linux-kernel - Re: [PATCH 1/3] tty: serial: 8250_omap: do not use RX DMA if pause is not supported

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 10 Aug 2015 14:54:10 +0300
From:	Peter Ujfalusi <peter.ujfalusi@...com>
To:	Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
	Vinod Koul <vinod.koul@...el.com>,
	Russell King <rmk+kernel@....linux.org.uk>,
	<peter@...leysoftware.com>
CC:	Dan Williams <dan.j.williams@...el.com>,
	<dmaengine@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<nsekhar@...com>, <linux-omap@...r.kernel.org>,
	<linux-serial@...r.kernel.org>, <john.ogness@...utronix.de>
Subject: Re: [PATCH 1/3] tty: serial: 8250_omap: do not use RX DMA if pause is
 not supported

On 08/07/2015 11:00 PM, Sebastian Andrzej Siewior wrote:
> The 8250-omap driver requires the DMA-engine driver to support the pause
> command in order to properly turn off programmed RX transfer before the
> driver stars manually reading from the FIFO.
> The lacking support of the requirement has been discovered recently. In
> order to stay safe here we disable support for RX-DMA as soon as we
> notice that it does not work. This should happen very early.
> If the user does not want to see this backtrace he can either disable
> DMA support (completely or RX-only) or backport the required patches for
> edma / omap-dma once they hit mainline.
> 
> Cc: <stable@...r.kernel.org>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
> ---
>  drivers/tty/serial/8250/8250_omap.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
> index 0340ee6ba970..07a11e0935e4 100644
> --- a/drivers/tty/serial/8250/8250_omap.c
> +++ b/drivers/tty/serial/8250/8250_omap.c
> @@ -112,6 +112,7 @@ struct omap8250_priv {
>  	struct work_struct qos_work;
>  	struct uart_8250_dma omap8250_dma;
>  	spinlock_t rx_dma_lock;
> +	bool rx_dma_broken;
>  };
>  
>  static u32 uart_read(struct uart_8250_port *up, u32 reg)
> @@ -761,6 +762,7 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
>  	struct omap8250_priv	*priv = p->port.private_data;
>  	struct uart_8250_dma	*dma = p->dma;
>  	unsigned long		flags;
> +	int ret;
>  
>  	spin_lock_irqsave(&priv->rx_dma_lock, flags);
>  
> @@ -769,7 +771,9 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
>  		return;
>  	}
>  
> -	dmaengine_pause(dma->rxchan);
> +	ret = dmaengine_pause(dma->rxchan);
> +	if (WARN_ON_ONCE(ret))
> +		priv->rx_dma_broken = true;

I don't think this is good thing for the stable _and_ for the mainline at the
same time:
in stable the rx DMA should not be allowed since the stable kernels does not
allow pause/resume with omap-dma, so there the rx DMA should be just disabled
for UART. This change will cause regression since it introduce a WARN_ON_ONCE,
which will be printed if the user tries to use non working feature.

In mainline you will eventually going to have pause/resume support so this
patch will make no sense there.

>  
>  	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
>  
> @@ -813,6 +817,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
>  		break;
>  	}
>  
> +	if (priv->rx_dma_broken)
> +		return -EINVAL;
> +
>  	spin_lock_irqsave(&priv->rx_dma_lock, flags);
>  
>  	if (dma->rx_running)
> 


-- 
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/