| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1438572504-5042-1-git-send-email-pengyu.ma@windriver.com>
Date: Mon, 3 Aug 2015 11:28:24 +0800
From: Pengyu Ma <pengyu.ma@...driver.com>
To: <bryan.odonoghue@...el.com>, <balbi@...com>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<pengyu.ma@...driver.com>
Subject: [PATCH] usb_gadget: fix spin_lock in pch_udc
When remove module g_serial on quark platform, the following Warning on:
Modules linked in: usb_f_acm u_serial g_serial(-) pch_udc libcomposite configfs udc_core
ad7298 industrialio_triggered_buffer kfifo_buf tpm_i2c_infineon indus
CPU: 0 PID: 369 Comm: modprobe Not tainted 3.14.29ltsi-WR7.0.0.0_standard #6
Hardware name: Intel Corp. QUARK/CrossHill, BIOS 0x010100F5 01/01/2014
f641df0c f641df0c f641dec8 c15ac7fa f641defc c103084f c16c2356 f641df28
00000171 c16b855c 000009dd c15b2d6f 000009dd c15b2d6f f6bd2000 faae5480
00000000 f641df14 c10308a3 00000009 f641df0c c16c2356 f641df28 f641df2c
Call Trace:
[<c15ac7fa>] dump_stack+0x16/0x18
[<c103084f>] warn_slowpath_common+0x7f/0xa0
[<c15b2d6f>] ? preempt_count_sub+0x6f/0xc0
[<c15b2d6f>] ? preempt_count_sub+0x6f/0xc0
[<c10308a3>] warn_slowpath_fmt+0x33/0x40
[<c15b2d6f>] preempt_count_sub+0x6f/0xc0
[<faadbc82>] pch_udc_pcd_pullup+0x32/0xa0 [pch_udc]
[<fa9747d9>] usb_gadget_remove_driver+0x29/0x60 [udc_core]
[<fa974869>] usb_gadget_unregister_driver+0x59/0x80 [udc_core]
[<faa78310>] usb_composite_unregister+0x10/0x20 [libcomposite]
[<faae50f1>] cleanup+0xd/0xf [g_serial]
[<c1084c47>] SyS_delete_module+0xf7/0x150
[<c111f8dd>] ? ____fput+0xd/0x10
[<c104b2ae>] ? task_work_run+0x6e/0xa0
[<c15afda5>] syscall_call+0x7/0x7
g_serial module on quark is depended on pch_udc module, ttyGSX cann't recieve
data and warning on when remove g_serial.
It was unlocked before the modification of the structure it was protecting,
fix it as "lock -> unlock" to resolve this.
Signed-off-by: Pengyu Ma <pengyu.ma@...driver.com>
---
drivers/usb/gadget/udc/pch_udc.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 613547f..2a35dd4 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -620,9 +620,9 @@ static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
dev->vbus_session = 1;
} else {
if (dev->driver && dev->driver->disconnect) {
- spin_unlock(&dev->lock);
- dev->driver->disconnect(&dev->gadget);
spin_lock(&dev->lock);
+ dev->driver->disconnect(&dev->gadget);
+ spin_unlock(&dev->lock);
}
pch_udc_set_disconnect(dev);
dev->vbus_session = 0;
@@ -1191,9 +1191,9 @@ static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
pch_udc_reconnect(dev);
} else {
if (dev->driver && dev->driver->disconnect) {
- spin_unlock(&dev->lock);
- dev->driver->disconnect(&dev->gadget);
spin_lock(&dev->lock);
+ dev->driver->disconnect(&dev->gadget);
+ spin_unlock(&dev->lock);
}
pch_udc_set_disconnect(dev);
}
@@ -1488,11 +1488,11 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
req->dma_mapped = 0;
}
ep->halted = 1;
- spin_unlock(&dev->lock);
+ spin_lock(&dev->lock);
if (!ep->in)
pch_udc_ep_clear_rrdy(ep);
usb_gadget_giveback_request(&ep->ep, &req->req);
- spin_lock(&dev->lock);
+ spin_unlock(&dev->lock);
ep->halted = halted;
}
@@ -2414,7 +2414,7 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
else /* OUT */
dev->gadget.ep0 = &ep->ep;
- spin_unlock(&dev->lock);
+ spin_lock(&dev->lock);
/* If Mass storage Reset */
if ((dev->setup_data.bRequestType == 0x21) &&
(dev->setup_data.bRequest == 0xFF))
@@ -2422,7 +2422,7 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
/* call gadget with setup data received */
setup_supported = dev->driver->setup(&dev->gadget,
&dev->setup_data);
- spin_lock(&dev->lock);
+ spin_unlock(&dev->lock);
if (dev->setup_data.bRequestType & USB_DIR_IN) {
ep->td_data->status = (ep->td_data->status &
@@ -2594,9 +2594,9 @@ static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
empty_req_queue(ep);
}
if (dev->driver) {
- spin_unlock(&dev->lock);
- usb_gadget_udc_reset(&dev->gadget, dev->driver);
spin_lock(&dev->lock);
+ usb_gadget_udc_reset(&dev->gadget, dev->driver);
+ spin_unlock(&dev->lock);
}
}
@@ -2675,9 +2675,9 @@ static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
dev->ep[i].halted = 0;
}
dev->stall = 0;
- spin_unlock(&dev->lock);
- ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
spin_lock(&dev->lock);
+ ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
+ spin_unlock(&dev->lock);
}
/**
@@ -2712,9 +2712,9 @@ static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
dev->stall = 0;
/* call gadget zero with setup data received */
- spin_unlock(&dev->lock);
- ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
spin_lock(&dev->lock);
+ ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
+ spin_unlock(&dev->lock);
}
/**
@@ -2747,18 +2747,18 @@ static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
if (dev_intr & UDC_DEVINT_US) {
if (dev->driver
&& dev->driver->suspend) {
- spin_unlock(&dev->lock);
- dev->driver->suspend(&dev->gadget);
spin_lock(&dev->lock);
+ dev->driver->suspend(&dev->gadget);
+ spin_unlock(&dev->lock);
}
vbus = pch_vbus_gpio_get_value(dev);
if ((dev->vbus_session == 0)
&& (vbus != 1)) {
if (dev->driver && dev->driver->disconnect) {
- spin_unlock(&dev->lock);
- dev->driver->disconnect(&dev->gadget);
spin_lock(&dev->lock);
+ dev->driver->disconnect(&dev->gadget);
+ spin_unlock(&dev->lock);
}
pch_udc_reconnect(dev);
} else if ((dev->vbus_session == 0)
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists