Message-ID: <CAErSpo4JoBxmwwscckH+hrSYFbqKgX4KAiRGS2ZDQxxZ_So63Q@mail.gmail.com>
Date:	Tue, 4 Aug 2015 14:27:27 -0500
From:	Bjorn Helgaas <bhelgaas@...gle.com>
To:	Jarod Wilson <jarod@...hat.com>
Cc:	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
	"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>
Subject: Re: [PATCH] pci/pciehp: bail on bogus pcie reads from removed devices

On Tue, Aug 4, 2015 at 1:46 PM, Jarod Wilson <jarod@...hat.com> wrote:
> On 8/4/2015 1:51 PM, Bjorn Helgaas wrote:
>>
>> On Tue, Aug 04, 2015 at 01:21:23PM -0400, Jarod Wilson wrote:
>>>
>>> On 8/4/2015 12:56 PM, Bjorn Helgaas wrote:
>>>>
>>>> On Tue, Aug 04, 2015 at 10:05:18AM -0400, Jarod Wilson wrote:
>>>>>
>>>>> On Mon, Aug 3, 2015 at 12:14 AM, Bjorn Helgaas <bhelgaas@...gle.com>
>>>>> wrote:
>>>>>
>>>>>> On Tue, Jul 21, 2015 at 12:25:30PM -0400, Jarod Wilson wrote:
>>>>>>>
>>>>>>> https://bugzilla.kernel.org/show_bug.cgi?id=99841
>>>>>>>
>>>>>>> Seems like a read of all 1's from a register of a device that has
>>>>>>> gone
>>>>>>> away should be taken as a sign that the device has gone away.
>>>>>>> Section 6.2.10 of the PCIE spec (v4.0, rev 0.3, Feb 19, 2014)
>>>>>>> suggests as
>>>>>>> much with this snippet:
>>>>>>>
>>>>>>> |IMPLEMENTATION NOTE
>>>>>>> |Data Value of All 1’s
>>>>>>> |Many platforms, including those supporting RP Extensions for DPC,
>>>>>>> can
>>>>>>> |return a data value of all 1’s to software when an error is
>>>>>>> associated
>>>>>>> |with a PCI Express Configuration, I/O, or Memory Read Request.
>>>>>>> During
>>>>>>
>>>>>> DPC,
>>>>>>>
>>>>>>> |the Downstream Port discards Requests destined for the Link and
>>>>>>
>>>>>> completes
>>>>>>>
>>>>>>> |them with an error (i.e., either with an Unsupported Request (UR) or
>>>>>>> |Completer Abort (CA) Completion Status). By ending a series of MMIO
>>>>>>> or
>>>>>>> |configuration space operations with a read to an address with a
>>>>>>> known
>>>>>>> |data value not equal to all 1’s, software may determine if a
>>>>>>> Completer
>>>>>>> |has been removed or DPC has been triggered.
>>>>>>>
>>>>>>> I'm not sure the above is directly relevant to this case, but the
>>>>>>> same
>>>>>>> principle (reading all 1's means the device is probably gone) seems
>>>>>>> to
>>>>>>> hold.
>>>>>>>
>>>>>>> This is based on part of a debugging patch Bjorn posted in the
>>>>>>> referenced
>>>>>>> bugzilla, and its required to make the HP ZBook G2 I've got here not
>>>>>>> barf
>>>>>>> when disconnecting a thunderbolt ethernet adapter and corrupt memory.
>>>>>>>
>>>>>>> Suggested-by: Bjorn Helgaas <bhelgaas@...gle.com>
>>>>>>> CC: Bjorn Helgaas <bhelgaas@...gle.com>
>>>>>>> CC: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
>>>>>>> CC: linux-pci@...r.kernel.org
>>>>>>> Signed-off-by: Jarod Wilson <jarod@...hat.com>
>>>>>>
>>>>>>
>>>>>> Hi Jarod,
>>>>>>
>>>>>> I think there are two issues here:
>>>>>>
>>>>>>    1) pciehp doesn't handle all 1's correctly
>>>>>>    2) use-after-free of hotplug_slot
>>>>>>
>>>>>> This patch is for the first issue.  I think it's correct, but I still
>>>>>> have a question or two.   I attached an updated version of the patch
>>>>>> and changelog.
>>>>>>
>>>>>> Here's the path I think we're taking: 03:03.0 receives pciehp
>>>>>> interrupt for removal (link down and card not present), and we call
>>>>>> pciehp_unconfigure_device() for 05:00.0 and everything downstream from
>>>>>> it.  Part of this is removing 06:00.0.  I expected this would use this
>>>>>> path:
>>>>>>
>>>>>>    pcie_port_remove_service            # .remove method for 06:00.0
>>>>>>      dev_printk("unloading service driver ...")
>>>>>>      pciehp_remove                     # hpdriver_portdrv.remove
>>>>>>        pciehp_release_ctrl
>>>>>>          pcie_shutdown_notification
>>>>>>            pcie_disable_notification
>>>>>>              pcie_write_cmd
>>>>>>                pcie_do_write_cmd(..., true)    # wait
>>>>>>                  pcie_wait_cmd
>>>>>>                    pcie_poll_cmd
>>>>>>                      read PCI_EXP_SLTSTA        # would get 0xffff
>>>>>>                  read PCI_EXPT_SLTCTL        # would get 0xffff
>>>>>>
>>>>>> so I added checks for ~0 data in pcie_poll_cmd() and
>>>>>> pcie_do_write_cmd().
>>>>>>
>>>>>> But the dmesg log shows that we were in pcie_isr(), and I don't
>>>>>> understand yet how we got there.  Can you help figure that out?  Maybe
>>>>>> put a dump_stack() in pcie_isr() or something?
>>>>>
>>>>>
>>>>> [ 1949.102247] pciehp 0000:03:03.0:pcie24: pcie_isr: intr_loc 108
>>>>> [ 1949.102252] pciehp 0000:03:03.0:pcie24: Presence/Notify input change
>>>>> [ 1949.102256] pciehp 0000:03:03.0:pcie24: Card not present on Slot(3)
>>>>> [ 1949.102262] pciehp 0000:03:03.0:pcie24: Data Link Layer State change
>>>>> [ 1949.102266] pciehp 0000:03:03.0:pcie24: slot(3): Link Down event
>>>>> [ 1949.102281] pciehp 0000:03:03.0:pcie24: Surprise Removal
>>>>> [ 1949.102286] pciehp 0000:03:03.0:pcie24: Link Down event ignored on
>>>>> slot(3): already powering off
>>>>> [ 1949.102288] pciehp 0000:03:03.0:pcie24: Disabling
>>>>> domain:bus:device=0000:05:00
>>>>> [ 1949.102290] pciehp 0000:03:03.0:pcie24: pciehp_unconfigure_device:
>>>>> domain:bus:dev = 0000:05:00
>>>>> [ 1950.321907] tg3 0000:07:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE
>>>>> will not clear MAC_TX_MODE=ffffffff
>>>>> [ 1950.525986] [sched_delayed] sched: RT throttling activated
>>>>> [ 1950.544164] pciehp 0000:06:00.0:pcie24: unloading service driver
>>>>> pciehp
>>>>> [ 1950.544170] pciehp 0000:06:00.0:pcie24: release_slot: physical_slot
>>>>> = 9
>>>>> [ 1950.545016] pciehp 0000:06:00.0:pcie24: Timeout on hotplug command
>>>>> 0x1038 (issued 19092 msec ago)
>>>>> [ 1950.545020] pciehp 0000:06:00.0:pcie24: pcie_do_write_cmd: no
>>>>> response
>>>>
>>>> >from device
>>>>>
>>>>> [ 1950.545021] pciehp 0000:06:00.0:pcie24: pcie_disable_notification:
>>>>> SLOTCTRL d8 write cmd 0
>>>>> [ 1950.545025] pciehp 0000:06:00.0:pcie24: Device has gone away
>>>>> [ 1950.545027] CPU: 0 PID: 12361 Comm: kworker/0:2 Not tainted
>>>>> 3.10.0-302.el7.hp.x86_64 #1
>>>>> [ 1950.545028] Hardware name: Hewlett-Packard HP ZBook 15 G2/2253, BIOS
>>>>> M70
>>>>> Ver. 01.07 02/26/2015
>>>>> [ 1950.545033] Workqueue: pciehp-3 pciehp_power_thread
>>>>> [ 1950.545034]  0000000000000000 00000000f721dd13 ffff8804822ffa78
>>>>> ffffffff81632729
>>>>> [ 1950.545036]  ffff8804822ffac0 ffffffff8133bf64 ffff00000000002e
>>>>> 00000000f721dd13
>>>>> [ 1950.545038]  ffff8804818fab00 ffff880468f70cc0 000000000000002e
>>>>> 0000000000000282
>>>>> [ 1950.545039] Call Trace:
>>>>> [ 1950.545044]  [<ffffffff81632729>] dump_stack+0x19/0x1b
>>>>> [ 1950.545046]  [<ffffffff8133bf64>] pcie_isr+0x264/0x280
>>>>> [ 1950.545048]  [<ffffffff8111b6b9>] __free_irq+0x189/0x220
>>>>> [ 1950.545049]  [<ffffffff8111b7e9>] free_irq+0x49/0xb0
>>>>> [ 1950.545051]  [<ffffffff8133d3b9>] pciehp_release_ctrl+0xb9/0xe0
>>>>> [ 1950.545053]  [<ffffffff81339db3>] pciehp_remove+0x23/0x30
>>>>> [ 1950.545055]  [<ffffffff8133442e>] pcie_port_remove_service+0x4e/0x60
>>>>
>>>>
>>>> Do you have CONFIG_DEBUG_SHIRQ set?  When CONFIG_DEBUG_SHIRQ is set,
>>>> __free_irq() calls the ISR one last time.  It does make sense that the
>>>> driver must be prepared for the ISR to be called at any time before
>>>> free_irq() returns.  I just didn't see a path for the already-removed
>>>> device to generate an actual interrupt.
>>>
>>>
>>> Yup, I've got CONFIG_DEBUG_SHIRQ=y in my config. So I take it we're
>>> hitting the action->handler(irq, dev_id) bit in __free_irq(), after
>>> we've already done a bunch of teardown/removal?
>>
>>
>> OK, good, that explains why we called pcie_isr().
>>
>>>> Can you try the version I posted, with the additional tests in
>>>> pcie_poll_cmd() and pcie_do_write_cmd()?  We should try to read from
>>>> the device there, even before we free the IRQ, so we might see several
>>>> messages.  Maybe there's a way we can be smarter about bailing out
>>>> there.
>>>
>>>
>>> The above was with your additions munged in with the older patch, I
>>> actually do see "pcie_do_write_cmd: no response from device" just
>>> two lines ahead of each "Device has gone away" message from
>>> pcie_isr().
>>>
>>> pciehp 0000:06:00.0:pcie24: pcie_do_write_cmd: no response from device
>>> pciehp 0000:06:00.0:pcie24: pcie_disable_notification: SLOTCTRL d8
>>> write cmd 0
>>> pciehp 0000:06:00.0:pcie24: Device has gone away <- from pcie_isr()
>>
>>
>> Oh, sorry!  I should have noticed that.  I just wanted to make sure I
>> didn't cause a flood of extra messages.
>>
>> I think I'll merge this version (with all three checks).  We still have a
>> slot lifetime issue, but that's a separate problem.
>
>
> Sounds good to me, thanks much for your help on this.
>
> Do we really still have a slot lifetime issue though? It looks to be the
> path from pciehp_release_ctrl that leads to free_irq and __free_irq calling
> pcie_isr one last time, and there's a ctrl_info("Latch %s on Slot(%s)", open
> ? ..., slot_name(slot)); in pcie_isr *if* we aren't bailing when we read all
> 1's from PCI_EXP_SLTSTA. I think when we bail early, we should never see the
> subsequent attempt to read the freed slot.

It's possible that we avoid referencing the freed data, but I don't
have warm fuzzies because it's hard to prove that by analyzing the
source code.  It's hard to even know what to look for -- there's no
clue in the code that says "don't reference slot->hotplug_slot after
this point."  And it feels like a poor design to hang on to that
pointer after the slot has been freed.

IIRC, your initial report mentioned possible memory corruption, and I
don't even have a theory about where that happened.  The
slot->hotplug_slot references I saw were all reads where we printed
junk but shouldn't have actually corrupted anything.

Anyway, I don't know what to do about it, and I don't have time right
now to poke at it, but it does worry me a bit.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists