Message-Id: <1439507142-2965-3-git-send-email-eric@anholt.net>
Date:	Thu, 13 Aug 2015 16:05:41 -0700
From:	Eric Anholt <eric@...olt.net>
To:	linux-clk@...r.kernel.org
Cc:	linux-arm-kernel@...ts.infradead.org,
	linux-rpi-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Stephen Warren <swarren@...dotorg.org>,
	Lee Jones <lee@...nel.org>,
	Stephen Boyd <sboyd@...eaurora.org>,
	Mike Turquette <mturquette@...aro.org>,
	devicetree@...r.kernel.org, Eric Anholt <eric@...olt.net>
Subject: [PATCH v5 2/3] clk: Add a Raspberry Pi-specific clock driver.

Unfortunately, the clock manager's registers are not accessible by the
ARM, so we have to request that the firmware modify our clocks for us.

This driver only registers the clocks at the point they are requested
by a client driver.  This is partially to support returning
-EPROBE_DEFER when the firmware driver isn't supported yet, but it
also avoids issues with disabling "unused" clocks due to them not yet
being connected to their consumers in the DT.

Signed-off-by: Eric Anholt <eric@...olt.net>
---

v2: Declare the mutex static (from review by Baruch Siach), merge
    description and copyright comments.

v3: Update for new rpi firmware API.  Update the compatible string.
    Make the firmware handle be under a vendor-namespaced property.
    Make the DT indices match the firmware clock IDs.  Move the driver
    under the firmware driver's Kconfig, since it requires it.  Move a
    container_of() from 2 callers into the callee.

v4: Update commit message to mention subsystem.  Add #defines for a
    couple of bitfield checks, and use the bitfield check for
    rpi_clk_is_on().  Return an error when appropriate in
    rpi_clk_is_on(), and don't return specific rpi_firmware_property()
    errors in other places when we were only returning -EINVAL.  Add
    some comment text describing how return values work from
    the firmware.

v5: Restructure as a platform_driver on suggestion from Michael
    Turquette.  This works around the -EPROBE_DEFER problem, so now we
    can register all of our clocks at probe time.  Store the current
    clock rate in the struct, and avoid asking for no-op changes.  It
    appears that a no-op change of the pixel clock while the clock is
    being used (at boot time when the KMS driver calls
    clk_prepare_enable()) actually breaks the display.  Dropped
    Stephen's ack since this is a pretty significant rewrite.

 drivers/clk/Makefile          |   1 +
 drivers/clk/clk-raspberrypi.c | 286 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 287 insertions(+)
 create mode 100644 drivers/clk/clk-raspberrypi.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index c4cf075..ad0a4a5 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o
 obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
 obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
 obj-$(CONFIG_ARCH_BCM2835)		+= clk-bcm2835.o
+obj-$(CONFIG_RASPBERRYPI_FIRMWARE)	+= clk-raspberrypi.o
 obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
diff --git a/drivers/clk/clk-raspberrypi.c b/drivers/clk/clk-raspberrypi.c
new file mode 100644
index 0000000..a65a028
--- /dev/null
+++ b/drivers/clk/clk-raspberrypi.c
@@ -0,0 +1,286 @@
+/*
+ * Implements a clock provider for the clocks controlled by the
+ * firmware on Raspberry Pi.
+ *
+ * These clocks are controlled by the CLOCKMAN peripheral in the
+ * hardware, but the ARM doesn't have access to the registers for
+ * them.  As a result, we have to call into the firmware to get it to
+ * enable, disable, and set their frequencies.
+ *
+ * We don't have an interface for getting the set of frequencies
+ * available from the hardware.  We can request a min/max, but other
+ * than that we have to request a frequency and take what it gives us.
+ *
+ * Copyright © 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <dt-bindings/clk/raspberrypi.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+#define RPI_FIRMWARE_CLOCK_STATE_ENABLED		(1 << 0)
+#define RPI_FIRMWARE_CLOCK_STATE_ERROR			(1 << 1)
+#define RPI_FIRMWARE_SET_CLOCK_RATE_ERROR		0
+
+static const struct {
+	const char *name;
+	int flags;
+} rpi_clocks[] = {
+	[RPI_CLOCK_EMMC] = { "emmc", CLK_IS_ROOT },
+	[RPI_CLOCK_UART0] = { "uart0", CLK_IS_ROOT },
+	[RPI_CLOCK_ARM] = { "arm", CLK_IS_ROOT | CLK_IGNORE_UNUSED },
+	[RPI_CLOCK_CORE] = { "core", CLK_IS_ROOT | CLK_IGNORE_UNUSED },
+	[RPI_CLOCK_V3D] = { "v3d", CLK_IS_ROOT },
+	[RPI_CLOCK_H264] = { "h264", CLK_IS_ROOT },
+	[RPI_CLOCK_ISP] = { "isp", CLK_IS_ROOT },
+	[RPI_CLOCK_SDRAM] = { "sdram", CLK_IS_ROOT | CLK_IGNORE_UNUSED },
+	[RPI_CLOCK_PIXEL] = { "pixel", CLK_IS_ROOT | CLK_IGNORE_UNUSED },
+	[RPI_CLOCK_PWM] = { "pwm", CLK_IS_ROOT },
+};
+
+struct rpi_firmware_clock {
+	/* Clock definitions in our static struct. */
+	const char *name;
+	int flags;
+
+	/* The rest are filled in at init time. */
+	struct clk_hw hw;
+	struct device *dev;
+	struct rpi_firmware *firmware;
+	uint32_t last_rate;
+	int id;
+};
+
+static int rpi_clk_is_on(struct clk_hw *hw)
+{
+	struct rpi_firmware_clock *rpi_clk =
+		container_of(hw, struct rpi_firmware_clock, hw);
+	u32 packet[2];
+	int ret;
+
+	packet[0] = rpi_clk->id;
+	packet[1] = 0;
+	ret = rpi_firmware_property(rpi_clk->firmware,
+				    RPI_FIRMWARE_GET_CLOCK_STATE,
+				    &packet, sizeof(packet));
+	/*
+	 * The second packet field has the new clock state returned in
+	 * the low bit, or an error flag in the second bit.
+	 */
+	if (ret || (packet[1] & RPI_FIRMWARE_CLOCK_STATE_ERROR)) {
+		dev_err(rpi_clk->dev, "Failed to get clock state\n");
+		return ret ? ret : -EINVAL;
+	}
+
+	return packet[1] & RPI_FIRMWARE_CLOCK_STATE_ENABLED;
+}
+
+static int rpi_clk_set_state(struct clk_hw *hw, bool on)
+{
+	struct rpi_firmware_clock *rpi_clk =
+		container_of(hw, struct rpi_firmware_clock, hw);
+	u32 packet[2];
+	int ret;
+
+	if (on == (rpi_clk->last_rate != 0))
+		return 0;
+
+	packet[0] = rpi_clk->id;
+	packet[1] = on;
+	ret = rpi_firmware_property(rpi_clk->firmware,
+				    RPI_FIRMWARE_SET_CLOCK_STATE,
+				    &packet, sizeof(packet));
+	/*
+	 * The second packet field has the new clock state returned in
+	 * the low bit, or an error flag in the second bit.
+	 */
+	if (ret || (packet[1] & RPI_FIRMWARE_CLOCK_STATE_ERROR)) {
+		dev_err(rpi_clk->dev, "Failed to set clock state\n");
+		return ret ? ret : -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rpi_clk_on(struct clk_hw *hw)
+{
+	return rpi_clk_set_state(hw, true);
+}
+
+static void rpi_clk_off(struct clk_hw *hw)
+{
+	rpi_clk_set_state(hw, false);
+}
+
+static unsigned long rpi_clk_get_rate(struct clk_hw *hw,
+				      unsigned long parent_rate)
+{
+	struct rpi_firmware_clock *rpi_clk =
+		container_of(hw, struct rpi_firmware_clock, hw);
+	u32 packet[2];
+	int ret;
+
+	packet[0] = rpi_clk->id;
+	packet[1] = 0;
+	ret = rpi_firmware_property(rpi_clk->firmware,
+				    RPI_FIRMWARE_GET_CLOCK_RATE,
+				    &packet, sizeof(packet));
+	/*
+	 * Note that the second packet field returns 0 on an unknown
+	 * clock error, which would also be a reasonable value for a
+	 * clock that's off.
+	 */
+	if (ret) {
+		dev_err(rpi_clk->dev, "Failed to get clock rate\n");
+		return 0;
+	}
+
+	rpi_clk->last_rate = packet[1];
+
+	return packet[1];
+}
+
+static int rpi_clk_set_rate(struct clk_hw *hw,
+			    unsigned long rate, unsigned long parent_rate)
+{
+	struct rpi_firmware_clock *rpi_clk =
+		container_of(hw, struct rpi_firmware_clock, hw);
+	u32 packet[2];
+	int ret;
+
+	if (rate == rpi_clk->last_rate)
+		return 0;
+
+	packet[0] = rpi_clk->id;
+	packet[1] = rate;
+	ret = rpi_firmware_property(rpi_clk->firmware,
+				    RPI_FIRMWARE_SET_CLOCK_RATE,
+				    &packet, sizeof(packet));
+	/*
+	 * The second packet field has the new clock rate returned, or
+	 * 0 on error.
+	 */
+	if (ret || packet[1] == RPI_FIRMWARE_SET_CLOCK_RATE_ERROR) {
+		dev_err(rpi_clk->dev, "Failed to set clock rate\n");
+		return ret;
+	}
+
+	rpi_clk->last_rate = packet[1];
+
+	return 0;
+}
+
+static long rpi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	/*
+	 * The firmware will end up rounding our rate to something,
+	 * but we don't have an interface for it.  Just return the
+	 * requested value, and it'll get updated after the clock gets
+	 * set.
+	 */
+	return rate;
+}
+
+static struct clk_ops rpi_clk_ops = {
+	.is_prepared = rpi_clk_is_on,
+	.prepare = rpi_clk_on,
+	.unprepare = rpi_clk_off,
+	.recalc_rate = rpi_clk_get_rate,
+	.set_rate = rpi_clk_set_rate,
+	.round_rate = rpi_clk_round_rate,
+};
+
+static int rpi_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *firmware_node;
+	struct rpi_firmware *firmware;
+	struct clk_init_data init;
+	int i;
+	struct clk_onecell_data *onecell;
+
+	firmware_node = of_parse_phandle(dev->of_node,
+					 "raspberrypi,firmware", 0);
+	if (!firmware_node) {
+		dev_err(dev, "Missing firmware node\n");
+		return -ENODEV;
+	}
+	firmware = rpi_firmware_get(firmware_node);
+	if (!firmware)
+		return -EPROBE_DEFER;
+
+	onecell = devm_kmalloc(dev, sizeof(*onecell), GFP_KERNEL);
+	if (!onecell)
+		return -ENOMEM;
+	onecell->clk_num = ARRAY_SIZE(rpi_clocks);
+	onecell->clks = devm_kzalloc(dev, sizeof(*onecell->clks), GFP_KERNEL);
+	if (!onecell->clks)
+		return -ENOMEM;
+
+	memset(&init, 0, sizeof(init));
+	init.ops = &rpi_clk_ops;
+
+	for (i = 0; i < ARRAY_SIZE(rpi_clocks); i++) {
+		struct rpi_firmware_clock *rpi_clk;
+
+		if (!rpi_clocks[i].name)
+			continue;
+
+		rpi_clk = devm_kzalloc(dev, sizeof(*rpi_clk), GFP_KERNEL);
+		if (!rpi_clk)
+			return -ENOMEM;
+
+		rpi_clk->name = rpi_clocks[i].name;
+		rpi_clk->firmware = firmware;
+		rpi_clk->dev = dev;
+		rpi_clk->hw.init = &init;
+		rpi_clk->id = i;
+		init.name = rpi_clocks[i].name;
+		init.flags = rpi_clocks[i].flags;
+
+		onecell->clks[i] = devm_clk_register(&pdev->dev, &rpi_clk->hw);
+		if (IS_ERR(onecell->clks[i]))
+			return PTR_ERR(onecell->clks[i]);
+
+		/* Get the current clock rate/state, to avoid extra on
+		 * to on transitions at boot.
+		 */
+		rpi_clk_get_rate(&rpi_clk->hw, 0);
+	}
+
+	return of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
+				   onecell);
+}
+
+static int rpi_clk_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+
+	return 0;
+}
+
+static const struct of_device_id rpi_clk_of_match[] = {
+	{ .compatible = "raspberrypi,bcm2835-firmware-clocks", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rpi_clk_of_match);
+
+static struct platform_driver rpi_clk_driver = {
+	.driver = {
+		.name = "raspberrypi-clk",
+		.of_match_table = rpi_clk_of_match,
+	},
+	.probe		= rpi_clk_probe,
+	.remove		= rpi_clk_remove,
+};
+module_platform_driver(rpi_clk_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@...olt.net>");
+MODULE_DESCRIPTION("Raspberry Pi clock driver");
+MODULE_LICENSE("GPL v2");
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists