #ifdef CONFIG_PM_SLEEP and annotated with __maybe_unused instead
 - use sysfs property to set ESD timeout instead of ACPI/DT property
 - use request_firmware_nowait to read configuration firmware and use defaults
if firmware is not found
 - use ACPI IDs to determine the order of the GPIO pins in the ACPI tables
(interrupt pin first or reset pin first)

Changes in v2:
 - use request_firmware instead of ACPI/DT property for config
 - dropped "input: goodix: add ACPI IDs for GT911 and GT9271" patch
 - add ACPI DSDT excerpt in commit message where necessary
 - add comments for suspend/resume sleep values
 - dropped the checkpatch fixes that did not make sense
 - added Bastien's ack to the first patch

Irina Tirdea (8):
  Input: goodix - reset device at init
  Input: goodix - use actual config length for each device type
  Input: goodix - write configuration data to device
  Input: goodix - add power management support
  Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send
  Input: goodix - add support for ESD
  Input: goodix - add sysfs interface to dump config
  DO NOT APPLY! goodix configuration update helper

 .../bindings/input/touchscreen/goodix.txt          |  11 +
 drivers/input/touchscreen/goodix.c                 | 652 +++++++++++++++++++--
 tools/touch-goodix-generate-fw.sh                  |  39 ++
 3 files changed, 665 insertions(+), 37 deletions(-)
 create mode 100755 tools/touch-goodix-generate-fw.sh

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/