[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1438701646-7876-3-git-send-email-kishon@ti.com>
Date: Tue, 4 Aug 2015 20:50:41 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: <rogerq@...com>, <tony@...mide.com>, <t-kristo@...com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<kishon@...com>
CC: <balbi@...com>, <nsekhar@...com>
Subject: [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe
No functional change. Previously omap_control_phy_power() was used to power
off the PHY during probe. But once PIPE3 driver is adapted to use syscon,
omap_control_phy_power() cannot be used. Hence used ti_pipe3_power_off
to power off the PHY.
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
Acked-by: Roger Quadros <rogerq@...com>
---
drivers/phy/phy-ti-pipe3.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 072d308..9782c16 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -474,8 +474,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
if (ret)
return ret;
- omap_control_phy_power(phy->control_dev, 0);
-
platform_set_drvdata(pdev, phy);
pm_runtime_enable(phy->dev);
@@ -494,6 +492,8 @@ static int ti_pipe3_probe(struct platform_device *pdev)
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy);
+ ti_pipe3_power_off(generic_phy);
+
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider))
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists