| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1438547414-21370-1-git-send-email-fabio.falzoi84@gmail.com>
Date: Sun, 2 Aug 2015 22:30:14 +0200
From: Fabio Falzoi <fabio.falzoi84@...il.com>
To: thomas.petazzoni@...e-electrons.com, noralf@...nnes.org
Cc: gregkh@...uxfoundation.org, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org,
Fabio Falzoi <fabio.falzoi84@...il.com>
Subject: [PATCH v3] Staging: fbtft: Use a struct to describe each LCD controller
Use a struct flexfb_lcd_controller to holds chip properties, instead of
relying on a long 'if - else if' chain.
This allows to:
- use a simple linear search to verify if a certain LCD controller
model is supported or not.
- add support for a new LCD chip controller simply defining a new
flexfb_lcd_controller struct.
Signed-off-by: Fabio Falzoi <fabio.falzoi84@...il.com>
Acked-by: Noralf Trønnes <noralf@...nnes.org>
---
drivers/staging/fbtft/flexfb.c | 232 ++++++++++++++++++++++++-----------------
1 file changed, 136 insertions(+), 96 deletions(-)
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
index ce6e3ae..b3a68c9 100644
--- a/drivers/staging/fbtft/flexfb.c
+++ b/drivers/staging/fbtft/flexfb.c
@@ -126,6 +126,109 @@ static int ssd1351_init[] = { -1, 0xfd, 0x12, -1, 0xfd, 0xb1, -1, 0xae, -1, 0xb3
-1, 0xab, 0x01, -1, 0xb1, 0x32, -1, 0xb4, 0xa0, 0xb5, 0x55, -1, 0xbb, 0x17, -1, 0xbe, 0x05,
-1, 0xc1, 0xc8, 0x80, 0xc8, -1, 0xc7, 0x0f, -1, 0xb6, 0x01, -1, 0xa6, -1, 0xaf, -3 };
+/**
+ * struct flexfb_lcd_controller - Describes the LCD controller properties
+ * @name: Model name of the chip
+ * @width: Width of display in pixels
+ * @height: Height of display in pixels
+ * @setaddrwin: Which set_addr_win() implementation to use
+ * @regwidth: LCD Controller Register width in bits
+ * @init_seq: LCD initialization sequence
+ * @init_seq_sz: Size of LCD initialization sequence
+ */
+struct flexfb_lcd_controller {
+ const char *name;
+ unsigned int width;
+ unsigned int height;
+ unsigned int setaddrwin;
+ unsigned int regwidth;
+ int *init_seq;
+ int init_seq_sz;
+};
+
+static const struct flexfb_lcd_controller flexfb_chip_table[] = {
+ {
+ .name = "st7735r",
+ .width = 120,
+ .height = 160,
+ .init_seq = st7735r_init,
+ .init_seq_sz = ARRAY_SIZE(st7735r_init),
+ },
+ {
+ .name = "hx8340bn",
+ .width = 176,
+ .height = 220,
+ .init_seq = hx8340bn_init,
+ .init_seq_sz = ARRAY_SIZE(hx8340bn_init),
+ },
+ {
+ .name = "ili9225",
+ .width = 176,
+ .height = 220,
+ .regwidth = 16,
+ .init_seq = ili9225_init,
+ .init_seq_sz = ARRAY_SIZE(ili9225_init),
+ },
+ {
+ .name = "ili9225",
+ .width = 176,
+ .height = 220,
+ .regwidth = 16,
+ .init_seq = ili9225_init,
+ .init_seq_sz = ARRAY_SIZE(ili9225_init),
+ },
+ {
+ .name = "ili9225",
+ .width = 176,
+ .height = 220,
+ .regwidth = 16,
+ .init_seq = ili9225_init,
+ .init_seq_sz = ARRAY_SIZE(ili9225_init),
+ },
+ {
+ .name = "ili9320",
+ .width = 240,
+ .height = 320,
+ .setaddrwin = 1,
+ .regwidth = 16,
+ .init_seq = ili9320_init,
+ .init_seq_sz = ARRAY_SIZE(ili9320_init),
+ },
+ {
+ .name = "ili9325",
+ .width = 240,
+ .height = 320,
+ .setaddrwin = 1,
+ .regwidth = 16,
+ .init_seq = ili9325_init,
+ .init_seq_sz = ARRAY_SIZE(ili9325_init),
+ },
+ {
+ .name = "ili9341",
+ .width = 240,
+ .height = 320,
+ .init_seq = ili9341_init,
+ .init_seq_sz = ARRAY_SIZE(ili9341_init),
+ },
+ {
+ .name = "ssd1289",
+ .width = 240,
+ .height = 320,
+ .setaddrwin = 2,
+ .regwidth = 16,
+ .init_seq = ssd1289_init,
+ .init_seq_sz = ARRAY_SIZE(ssd1289_init),
+ },
+ {
+ .name = "ssd1351",
+ .width = 128,
+ .height = 128,
+ .setaddrwin = 3,
+ .init_seq = ssd1351_init,
+ .init_seq_sz = ARRAY_SIZE(ssd1351_init),
+ },
+};
+
/* ili9320, ili9325 */
static void flexfb_set_addr_win_1(struct fbtft_par *par,
int xs, int ys, int xe, int ye)
@@ -247,8 +350,38 @@ static int flexfb_verify_gpios_db(struct fbtft_par *par)
return 0;
}
+static void flexfb_chip_load_param(const struct flexfb_lcd_controller *chip)
+{
+ if (!width)
+ width = chip->width;
+ if (!height)
+ height = chip->height;
+ setaddrwin = chip->setaddrwin;
+ if (chip->regwidth)
+ regwidth = chip->regwidth;
+ if (!init_num) {
+ initp = chip->init_seq;
+ initp_num = chip->init_seq_sz;
+ }
+}
+
static struct fbtft_display flex_display = { };
+static int flexfb_chip_init(const struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(flexfb_chip_table); i++)
+ if (!strcmp(chip, flexfb_chip_table[i].name)) {
+ flexfb_chip_load_param(&flexfb_chip_table[i]);
+ return 0;
+ }
+
+ dev_err(dev, "chip=%s is not supported\n", chip);
+
+ return -EINVAL;
+}
+
static int flexfb_probe_common(struct spi_device *sdev,
struct platform_device *pdev)
{
@@ -269,102 +402,9 @@ static int flexfb_probe_common(struct spi_device *sdev,
sdev ? "'SPI device'" : "'Platform device'");
if (chip) {
-
- if (!strcmp(chip, "st7735r")) {
- if (!width)
- width = 128;
- if (!height)
- height = 160;
- if (init_num == 0) {
- initp = st7735r_init;
- initp_num = ARRAY_SIZE(st7735r_init);
- }
-
- } else if (!strcmp(chip, "hx8340bn")) {
- if (!width)
- width = 176;
- if (!height)
- height = 220;
- setaddrwin = 0;
- if (init_num == 0) {
- initp = hx8340bn_init;
- initp_num = ARRAY_SIZE(hx8340bn_init);
- }
-
- } else if (!strcmp(chip, "ili9225")) {
- if (!width)
- width = 176;
- if (!height)
- height = 220;
- setaddrwin = 0;
- regwidth = 16;
- if (init_num == 0) {
- initp = ili9225_init;
- initp_num = ARRAY_SIZE(ili9225_init);
- }
-
- } else if (!strcmp(chip, "ili9320")) {
- if (!width)
- width = 240;
- if (!height)
- height = 320;
- setaddrwin = 1;
- regwidth = 16;
- if (init_num == 0) {
- initp = ili9320_init;
- initp_num = ARRAY_SIZE(ili9320_init);
- }
-
- } else if (!strcmp(chip, "ili9325")) {
- if (!width)
- width = 240;
- if (!height)
- height = 320;
- setaddrwin = 1;
- regwidth = 16;
- if (init_num == 0) {
- initp = ili9325_init;
- initp_num = ARRAY_SIZE(ili9325_init);
- }
-
- } else if (!strcmp(chip, "ili9341")) {
- if (!width)
- width = 240;
- if (!height)
- height = 320;
- setaddrwin = 0;
- regwidth = 8;
- if (init_num == 0) {
- initp = ili9341_init;
- initp_num = ARRAY_SIZE(ili9341_init);
- }
-
- } else if (!strcmp(chip, "ssd1289")) {
- if (!width)
- width = 240;
- if (!height)
- height = 320;
- setaddrwin = 2;
- regwidth = 16;
- if (init_num == 0) {
- initp = ssd1289_init;
- initp_num = ARRAY_SIZE(ssd1289_init);
- }
-
- } else if (!strcmp(chip, "ssd1351")) {
- if (!width)
- width = 128;
- if (!height)
- height = 128;
- setaddrwin = 3;
- if (init_num == 0) {
- initp = ssd1351_init;
- initp_num = ARRAY_SIZE(ssd1351_init);
- }
- } else {
- dev_err(dev, "chip=%s is not supported\n", chip);
- return -EINVAL;
- }
+ ret = flexfb_chip_init(dev);
+ if (ret)
+ return ret;
}
if (width == 0 || height == 0) {
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists