| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <000101d0d05d$d668e940$833abbc0$@com>
Date: Fri, 7 Aug 2015 00:37:32 +0900
From: "Jingoo Han" <jingoohan1@...il.com>
To: "'Bjorn Andersson'" <bjorn.andersson@...ymobile.com>
Cc: "'Rob Herring'" <robh+dt@...nel.org>,
"'Pawel Moll'" <pawel.moll@....com>,
"'Mark Rutland'" <mark.rutland@....com>,
"'Ian Campbell'" <ijc+devicetree@...lion.org.uk>,
"'Kumar Gala'" <galak@...eaurora.org>,
"'Bryan Wu'" <cooloney@...il.com>,
"'Richard Purdie'" <rpurdie@...ys.net>,
"'Jacek Anaszewski'" <j.anaszewski@...sung.com>,
"'Lee Jones'" <lee.jones@...aro.org>,
"'Jean-Christophe Plagniol-Villard'" <plagnioj@...osoft.com>,
"'Tomi Valkeinen'" <tomi.valkeinen@...com>,
"'Rob Clark'" <robdclark@...il.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-leds@...r.kernel.org>,
<linux-fbdev@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
"'Jingoo Han'" <jingoohan1@...il.com>
Subject: Re: [PATCH v2] backlight: pm8941-wled: Move PM8941 WLED driver to backlight
On Wednesday, July 22, 2015 9:45 AM, Bjorn Andersson wrote:
>
> The Qualcomm PM8941 WLED block is used for backlight and should therefor
> be in the backlight framework and not in the LED framework. This moves
> the driver and adapts to the backlight api instead.
>
> Acked-by: Jacek Anaszewski <j.anaszewski@...sung.com>
> Tested-by: Rob Clark <robdclark@...il.com>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...ymobile.com>
Acked-by: Jingoo Han <jingoohan1@...il.com>
Best regards,
Jingoo Han
> ---
> .../backlight/pm8941-wled.txt} | 5 +-
> drivers/leds/Kconfig | 8 ---
> drivers/leds/Makefile | 1 -
> drivers/video/backlight/Kconfig | 7 +++
> drivers/video/backlight/Makefile | 1 +
> .../backlight/pm8941-wled.c} | 60 ++++++++++------------
> 6 files changed, 35 insertions(+), 47 deletions(-)
> rename Documentation/devicetree/bindings/{leds/leds-pm8941-wled.txt => video/backlight/pm8941-
> wled.txt} (84%)
> rename drivers/{leds/leds-pm8941-wled.c => video/backlight/pm8941-wled.c} (90%)
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
> b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
> similarity index 84%
> rename from Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
> rename to Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
> index a85a964d61f5..424f8444a6cd 100644
> --- a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
> +++ b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
> @@ -5,10 +5,7 @@ Required properties:
> - reg: slave address
>
> Optional properties:
> -- label: The label for this led
> - See Documentation/devicetree/bindings/leds/common.txt
> -- linux,default-trigger: Default trigger assigned to the LED
> - See Documentation/devicetree/bindings/leds/common.txt
> +- label: The name of the backlight device
> - qcom,cs-out: bool; enable current sink output
> - qcom,cabc: bool; enable content adaptive backlight control
> - qcom,ext-gen: bool; use externally generated modulator signal to dim
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 9ad35f72ab4c..b8d4b965ca2a 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -578,14 +578,6 @@ config LEDS_VERSATILE
> This option enabled support for the LEDs on the ARM Versatile
> and RealView boards. Say Y to enabled these.
>
> -config LEDS_PM8941_WLED
> - tristate "LED support for the Qualcomm PM8941 WLED block"
> - depends on LEDS_CLASS
> - select REGMAP
> - help
> - This option enables support for the 'White' LED block
> - on Qualcomm PM8941 PMICs.
> -
> comment "LED Triggers"
> source "drivers/leds/trigger/Kconfig"
>
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 8d6a24a2f513..abe96d960ebe 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -63,7 +63,6 @@ obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
> obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
> obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
> obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
> -obj-$(CONFIG_LEDS_PM8941_WLED) += leds-pm8941-wled.o
> obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
>
> # LED SPI Drivers
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 0505b796d743..5ffa4b4e26c0 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -299,6 +299,13 @@ config BACKLIGHT_TOSA
> If you have an Sharp SL-6000 Zaurus say Y to enable a driver
> for its backlight
>
> +config BACKLIGHT_PM8941_WLED
> + tristate "Qualcomm PM8941 WLED Driver"
> + select REGMAP
> + help
> + If you have the Qualcomm PM8941, say Y to enable a driver for the
> + WLED block.
> +
> config BACKLIGHT_SAHARA
> tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
> depends on X86
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index d67073f9d421..16ec534cff30 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -48,6 +48,7 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
> obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o
> obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o
> obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
> +obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o
> obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
> obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
> obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
> diff --git a/drivers/leds/leds-pm8941-wled.c b/drivers/video/backlight/pm8941-wled.c
> similarity index 90%
> rename from drivers/leds/leds-pm8941-wled.c
> rename to drivers/video/backlight/pm8941-wled.c
> index bf64a593fbf1..c704c3236034 100644
> --- a/drivers/leds/leds-pm8941-wled.c
> +++ b/drivers/video/backlight/pm8941-wled.c
> @@ -11,7 +11,7 @@
> */
>
> #include <linux/kernel.h>
> -#include <linux/leds.h>
> +#include <linux/backlight.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> @@ -76,30 +76,29 @@ struct pm8941_wled_config {
> };
>
> struct pm8941_wled {
> + const char *name;
> struct regmap *regmap;
> u16 addr;
>
> - struct led_classdev cdev;
> -
> struct pm8941_wled_config cfg;
> };
>
> -static int pm8941_wled_set(struct led_classdev *cdev,
> - enum led_brightness value)
> +static int pm8941_wled_update_status(struct backlight_device *bl)
> {
> - struct pm8941_wled *wled;
> + struct pm8941_wled *wled = bl_get_data(bl);
> + u16 val = bl->props.brightness;
> u8 ctrl = 0;
> - u16 val;
> int rc;
> int i;
>
> - wled = container_of(cdev, struct pm8941_wled, cdev);
> + if (bl->props.power != FB_BLANK_UNBLANK ||
> + bl->props.fb_blank != FB_BLANK_UNBLANK ||
> + bl->props.state & BL_CORE_FBBLANK)
> + val = 0;
>
> - if (value != 0)
> + if (val != 0)
> ctrl = PM8941_WLED_REG_MOD_EN_BIT;
>
> - val = value * PM8941_WLED_REG_VAL_MAX / LED_FULL;
> -
> rc = regmap_update_bits(wled->regmap,
> wled->addr + PM8941_WLED_REG_MOD_EN,
> PM8941_WLED_REG_MOD_EN_MASK, ctrl);
> @@ -128,16 +127,6 @@ static int pm8941_wled_set(struct led_classdev *cdev,
> return rc;
> }
>
> -static void pm8941_wled_set_brightness(struct led_classdev *cdev,
> - enum led_brightness value)
> -{
> - if (pm8941_wled_set(cdev, value)) {
> - dev_err(cdev->dev, "Unable to set brightness\n");
> - return;
> - }
> - cdev->brightness = value;
> -}
> -
> static int pm8941_wled_setup(struct pm8941_wled *wled)
> {
> int rc;
> @@ -336,12 +325,9 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev)
> }
> wled->addr = val;
>
> - rc = of_property_read_string(dev->of_node, "label", &wled->cdev.name);
> + rc = of_property_read_string(dev->of_node, "label", &wled->name);
> if (rc)
> - wled->cdev.name = dev->of_node->name;
> -
> - wled->cdev.default_trigger = of_get_property(dev->of_node,
> - "linux,default-trigger", NULL);
> + wled->name = dev->of_node->name;
>
> *cfg = pm8941_wled_config_defaults;
> for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) {
> @@ -377,8 +363,14 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev)
> return 0;
> }
>
> +static const struct backlight_ops pm8941_wled_ops = {
> + .update_status = pm8941_wled_update_status,
> +};
> +
> static int pm8941_wled_probe(struct platform_device *pdev)
> {
> + struct backlight_properties props;
> + struct backlight_device *bl;
> struct pm8941_wled *wled;
> struct regmap *regmap;
> int rc;
> @@ -403,13 +395,14 @@ static int pm8941_wled_probe(struct platform_device *pdev)
> if (rc)
> return rc;
>
> - wled->cdev.brightness_set = pm8941_wled_set_brightness;
> -
> - rc = devm_led_classdev_register(&pdev->dev, &wled->cdev);
> - if (rc)
> - return rc;
> -
> - platform_set_drvdata(pdev, wled);
> + memset(&props, 0, sizeof(struct backlight_properties));
> + props.type = BACKLIGHT_RAW;
> + props.max_brightness = PM8941_WLED_REG_VAL_MAX;
> + bl = devm_backlight_device_register(&pdev->dev, wled->name,
> + &pdev->dev, wled,
> + &pm8941_wled_ops, &props);
> + if (IS_ERR(bl))
> + return PTR_ERR(bl);
>
> return 0;
> };
> @@ -432,4 +425,3 @@ module_platform_driver(pm8941_wled_driver);
>
> MODULE_DESCRIPTION("pm8941 wled driver");
> MODULE_LICENSE("GPL v2");
> -MODULE_ALIAS("platform:pm8941-wled");
> --
> 1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists