linux-kernel - Re: [PATCH v9 6/6] block: loop: support DIO & AIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CACVXFVO9Wpa+9QWCzMOVQOramd1KsfvtC=vcf-EsCQum-9Omuw@mail.gmail.com>
Date:	Sun, 9 Aug 2015 09:04:32 -0400
From:	Ming Lei <ming.lei@...onical.com>
To:	Christoph Hellwig <hch@...radead.org>
Cc:	Jens Axboe <axboe@...nel.dk>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Dave Kleikamp <dave.kleikamp@...cle.com>,
	Zach Brown <zab@...bo.net>,
	Maxim Patlasov <mpatlasov@...allels.com>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Alexander Viro <viro@...iv.linux.org.uk>,
	Tejun Heo <tj@...nel.org>, Dave Chinner <david@...morbit.com>
Subject: Re: [PATCH v9 6/6] block: loop: support DIO & AIO

On Sun, Aug 9, 2015 at 2:44 AM, Christoph Hellwig <hch@...radead.org> wrote:
> On Fri, Aug 07, 2015 at 04:25:52AM -0400, Ming Lei wrote:
>> On Fri, Aug 7, 2015 at 3:43 AM, Christoph Hellwig <hch@...radead.org> wrote:
>> > I really disagree with the per-cmd use_dio tracking.
>>
>> Could you explain it in a bit?
>>
>> >
>> > If we know at setup time that the loop device sector size is smaller
>> > than the sector size of the underlying device we should never allow
>> > dio, and othewise it should always work for data.
>>
>> Yes, that is just what I did in v7, and we can only do dio in case
>> of 512 byte sector size of backing device(not considering the
>> following patches from Hannes).
>>
>> When sector size of backing device isn't 512, most of transfer(buffered I/O
>> and normal dio) is still 4k aligned, that is why I suggest to use per-cmd
>> use_dio tracking.
>>
>> The patch avoids the race between buffered io and dio, doesn't it?
>> The introduced cost is trivial and most of times it needn't to wait for
>> completion of pending dio.
>
> All block filesystems can do direct I/O on a _sector size_, not
> _block size_ boundary, e.g. for the typical setup of a 4k block size
> xfs/btrfs/ext4 file system on a 512 byte sector device you can do 512
> byte aligned direct I/O.

It isn't the problem which lo_drain_pending_dio() in this patch is
trying to avoid/fix.

Now the logical block size of loop is 512byte, but the sector size of
backing device may be 4K, so we can't do 512 byte algined direct
I/O to the filesystem in this situation.

With runtime switch to buffered I/O we can fix this problem, but
most of times it won't fall in this case.

>
>> > is no need for draining or mode checking for an fsync - FLUSH is always
>> > only guranteed to flush out I/O that has completed by the time it's
>> > issued.
>>
>> Could you point it out in the patch?
>
> Basically your lo_drain_pending_dio() functionality is not needed.

For non-512 byte sector size of backing device, it is needed as
I described above.

Thanks,
Ming
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/