| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1438902033-31477-3-git-send-email-eric@anholt.net>
Date: Thu, 6 Aug 2015 16:00:31 -0700
From: Eric Anholt <eric@...olt.net>
To: linux-arm-kernel@...ts.infradead.org
Cc: linux-rpi-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Stephen Warren <swarren@...dotorg.org>,
Lee Jones <lee@...nel.org>, devicetree@...r.kernel.org,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Eric Anholt <eric@...olt.net>
Subject: [PATCH v4 2/4] irqchip: bcm2835: Add support for being used as a second level controller.
The BCM2836 (Raspberry Pi 2) uses two levels of interrupt handling
with the CPU-local interrupts being the root, so we need to register
ours as chained off of the CPU's local interrupt.
Signed-off-by: Eric Anholt <eric@...olt.net>
Acked-by: Stephen Warren <swarren@...dotorg.org>
---
v3: Use a separate compatible value to indicate that the parent
interrupt controller irq is required (Requested by Stephen Warren)
.../brcm,bcm2835-armctrl-ic.txt | 25 ++++++++++++-
drivers/irqchip/irq-bcm2835.c | 43 ++++++++++++++++++++--
2 files changed, 64 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 7da578d..2d6c8bb 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -5,9 +5,14 @@ The BCM2835 contains a custom top-level interrupt controller, which supports
controller, or the HW block containing it, is referred to occasionally
as "armctrl" in the SoC documentation, hence naming of this binding.
+The BCM2836 contains the same interrupt controller with the same
+interrupts, but the per-CPU interrupt controller is the root, and an
+interrupt there indicates that the ARMCTRL has an interrupt to handle.
+
Required properties:
-- compatible : should be "brcm,bcm2835-armctrl-ic"
+- compatible : should be "brcm,bcm2835-armctrl-ic" or
+ "brcm,bcm2836-armctrl-ic"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
@@ -20,6 +25,12 @@ Required properties:
The 2nd cell contains the interrupt number within the bank. Valid values
are 0..7 for bank 0, and 0..31 for bank 1.
+Additional required properties for brcm,bcm2836-armctrl-ic:
+- interrupt-parent : Specifies the parent interrupt controller when this
+ controller is the second level.
+- interrupts : Specifies the interrupt on the parent for this interrupt
+ controller to handle.
+
The interrupt sources are as follows:
Bank 0:
@@ -102,9 +113,21 @@ Bank 2:
Example:
+/* BCM2835, first level */
intc: interrupt-controller {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
+
+/* BCM2836, second level */
+intc: interrupt-controller {
+ compatible = "brcm,bcm2836-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&local_intc>;
+ interrupts = <8>;
+};
diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 382450a..f968d3f 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -97,6 +97,7 @@ struct armctrl_ic {
static struct armctrl_ic intc __read_mostly;
static void __exception_irq_entry bcm2835_handle_irq(
struct pt_regs *regs);
+static void bcm2836_chained_handle_irq(unsigned int irq, struct irq_desc *desc);
static void armctrl_mask_irq(struct irq_data *d)
{
@@ -140,7 +141,8 @@ static const struct irq_domain_ops armctrl_ops = {
};
static int __init armctrl_of_init(struct device_node *node,
- struct device_node *parent)
+ struct device_node *parent,
+ bool is_2836)
{
void __iomem *base;
int irq, b, i;
@@ -169,10 +171,34 @@ static int __init armctrl_of_init(struct device_node *node,
}
}
- set_handle_irq(bcm2835_handle_irq);
+ if (is_2836) {
+ int parent_irq = irq_of_parse_and_map(node, 0);
+
+ if (!parent_irq) {
+ panic("%s: unable to get parent interrupt.\n",
+ node->full_name);
+ }
+ irq_set_chained_handler(parent_irq, bcm2836_chained_handle_irq);
+ } else {
+ set_handle_irq(bcm2835_handle_irq);
+ }
+
return 0;
}
+static int __init bcm2835_armctrl_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return armctrl_of_init(node, parent, false);
+}
+
+static int __init bcm2836_armctrl_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return armctrl_of_init(node, parent, true);
+}
+
+
/*
* Handle each interrupt across the entire interrupt controller. This reads the
* status register before handling each interrupt, which is necessary given that
@@ -220,4 +246,15 @@ static void __exception_irq_entry bcm2835_handle_irq(
handle_IRQ(irq_linear_revmap(intc.domain, hwirq), regs);
}
-IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic", armctrl_of_init);
+static void bcm2836_chained_handle_irq(unsigned int irq, struct irq_desc *desc)
+{
+ u32 hwirq;
+
+ while ((hwirq = get_next_armctrl_hwirq()) != ~0)
+ generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
+}
+
+IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic",
+ bcm2835_armctrl_of_init);
+IRQCHIP_DECLARE(bcm2836_armctrl_ic, "brcm,bcm2836-armctrl-ic",
+ bcm2836_armctrl_of_init);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists