| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9hhwpxakpj7.fsf@e105922-lin.cambridge.arm.com>
Date: Wed, 05 Aug 2015 11:17:32 +0100
From: Punit Agrawal <punit.agrawal@....com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: linux-pm@...r.kernel.org, lm-sensors@...sensors.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
liviu.dudau@....com, Jean Delvare <jdelvare@...e.de>,
Sudeep Holla <sudeep.holla@....com>
Subject: Re: [PATCH v2 07/10] hwmon: Support sensors exported via ARM SCP interface
Guenter Roeck <linux@...ck-us.net> writes:
> On 08/03/2015 08:22 AM, Punit Agrawal wrote:
>> Create a driver to add support for SoC sensors exported by the System
>> Control Processor (SCP) via the System Control and Power Interface
>> (SCPI). The supported sensor types is one of voltage, temperature,
>> current, and power.
>>
>> The sensor labels and values provided by the SCP are exported via the
>> hwmon sysfs interface.
>>
>> Signed-off-by: Punit Agrawal <punit.agrawal@....com>
>> Cc: Jean Delvare <jdelvare@...e.de>
>> Cc: Guenter Roeck <linux@...ck-us.net>
>> Cc: Sudeep Holla <sudeep.holla@....com>
>
> Looks good for the most part. Single comment below.
> Assuming you fix it up, feel free to add
>
> Acked-by: Guenter Roeck <linux@...ck-us.net>
>
> for v3.
>
> Thanks,
> Guenter
>
>> ---
>> Documentation/hwmon/scpi-hwmon | 33 ++++++++
>> drivers/hwmon/Kconfig | 8 ++
>> drivers/hwmon/Makefile | 1 +
>> drivers/hwmon/scpi-hwmon.c | 183 +++++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 225 insertions(+)
>> create mode 100644 Documentation/hwmon/scpi-hwmon
>> create mode 100644 drivers/hwmon/scpi-hwmon.c
>>
>> diff --git a/Documentation/hwmon/scpi-hwmon b/Documentation/hwmon/scpi-hwmon
>> new file mode 100644
>> index 0000000..4cfcdf2d
>> --- /dev/null
>> +++ b/Documentation/hwmon/scpi-hwmon
>> @@ -0,0 +1,33 @@
>> +Kernel driver scpi-hwmon
>> +========================
>> +
>> +Supported chips:
>> + * Chips based on ARM System Control Processor Interface
>> + Addresses scanned: -
>> + Datasheet: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/index.html
>> +
>> +Author: Punit Agrawal <punit.agrawal@....com>
>> +
>> +Description
>> +-----------
>> +
>> +This driver supports hardware monitoring for SoC's based on the ARM
>> +System Control Processor (SCP) implementing the System Control
>> +Processor Interface (SCPI). The following sensor types are supported
>> +by the SCP -
>> +
>> + * temperature
>> + * voltage
>> + * current
>> + * power
>> +
>> +The SCP interface provides an API to query the available sensors and
>> +their values which are then exported to userspace by this driver.
>> +
>> +Usage Notes
>> +-----------
>> +
>> +The driver relies on device tree node to indicate the presence of SCPI
>> +support in the kernel. See
>> +Documentation/devicetree/bindings/arm/arm,scpi.txt for details of the
>> +devicetree node.
>> \ No newline at end of file
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>> index 4943c3c..c9714b0 100644
>> --- a/drivers/hwmon/Kconfig
>> +++ b/drivers/hwmon/Kconfig
>> @@ -1551,6 +1551,14 @@ config SENSORS_VEXPRESS
>> the ARM Ltd's Versatile Express platform. It can provide wide
>> range of information like temperature, power, energy.
>>
>> +config SENSORS_ARM_SCPI
>> + tristate "ARM SCPI Sensors"
>> + depends on ARM_SCPI_PROTOCOL
>> + help
>> + This driver provides support for temperature, voltage, current
>> + and power sensors available on ARM Ltd's SCP based platforms. The
>> + actual number and type of sensors exported depend the platform.
>> +
>> config SENSORS_VIA_CPUTEMP
>> tristate "VIA CPU temperature sensor"
>> depends on X86
>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>> index 8aba87f..4961710 100644
>> --- a/drivers/hwmon/Makefile
>> +++ b/drivers/hwmon/Makefile
>> @@ -150,6 +150,7 @@ obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
>> obj-$(CONFIG_SENSORS_TWL4030_MADC)+= twl4030-madc-hwmon.o
>> obj-$(CONFIG_SENSORS_V2M_JUNO) += v2m-juno.o
>> obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress.o
>> +obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
>> obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
>> obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
>> obj-$(CONFIG_SENSORS_VT1211) += vt1211.o
>> diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
>> new file mode 100644
>> index 0000000..7e7e06b
>> --- /dev/null
>> +++ b/drivers/hwmon/scpi-hwmon.c
>> @@ -0,0 +1,183 @@
>> +/*
>> + * System Control and Power Interface(SCPI) based hwmon sensor driver
>> + *
>> + * Copyright (C) 2015 ARM Ltd.
>> + * Punit Agrawal <punit.agrawal@....com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/hwmon.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/scpi_protocol.h>
>> +#include <linux/slab.h>
>> +#include <linux/sysfs.h>
>> +
>> +struct sensor_data {
>> + struct scpi_sensor_info info;
>> + struct device_attribute dev_attr_input;
>> + struct device_attribute dev_attr_label;
>> + char input[20];
>> + char label[20];
>> +};
>> +
>> +struct scpi_sensors {
>> + struct scpi_ops *scpi_ops;
>> + struct sensor_data *data;
>> + struct attribute **attrs;
>> + struct attribute_group group;
>> + const struct attribute_group *groups[2];
>> +};
>> +
>> +/* hwmon callback functions */
>> +static ssize_t
>> +scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
>> +{
>> + struct scpi_sensors *scpi_sensors = dev_get_drvdata(dev);
>> + struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
>> + struct sensor_data *sensor;
>> + u32 value;
>> + int ret;
>> +
>> + sensor = container_of(attr, struct sensor_data, dev_attr_input);
>> +
>> + ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
>> + if (ret)
>> + return ret;
>> +
>> + return sprintf(buf, "%u\n", value);
>> +}
>> +
>> +static ssize_t
>> +scpi_show_label(struct device *dev, struct device_attribute *attr, char *buf)
>> +{
>> + struct sensor_data *sensor;
>> +
>> + sensor = container_of(attr, struct sensor_data, dev_attr_label);
>> +
>> + return sprintf(buf, "%s\n", sensor->info.name);
>> +}
>> +
>> +static int scpi_hwmon_probe(struct platform_device *pdev)
>> +{
>> + u16 nr_sensors, i;
>> + int num_temp = 0, num_volt = 0, num_current = 0, num_power = 0;
>> + struct scpi_ops *scpi_ops;
>> + struct device *hwdev, *dev = &pdev->dev;
>> + struct scpi_sensors *scpi_sensors;
>> + int ret;
>> +
>> + scpi_ops = get_scpi_ops();
>> + if (!scpi_ops)
>> + return -EPROBE_DEFER;
>> +
>> + ret = scpi_ops->sensor_get_capability(&nr_sensors);
>> + if (ret || !nr_sensors)
>> + return ret;
>> +
> This will return 0 if nr_sensors == 0. Should it be -ENODEV ?
>
Good catch. I've fixed this up to return -ENODEV.
Thanks for the ack.
Punit
>> + scpi_sensors = devm_kzalloc(dev, sizeof(*scpi_sensors), GFP_KERNEL);
>> + if (!scpi_sensors)
>> + return -ENOMEM;
>> +
>> + scpi_sensors->data = devm_kcalloc(dev, nr_sensors,
>> + sizeof(*scpi_sensors->data), GFP_KERNEL);
>> + if (!scpi_sensors->data)
>> + return -ENOMEM;
>> +
>> + scpi_sensors->attrs = devm_kcalloc(dev, (nr_sensors * 2) + 1,
>> + sizeof(*scpi_sensors->attrs), GFP_KERNEL);
>> + if (!scpi_sensors->attrs)
>> + return -ENOMEM;
>> +
>> + scpi_sensors->scpi_ops = scpi_ops;
>> +
>> + for (i = 0; i < nr_sensors; i++) {
>> + struct sensor_data *sensor = &scpi_sensors->data[i];
>> +
>> + ret = scpi_ops->sensor_get_info(i, &sensor->info);
>> + if (ret)
>> + return ret;
>> +
>> + switch (sensor->info.class) {
>> + case TEMPERATURE:
>> + snprintf(sensor->input, sizeof(sensor->input),
>> + "temp%d_input", num_temp + 1);
>> + snprintf(sensor->label, sizeof(sensor->input),
>> + "temp%d_label", num_temp + 1);
>> + num_temp++;
>> + break;
>> + case VOLTAGE:
>> + snprintf(sensor->input, sizeof(sensor->input),
>> + "in%d_input", num_volt);
>> + snprintf(sensor->label, sizeof(sensor->input),
>> + "in%d_label", num_volt);
>> + num_volt++;
>> + break;
>> + case CURRENT:
>> + snprintf(sensor->input, sizeof(sensor->input),
>> + "curr%d_input", num_current + 1);
>> + snprintf(sensor->label, sizeof(sensor->input),
>> + "curr%d_label", num_current + 1);
>> + num_current++;
>> + break;
>> + case POWER:
>> + snprintf(sensor->input, sizeof(sensor->input),
>> + "power%d_input", num_power + 1);
>> + snprintf(sensor->label, sizeof(sensor->input),
>> + "power%d_label", num_power + 1);
>> + num_power++;
>> + break;
>> + default:
>> + break;
>> + }
>> +
>> + sensor->dev_attr_input.attr.mode = S_IRUGO;
>> + sensor->dev_attr_input.show = scpi_show_sensor;
>> + sensor->dev_attr_input.attr.name = sensor->input;
>> +
>> + sensor->dev_attr_label.attr.mode = S_IRUGO;
>> + sensor->dev_attr_label.show = scpi_show_label;
>> + sensor->dev_attr_label.attr.name = sensor->label;
>> +
>> + scpi_sensors->attrs[i << 1] = &sensor->dev_attr_input.attr;
>> + scpi_sensors->attrs[(i << 1) + 1] = &sensor->dev_attr_label.attr;
>> +
>> + sysfs_attr_init(scpi_sensors->attrs[i << 1]);
>> + sysfs_attr_init(scpi_sensors->attrs[(i << 1) + 1]);
>> + }
>> +
>> + scpi_sensors->group.attrs = scpi_sensors->attrs;
>> + scpi_sensors->groups[0] = &scpi_sensors->group;
>> +
>> + hwdev = devm_hwmon_device_register_with_groups(dev,
>> + "scpi_sensors", scpi_sensors, scpi_sensors->groups);
>> +
>> + return PTR_ERR_OR_ZERO(hwdev);
>> +}
>> +
>> +static const struct of_device_id scpi_of_match[] = {
>> + {.compatible = "arm,scpi-sensors"},
>> + {},
>> +};
>> +
>> +static struct platform_driver scpi_hwmon_platdrv = {
>> + .driver = {
>> + .name = "scpi-hwmon",
>> + .owner = THIS_MODULE,
>> + .of_match_table = scpi_of_match,
>> + },
>> + .probe = scpi_hwmon_probe,
>> +};
>> +module_platform_driver(scpi_hwmon_platdrv);
>> +
>> +MODULE_AUTHOR("Punit Agrawal <punit.agrawal@....com>");
>> +MODULE_DESCRIPTION("ARM SCPI HWMON interface driver");
>> +MODULE_LICENSE("GPL v2");
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists