| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 14 Aug 2015 21:44:32 -0700
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] SCSI fixes for 4.2-rc6
This patch consists of 2 libfc fixes causing rare crashes, one iscsi one
causing a potential hang on shutdown, an I/O blocksize issue which
caused a regression and a memory leak in scsi-mq.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Bart Van Assche (2):
libfc: Fix fc_fcp_cleanup_each_cmd()
libfc: Fix fc_exch_recv_req() error path
John Soni Jose (1):
libiscsi: Fix host busy blocking during connection teardown
Martin K. Petersen (1):
sd: Fix maximum I/O size for BLOCK_PC requests
Tony Battersby (1):
scsi: fix memory leak with scsi-mq
And the diffstat:
block/blk-settings.c | 4 ++--
drivers/scsi/libfc/fc_exch.c | 8 ++++----
drivers/scsi/libfc/fc_fcp.c | 19 +++++++++++++++++--
drivers/scsi/libiscsi.c | 25 ++-----------------------
drivers/scsi/scsi_error.c | 2 +-
drivers/scsi/scsi_lib.c | 6 +++---
drivers/scsi/sd.c | 6 +++---
7 files changed, 32 insertions(+), 38 deletions(-)
With full diff below.
James
---
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 12600bf..e0057d0 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -241,8 +241,8 @@ EXPORT_SYMBOL(blk_queue_bounce_limit);
* Description:
* Enables a low level driver to set a hard upper limit,
* max_hw_sectors, on the size of requests. max_hw_sectors is set by
- * the device driver based upon the combined capabilities of I/O
- * controller and storage device.
+ * the device driver based upon the capabilities of the I/O
+ * controller.
*
* max_sectors is a soft limit imposed by the block layer for
* filesystem type requests. This value can be overridden on a
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 1b3a094..30f9ef0 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -733,8 +733,6 @@ static bool fc_invoke_resp(struct fc_exch *ep, struct fc_seq *sp,
if (resp) {
resp(sp, fp, arg);
res = true;
- } else if (!IS_ERR(fp)) {
- fc_frame_free(fp);
}
spin_lock_bh(&ep->ex_lock);
@@ -1596,7 +1594,8 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
* If new exch resp handler is valid then call that
* first.
*/
- fc_invoke_resp(ep, sp, fp);
+ if (!fc_invoke_resp(ep, sp, fp))
+ fc_frame_free(fp);
fc_exch_release(ep);
return;
@@ -1695,7 +1694,8 @@ static void fc_exch_abts_resp(struct fc_exch *ep, struct fc_frame *fp)
fc_exch_hold(ep);
if (!rc)
fc_exch_delete(ep);
- fc_invoke_resp(ep, sp, fp);
+ if (!fc_invoke_resp(ep, sp, fp))
+ fc_frame_free(fp);
if (has_rec)
fc_exch_timer_set(ep, ep->r_a_tov);
fc_exch_release(ep);
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index c679594..2d5909c 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1039,11 +1039,26 @@ restart:
fc_fcp_pkt_hold(fsp);
spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
- if (!fc_fcp_lock_pkt(fsp)) {
+ spin_lock_bh(&fsp->scsi_pkt_lock);
+ if (!(fsp->state & FC_SRB_COMPL)) {
+ fsp->state |= FC_SRB_COMPL;
+ /*
+ * TODO: dropping scsi_pkt_lock and then reacquiring
+ * again around fc_fcp_cleanup_cmd() is required,
+ * since fc_fcp_cleanup_cmd() calls into
+ * fc_seq_set_resp() and that func preempts cpu using
+ * schedule. May be schedule and related code should be
+ * removed instead of unlocking here to avoid scheduling
+ * while atomic bug.
+ */
+ spin_unlock_bh(&fsp->scsi_pkt_lock);
+
fc_fcp_cleanup_cmd(fsp, error);
+
+ spin_lock_bh(&fsp->scsi_pkt_lock);
fc_io_compl(fsp);
- fc_fcp_unlock_pkt(fsp);
}
+ spin_unlock_bh(&fsp->scsi_pkt_lock);
fc_fcp_pkt_release(fsp);
spin_lock_irqsave(&si->scsi_queue_lock, flags);
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 8053f24..98d9bb6 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2941,10 +2941,10 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
- unsigned long flags;
del_timer_sync(&conn->transport_timer);
+ mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->frwd_lock);
conn->c_stage = ISCSI_CONN_CLEANUP_WAIT;
if (session->leadconn == conn) {
@@ -2956,28 +2956,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
}
spin_unlock_bh(&session->frwd_lock);
- /*
- * Block until all in-progress commands for this connection
- * time out or fail.
- */
- for (;;) {
- spin_lock_irqsave(session->host->host_lock, flags);
- if (!atomic_read(&session->host->host_busy)) { /* OK for ERL == 0 */
- spin_unlock_irqrestore(session->host->host_lock, flags);
- break;
- }
- spin_unlock_irqrestore(session->host->host_lock, flags);
- msleep_interruptible(500);
- iscsi_conn_printk(KERN_INFO, conn, "iscsi conn_destroy(): "
- "host_busy %d host_failed %d\n",
- atomic_read(&session->host->host_busy),
- session->host->host_failed);
- /*
- * force eh_abort() to unblock
- */
- wake_up(&conn->ehwait);
- }
-
/* flush queued up work because we free the connection below */
iscsi_suspend_tx(conn);
@@ -2994,6 +2972,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
if (session->leadconn == conn)
session->leadconn = NULL;
spin_unlock_bh(&session->frwd_lock);
+ mutex_unlock(&session->eh_mutex);
iscsi_destroy_conn(cls_conn);
}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 106884a..cfadcce 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -944,7 +944,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
scmd->sdb.length);
scmd->sdb.table.sgl = &ses->sense_sgl;
scmd->sc_data_direction = DMA_FROM_DEVICE;
- scmd->sdb.table.nents = 1;
+ scmd->sdb.table.nents = scmd->sdb.table.orig_nents = 1;
scmd->cmnd[0] = REQUEST_SENSE;
scmd->cmnd[4] = scmd->sdb.length;
scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index b1a2631..448ebda 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -583,7 +583,7 @@ static struct scatterlist *scsi_sg_alloc(unsigned int nents, gfp_t gfp_mask)
static void scsi_free_sgtable(struct scsi_data_buffer *sdb, bool mq)
{
- if (mq && sdb->table.nents <= SCSI_MAX_SG_SEGMENTS)
+ if (mq && sdb->table.orig_nents <= SCSI_MAX_SG_SEGMENTS)
return;
__sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, mq, scsi_sg_free);
}
@@ -597,8 +597,8 @@ static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents, bool mq)
if (mq) {
if (nents <= SCSI_MAX_SG_SEGMENTS) {
- sdb->table.nents = nents;
- sg_init_table(sdb->table.sgl, sdb->table.nents);
+ sdb->table.nents = sdb->table.orig_nents = nents;
+ sg_init_table(sdb->table.sgl, nents);
return 0;
}
first_chunk = sdb->table.sgl;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3b2fcb4..a20da8c 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2770,9 +2770,9 @@ static int sd_revalidate_disk(struct gendisk *disk)
max_xfer = sdkp->max_xfer_blocks;
max_xfer <<= ilog2(sdp->sector_size) - 9;
- max_xfer = min_not_zero(queue_max_hw_sectors(sdkp->disk->queue),
- max_xfer);
- blk_queue_max_hw_sectors(sdkp->disk->queue, max_xfer);
+ sdkp->disk->queue->limits.max_sectors =
+ min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer);
+
set_capacity(disk, sdkp->capacity);
sd_config_write_same(sdkp);
kfree(buffer);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists