lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1438696464-59858-6-git-send-email-scott.shu@mediatek.com>
Date:	Tue, 4 Aug 2015 21:54:21 +0800
From:	Scott Shu <scott.shu@...iatek.com>
To:	Matthias Brugger <matthias.bgg@...il.com>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Mark Rutland <mark.rutland@....com>
CC:	<devicetree@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>,
	<linux-mediatek@...ts.infradead.org>, <wsd_upstream@...iatek.com>,
	<loda.chou@...iatek.com>, <jades.shih@...iatek.com>,
	<Mars.Cheng@...iatek.com>, <scott.shu@...il.com>,
	Scott Shu <scott.shu@...iatek.com>
Subject: [PATCH v3 5/8] ARM: mediatek: add smp bringup code for MT6580

Add support for cpu enable-method "mediatek,mt6580-smp" for booting
secondary CPUs on MT6580.

Signed-off-by: Scott Shu <scott.shu@...iatek.com>
---
 arch/arm/mach-mediatek/platsmp.c |  137 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 137 insertions(+)

diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index a5bc108..94f7865 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -21,10 +21,16 @@
 #include <linux/of_address.h>
 #include <linux/string.h>
 #include <linux/threads.h>
+#include <linux/delay.h>
+#include <asm/cacheflush.h>
+
+#include <linux/soc/mediatek/scpsys.h>
 
 #define MTK_MAX_CPU		8
 #define MTK_SMP_REG_SIZE	0x1000
 
+static DEFINE_SPINLOCK(boot_lock);
+
 struct mtk_smp_boot_info {
 	unsigned long smp_base;
 	unsigned int jump_reg;
@@ -56,6 +62,126 @@ static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
 static void __iomem *mtk_smp_base;
 static const struct mtk_smp_boot_info *mtk_smp_info;
 
+#ifdef CONFIG_HOTPLUG_CPU
+static int mt6580_cpu_kill(unsigned cpu)
+{
+	int ret;
+
+	ret = spm_cpu_mtcmos_off(cpu, 1);
+	if (ret < 0)
+		return 0;
+
+	return 1;
+}
+
+static void mt6580_cpu_die(unsigned int cpu)
+{
+	for (;;)
+		cpu_do_idle();
+}
+#endif
+
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	/* Make sure this is visible to other CPUs */
+	smp_wmb();
+	sync_cache_w(&pen_release);
+}
+
+/*
+ * Refer common "pen" secondary release method
+ */
+static int mt6580_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+	int ret;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	write_pen_release(cpu);
+
+	/*
+	 * CPU power on control by SPM
+	 */
+	ret = spm_cpu_mtcmos_on(cpu);
+	if (ret < 0) {
+		spin_unlock(&boot_lock);
+		return -ENXIO;
+	}
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		/* Read barrier */
+		smp_rmb();
+
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return (pen_release != -1 ? -ENXIO : 0);
+}
+
+static void mt6580_secondary_init(unsigned int cpu)
+{
+	/*
+	 * Let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	write_pen_release(-1);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+#define MT6580_INFRACFG_AO	0x10001000
+#define SW_ROM_PD		BIT(31)
+
+static void __init mt6580_smp_prepare_cpus(unsigned int max_cpus)
+{
+	static void __iomem *infracfg_ao_base;
+
+	infracfg_ao_base = ioremap(MT6580_INFRACFG_AO, 0x1000);
+	if (!infracfg_ao_base) {
+		pr_err("%s: Unable to map I/O memory\n", __func__);
+		return;
+	}
+
+	/* Enable bootrom power down mode */
+	writel_relaxed(readl(infracfg_ao_base + 0x804) | SW_ROM_PD,
+		       infracfg_ao_base + 0x804);
+
+	/* Write the address of slave startup into boot address
+	   register for bootrom power down mode */
+	writel_relaxed(virt_to_phys(secondary_startup_arm),
+		       infracfg_ao_base + 0x800);
+
+	iounmap(infracfg_ao_base);
+}
+
 static int mtk_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (!mtk_smp_base)
@@ -142,3 +268,14 @@ static struct smp_operations mt6589_smp_ops __initdata = {
 	.smp_boot_secondary = mtk_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(mt6589_smp, "mediatek,mt6589-smp", &mt6589_smp_ops);
+
+static struct smp_operations mt6580_smp_ops __initdata = {
+	.smp_prepare_cpus = mt6580_smp_prepare_cpus,
+	.smp_secondary_init = mt6580_secondary_init,
+	.smp_boot_secondary = mt6580_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill = mt6580_cpu_kill,
+	.cpu_die = mt6580_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(mt6580_smp, "mediatek,mt6580-smp", &mt6580_smp_ops);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ