| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1438785745-15517-3-git-send-email-madalin.bucur@freescale.com>
Date: Wed, 5 Aug 2015 17:42:25 +0300
From: Madalin Bucur <madalin.bucur@...escale.com>
To: <netdev@...r.kernel.org>, <grant.likely@...aro.org>,
<robh+dt@...nel.org>, <f.fainelli@...il.com>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<Igal.Liberman@...escale.com>,
Madalin Bucur <madalin.bucur@...escale.com>
Subject: [PATCH RFC 2/2] fsl_fman: use fixed_phy_status for MEMAC
Use the speed and duplex information from the device tree fixed link
node accessing the status structure parsed by of_phy_parse_fixed_link().
Signed-off-by: Madalin Bucur <madalin.bucur@...escale.com>
---
.../ethernet/freescale/fman/flib/fsl_fman_memac.h | 6 ++--
drivers/net/ethernet/freescale/fman/inc/mac.h | 2 +-
drivers/net/ethernet/freescale/fman/mac/fm_memac.c | 42 ++++++++++++++++------
drivers/net/ethernet/freescale/fman/mac/fm_memac.h | 3 +-
drivers/net/ethernet/freescale/fman/mac/mac.c | 18 +++++++---
5 files changed, 52 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h
index ebf7989..50bed14 100644
--- a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h
@@ -33,8 +33,10 @@
#define __FSL_FMAN_MEMAC_H
#include <linux/io.h>
-
+#include <linux/netdevice.h>
+#include <linux/phy_fixed.h>
#include "fsl_enet.h"
+
/* Num of additional exact match MAC adr regs */
#define MEMAC_NUM_OF_PADDRS 7
@@ -373,7 +375,7 @@ struct memac_cfg {
bool tx_pbl_fwd;
bool debug_mode;
bool wake_on_lan;
- bool fixed_link;
+ struct fixed_phy_status *fixed_link;
u16 max_frame_length;
u16 pause_quanta;
u32 tx_ipg_length;
diff --git a/drivers/net/ethernet/freescale/fman/inc/mac.h b/drivers/net/ethernet/freescale/fman/inc/mac.h
index f86d0bc..fbeb957 100644
--- a/drivers/net/ethernet/freescale/fman/inc/mac.h
+++ b/drivers/net/ethernet/freescale/fman/inc/mac.h
@@ -62,7 +62,7 @@ struct mac_device {
phy_interface_t phy_if;
u32 if_support;
bool link;
- bool fixed_link;
+ struct fixed_phy_status *fixed_link;
u16 speed;
u16 max_speed;
struct device_node *phy_node;
diff --git a/drivers/net/ethernet/freescale/fman/mac/fm_memac.c b/drivers/net/ethernet/freescale/fman/mac/fm_memac.c
index becbb88..3d5ede3 100644
--- a/drivers/net/ethernet/freescale/fman/mac/fm_memac.c
+++ b/drivers/net/ethernet/freescale/fman/mac/fm_memac.c
@@ -71,9 +71,10 @@ static int memac_mii_write_phy_reg(struct memac_t *memac, u8 phy_addr,
}
static void setup_sgmii_internal_phy(struct memac_t *memac, u8 phy_addr,
- bool fixed_link)
+ struct fixed_phy_status *fixed_link)
{
u16 tmp_reg16;
+ enum ethernet_interface enet_if;
enum e_enet_mode enet_mode;
/* In case the higher MACs are used (i.e. the MACs that should
@@ -81,20 +82,37 @@ static void setup_sgmii_internal_phy(struct memac_t *memac, u8 phy_addr,
* Temporary modify enet mode to 1G one, so MII functions can
* work correctly.
*/
+ enet_if = ENET_INTERFACE_FROM_MODE(memac->enet_mode);
enet_mode = memac->enet_mode;
- memac->enet_mode =
- MAKE_ENET_MODE(ENET_INTERFACE_FROM_MODE(memac->enet_mode),
- ENET_SPEED_1000);
+ memac->enet_mode = MAKE_ENET_MODE(enet_if, ENET_SPEED_1000);
/* SGMII mode */
tmp_reg16 = PHY_SGMII_IF_MODE_SGMII;
if (!fixed_link)
/* AN enable */
tmp_reg16 |= PHY_SGMII_IF_MODE_AN;
- else
- /* Fixed link 1Gb FD */
- tmp_reg16 |= PHY_SGMII_IF_MODE_SPEED_GB |
- PHY_SGMII_IF_MODE_DUPLEX_FULL;
+ else {
+ switch (fixed_link->speed) {
+ case 10:
+ tmp_reg16 |= PHY_SGMII_IF_MODE_SPEED_10M;
+ memac->enet_mode = MAKE_ENET_MODE(enet_if,
+ ENET_SPEED_10);
+ break;
+ case 100:
+ tmp_reg16 |= PHY_SGMII_IF_MODE_SPEED_100M;
+ memac->enet_mode = MAKE_ENET_MODE(enet_if,
+ ENET_SPEED_100);
+ break;
+ case 1000: /* fallthrough */
+ default:
+ tmp_reg16 |= PHY_SGMII_IF_MODE_SPEED_GB;
+ break;
+ }
+ if (fixed_link->duplex)
+ tmp_reg16 |= PHY_SGMII_IF_MODE_DUPLEX_FULL;
+ else
+ tmp_reg16 |= PHY_SGMII_IF_MODE_DUPLEX_HALF;
+ }
memac_mii_write_phy_reg(memac, phy_addr, 0x14, tmp_reg16);
/* Device ability according to SGMII specification */
@@ -120,6 +138,7 @@ static void setup_sgmii_internal_phy(struct memac_t *memac, u8 phy_addr,
/* Restart AN */
tmp_reg16 = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
else
+ /* AN disabled */
tmp_reg16 = PHY_SGMII_CR_DEF_VAL & ~PHY_SGMII_CR_AN_ENABLE;
memac_mii_write_phy_reg(memac, phy_addr, 0x0, tmp_reg16);
@@ -370,14 +389,15 @@ int memac_cfg_reset_on_init(struct fm_mac_dev *fm_mac_dev, bool enable)
return 0;
}
-int memac_cfg_fixed_link(struct fm_mac_dev *fm_mac_dev, bool enable)
+int memac_cfg_fixed_link(struct fm_mac_dev *fm_mac_dev,
+ struct fixed_phy_status *fixed_link)
{
struct memac_t *memac = (struct memac_t *)fm_mac_dev;
if (is_init_done(memac->memac_drv_param))
return -EINVAL;
- memac->memac_drv_param->fixed_link = enable;
+ memac->memac_drv_param->fixed_link = fixed_link;
return 0;
}
@@ -524,7 +544,7 @@ int memac_init(struct fm_mac_dev *fm_mac_dev)
enet_addr_t eth_addr;
enum fm_mac_type port_type;
bool slow_10g_if = false;
- bool fixed_link;
+ struct fixed_phy_status *fixed_link;
int err;
u32 reg32 = 0;
diff --git a/drivers/net/ethernet/freescale/fman/mac/fm_memac.h b/drivers/net/ethernet/freescale/fman/mac/fm_memac.h
index 8fcbd64..7c13706 100644
--- a/drivers/net/ethernet/freescale/fman/mac/fm_memac.h
+++ b/drivers/net/ethernet/freescale/fman/mac/fm_memac.h
@@ -104,7 +104,8 @@ int memac_adjust_link(struct fm_mac_dev *fm_mac_dev,
enum ethernet_speed speed);
int memac_cfg_max_frame_len(struct fm_mac_dev *fm_mac_dev, u16 new_val);
int memac_cfg_reset_on_init(struct fm_mac_dev *fm_mac_dev, bool enable);
-int memac_cfg_fixed_link(struct fm_mac_dev *fm_mac_dev, bool enable);
+int memac_cfg_fixed_link(struct fm_mac_dev *fm_mac_dev,
+ struct fixed_phy_status *fixed_link);
int memac_enable(struct fm_mac_dev *fm_mac_dev, enum comm_mode mode);
int memac_disable(struct fm_mac_dev *fm_mac_dev, enum comm_mode mode);
int memac_init(struct fm_mac_dev *fm_mac_dev);
diff --git a/drivers/net/ethernet/freescale/fman/mac/mac.c b/drivers/net/ethernet/freescale/fman/mac/mac.c
index c44544b..4a0ab7e 100644
--- a/drivers/net/ethernet/freescale/fman/mac/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac/mac.c
@@ -39,6 +39,8 @@
#include <linux/of_mdio.h>
#include <linux/device.h>
#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/phy_fixed.h>
#include "mac.h"
@@ -363,7 +365,6 @@ static int mac_probe(struct platform_device *_of_dev)
}
mac_dev->link = false;
- mac_dev->fixed_link = false;
mac_dev->speed = phy2speed[mac_dev->phy_if];
mac_dev->max_speed = mac_dev->speed;
mac_dev->if_support = DTSEC_SUPPORTED;
@@ -383,10 +384,18 @@ static int mac_probe(struct platform_device *_of_dev)
/* Get the rest of the PHY information */
mac_dev->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
if (!mac_dev->phy_node && of_phy_is_fixed_link(mac_node)) {
- err = of_phy_register_fixed_link(mac_node);
- if (err)
+ struct phy_device *phy;
+
+ mac_dev->fixed_link = kzalloc(sizeof(*mac_dev->fixed_link),
+ GFP_KERNEL);
+ if (of_phy_parse_fixed_link(mac_node, mac_dev->fixed_link))
+ goto _return_dev_set_drvdata;
+
+ phy = fixed_phy_register(PHY_POLL, mac_dev->fixed_link,
+ mac_node);
+ if (IS_ERR(phy))
goto _return_dev_set_drvdata;
- mac_dev->fixed_link = true;
+
mac_dev->phy_node = of_node_get(mac_node);
}
@@ -429,6 +438,7 @@ static int mac_probe(struct platform_device *_of_dev)
_return_of_node_put:
of_node_put(dev_node);
_return_dev_set_drvdata:
+ kfree(mac_dev->fixed_link);
dev_set_drvdata(dev, NULL);
_return:
return err;
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists