[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <3c955492a58fe4ed9a36b2490aca8d7c09e3e6e9.1439688440.git.raphael.beamonte@gmail.com>
Date: Sat, 15 Aug 2015 21:34:13 -0400
From: Raphaël Beamonte <raphael.beamonte@...il.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Raphaël Beamonte <raphael.beamonte@...il.com>,
Antoine Schweitzer-Chaput <antoine@...weitzer-chaput.fr>,
Cristina Opriceana <cristina.opriceana@...il.com>,
Greg Donald <gdonald@...il.com>, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 17/20] staging: rtl8192u: r8192U_core: fix missing blank line after declarations code style issue
Signed-off-by: Raphaël Beamonte <raphael.beamonte@...il.com>
---
drivers/staging/rtl8192u/r8192U_core.c | 44 +++++++++++++++++++++++++++++++---
1 file changed, 41 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 5aae096..511e979 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -160,6 +160,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv)
{
int i, max_chan = -1, min_chan = -1;
struct ieee80211_device *ieee = priv->ieee80211;
+
switch (channel_plan) {
case COUNTRY_CODE_FCC:
case COUNTRY_CODE_IC:
@@ -428,6 +429,7 @@ static int proc_get_stats_ap(struct seq_file *m, void *v)
list_for_each_entry(target, &ieee->network_list, list) {
const char *wpa = "non_WPA";
+
if (target->wpa_ie_len > 0 || target->rsn_ie_len > 0)
wpa = "WPA";
@@ -674,6 +676,7 @@ void rtl8192_update_msr(struct net_device *dev)
void rtl8192_set_chan(struct net_device *dev, short ch)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __func__, ch);
priv->chan = ch;
@@ -879,8 +882,10 @@ static void rtl8192_rx_isr(struct urb *urb)
struct r8192_priv *priv = ieee80211_priv(dev);
int out_pipe = info->out_pipe;
int err;
+
if (!priv->up)
return;
+
if (unlikely(urb->status)) {
info->urb = NULL;
priv->stats.rxstaterr++;
@@ -1058,6 +1063,7 @@ static void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
struct r8192_priv *priv = ieee80211_priv(dev);
struct ieee80211_network *net;
u8 i = 0, basic_rate = 0;
+
net = &priv->ieee80211->current_network;
for (i = 0; i < net->rates_len; i++) {
@@ -1153,6 +1159,7 @@ static void rtl8192_update_cap(struct net_device *dev, u16 cap)
u32 tmp = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
struct ieee80211_network *net = &priv->ieee80211->current_network;
+
priv->short_preamble = cap & WLAN_CAPABILITY_SHORT_PREAMBLE;
tmp = priv->basic_rate;
if (priv->short_preamble)
@@ -1161,6 +1168,7 @@ static void rtl8192_update_cap(struct net_device *dev, u16 cap)
if (net->mode & (IEEE_G | IEEE_N_24G)) {
u8 slot_time = 0;
+
if ((cap & WLAN_CAPABILITY_SHORT_SLOT) && (!priv->ieee80211->pHTInfo->bCurrentRT2RTLongSlotTime)) /* short slot time */
slot_time = SHORT_SLOT_TIME;
else /* long slot time */
@@ -1177,6 +1185,7 @@ static void rtl8192_net_update(struct net_device *dev)
struct ieee80211_network *net;
u16 BcnTimeCfg = 0, BcnCW = 6, BcnIFS = 0xf;
u16 rate_config = 0;
+
net = &priv->ieee80211->current_network;
rtl8192_config_rate(dev, &rate_config);
@@ -1490,6 +1499,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
int status;
struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
unsigned int idx_pipe;
+
pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]);
/* we are locked here so the two atomic_read and inc are executed
* without interleaves
@@ -1616,6 +1626,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
*/
bool bSend0Byte = false;
u8 zero = 0;
+
if (udev->speed == USB_SPEED_HIGH) {
if (skb->len > 0 && skb->len % 512 == 0)
bSend0Byte = true;
@@ -1761,6 +1772,7 @@ static void rtl8192_link_change(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
+
if (ieee->state == IEEE80211_LINKED) {
rtl8192_net_update(dev);
rtl8192_update_ratr_table(dev);
@@ -1774,6 +1786,7 @@ static void rtl8192_link_change(struct net_device *dev)
/*update timing params*/
if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) {
u32 reg = 0;
+
read_nic_dword(dev, RCR, ®);
if (priv->ieee80211->state == IEEE80211_LINKED)
priv->ReceiveConfig = reg |= RCR_CBSSID;
@@ -1959,6 +1972,7 @@ static int rtl8192_handle_assoc_response(struct net_device *dev,
struct ieee80211_network *network)
{
struct r8192_priv *priv = ieee80211_priv(dev);
+
rtl8192_qos_association_resp(priv, network);
return 0;
}
@@ -1971,6 +1985,7 @@ static void rtl8192_update_ratr_table(struct net_device *dev)
u8 *pMcsRate = ieee->dot11HTOperationalRateSet;
u32 ratr_value = 0;
u8 rate_index = 0;
+
rtl8192_config_rate(dev, (u16 *)(&ratr_value));
ratr_value |= (*(u16 *)(pMcsRate)) << 12;
switch (ieee->mode) {
@@ -2063,6 +2078,7 @@ static u8 rtl8192_getSupportedWireleeMode(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 ret = 0;
+
switch (priv->rf_chip) {
case RF_8225:
case RF_8256:
@@ -2117,6 +2133,7 @@ static void rtl8192_init_priv_variable(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 i;
+
priv->card_8192 = NIC_8192U;
priv->chan = 1; /* set to channel 1 */
priv->ieee80211->mode = WIRELESS_MODE_AUTO; /* SET AUTO */
@@ -2263,6 +2280,7 @@ static void rtl8192_get_eeprom_size(struct net_device *dev)
{
u16 curCR = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
+
RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__);
read_nic_word_E(dev, EPROM_CMD, &curCR);
RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR);
@@ -2288,6 +2306,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u16 tmpValue = 0;
int i;
+
RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__);
wEPROM_ID = eprom_read(dev, 0); /* first read EEPROM ID out; */
RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID);
@@ -2317,8 +2336,10 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
priv->ChannelPlan = priv->eeprom_ChannelPlan;
if (bLoad_From_EEPOM) {
int i;
+
for (i = 0; i < 6; i += 2) {
u16 tmp = 0;
+
tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i) >> 1));
*(u16 *)(&dev->dev_addr[i]) = tmp;
}
@@ -2365,6 +2386,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
if (priv->EEPROM_Def_Ver == 0) { /* old eeprom definition */
int i;
+
if (bLoad_From_EEPOM)
priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK >> 1)) & 0xff) >> 8;
else
@@ -2499,6 +2521,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
static short rtl8192_get_channel_map(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
+
if (priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN) {
netdev_err(dev, "rtl8180_init: Error channel plan! Set to default.\n");
priv->ChannelPlan = 0;
@@ -2520,11 +2543,13 @@ static short rtl8192_init(struct net_device *dev)
{
int i = 0;
u8 queuetopipe[] = {3, 2, 1, 0, 4, 8, 7, 6, 5};
+
memcpy(priv->txqueue_to_outpipemap, queuetopipe, 9);
}
#else
{
u8 queuetopipe[] = {3, 2, 1, 0, 4, 4, 0, 4, 4};
+
memcpy(priv->txqueue_to_outpipemap, queuetopipe, 9);
}
#endif
@@ -2640,6 +2665,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
bool init_status = true;
u8 SECR_value = 0x0;
u8 tmp;
+
RT_TRACE(COMP_INIT, "====>%s()\n", __func__);
priv->Rf_Mode = RF_OP_By_SW_3wire;
/* for ASIC power on sequence */
@@ -2730,6 +2756,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
#define DEFAULT_EDCA 0x005e4332
{
int i;
+
for (i = 0; i < QOS_QUEUE_NUM; i++)
write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA);
}
@@ -2800,6 +2827,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
if (priv->ResetProgress == RESET_TYPE_NORESET) {
/* if D or C cut */
u8 tmpvalue;
+
read_nic_byte(dev, 0x301, &tmpvalue);
if (tmpvalue == 0x03) {
priv->bDcut = true;
@@ -2813,6 +2841,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
if (priv->bDcut) {
u32 i, TempCCk;
u32 tmpRegA = rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
+
for (i = 0; i < TxBBGainTableLength; i++) {
if (tmpRegA == priv->txbbgain_table[i].txbbgain_value) {
priv->rfa_txpowertrackingindex = (u8)i;
@@ -2863,6 +2892,7 @@ static bool HalTxCheckStuck819xUsb(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u16 RegTxCounter;
bool bStuck = false;
+
read_nic_word(dev, 0x128, &RegTxCounter);
RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d,TxCounter is %d\n", __func__, RegTxCounter, priv->TxCounter);
if (priv->TxCounter == RegTxCounter)
@@ -2908,6 +2938,7 @@ static bool HalRxCheckStuck819xUsb(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
bool bStuck = false;
static u8 rx_chk_cnt;
+
read_nic_word(dev, 0x130, &RegRxCounter);
RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __func__, RegRxCounter, priv->RxCounter);
/* If rssi is small, we should check rx for long time because of bad rx.
@@ -3271,6 +3302,7 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
static void watch_dog_timer_callback(unsigned long data)
{
struct r8192_priv *priv = ieee80211_priv((struct net_device *)data);
+
queue_delayed_work(priv->priv_wq, &priv->watch_dog_wq, 0);
mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
}
@@ -3278,6 +3310,7 @@ static int _rtl8192_up(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
int init_status = 0;
+
priv->up = 1;
priv->ieee80211->ieee_up = 1;
RT_TRACE(COMP_INIT, "Bringing up iface");
@@ -3306,6 +3339,7 @@ static int rtl8192_open(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
int ret;
+
down(&priv->wx_sem);
ret = rtl8192_up(dev);
up(&priv->wx_sem);
@@ -3386,6 +3420,7 @@ void rtl8192_commit(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
int reset_status = 0;
+
if (priv->up == 0)
return;
priv->up = 0;
@@ -3714,6 +3749,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
struct rtl_80211_hdr_3addr *hdr;
u16 sc;
unsigned int frag, seq;
+
hdr = (struct rtl_80211_hdr_3addr *)buffer;
sc = le16_to_cpu(hdr->seq_ctl);
frag = WLAN_GET_SEQ_FRAG(sc);
@@ -4404,6 +4440,7 @@ static void query_rxdesc_status(struct sk_buff *skb,
/* TODO */
if (!stats->bHwError) {
u8 ret_rate;
+
ret_rate = HwRateToMRate90(driver_info->RxHT, driver_info->RxRate);
if (ret_rate == 0xff) {
/* Abnormal Case: Receive CRC OK packet with Rx
@@ -4642,6 +4679,7 @@ static int rtl8192_usb_probe(struct usb_interface *intf,
struct r8192_priv *priv = NULL;
struct usb_device *udev = interface_to_usbdev(intf);
int ret;
+
RT_TRACE(COMP_INIT, "Oops: i'm coming\n");
dev = alloc_ieee80211(sizeof(struct r8192_priv));
@@ -4716,10 +4754,9 @@ static void rtl8192_cancel_deferred_work(struct r8192_priv *priv)
static void rtl8192_usb_disconnect(struct usb_interface *intf)
{
struct net_device *dev = usb_get_intfdata(intf);
-
struct r8192_priv *priv = ieee80211_priv(dev);
- if (dev) {
+ if (dev) {
unregister_netdev(dev);
RT_TRACE(COMP_DOWN, "=============>wlan driver to be removed\n");
@@ -4731,7 +4768,6 @@ static void rtl8192_usb_disconnect(struct usb_interface *intf)
rtl8192_usb_deleteendpoints(dev);
destroy_workqueue(priv->priv_wq);
mdelay(10);
-
}
free_ieee80211(dev);
RT_TRACE(COMP_DOWN, "wlan driver removed\n");
@@ -4808,6 +4844,7 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
u8 SECR_value = 0x0;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
+
SECR_value = SCR_TxEncEnable | SCR_RxDecEnable;
if (((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type)) && (priv->ieee80211->auth_mode != 2)) {
SECR_value |= SCR_RxUseDK;
@@ -4842,6 +4879,7 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
u32 TargetContent = 0;
u16 usConfig = 0;
u8 i;
+
if (EntryNo >= TOTAL_CAM_ENTRY)
RT_TRACE(COMP_ERR, "cam entry exceeds in setKey()\n");
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists