| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1439792409-28543-2-git-send-email-mpa@pengutronix.de>
Date: Mon, 17 Aug 2015 08:20:00 +0200
From: Markus Pargmann <mpa@...gutronix.de>
To: Jens Axboe <axboe@...nel.dk>
Cc: linux-kernel@...r.kernel.org, nbd-general@...ts.sourceforge.net,
kernel@...gutronix.de, Markus Pargmann <mpa@...gutronix.de>,
Michal Belczyk <belczyk@....krakow.pl>,
Hermann Lauer <Hermann.Lauer@....uni-heidelberg.de>
Subject: [PATCH 01/10] nbd: Fix timeout detection
At the moment the nbd timeout just detects hanging tcp operations. This
is not enough to detect a hanging or bad connection as expected of a
timeout.
This patch redesigns the timeout detection to include some more cases.
The timeout is now in relation to replies from the server. If the server
does not send replies within the timeout the connection will be shut
down.
The patch adds a continous timer 'timeout_timer' that is setup in one of
two cases:
- The request list is empty and we are sending the first request out to
the server. We want to have a reply within the given timeout,
otherwise we consider the connection to be dead.
- A server response was received. This means the server is still
communicating with us. The timer is reset to the timeout value.
The timer is not stopped if the list becomes empty. It will just trigger
a timeout which will directly leave the handling routine again as the
request list is empty.
The whole patch does not use any additional explicit locking. The
list_empty() calls are safe to be used concurrently. The timer is locked
internally as we just use mod_timer and del_timer_sync().
The patch is based on the idea of Michal Belczyk with a previous
different implementation.
Cc: Michal Belczyk <belczyk@....krakow.pl>
Cc: Hermann Lauer <Hermann.Lauer@....uni-heidelberg.de>
Signed-off-by: Markus Pargmann <mpa@...gutronix.de>
Tested-by: Hermann Lauer <Hermann.Lauer@....uni-heidelberg.de>
---
drivers/block/nbd.c | 98 ++++++++++++++++++++++++++++++++++++++---------------
1 file changed, 70 insertions(+), 28 deletions(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 0e385d8e9b86..7b9ae7a65c1e 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -59,6 +59,10 @@ struct nbd_device {
pid_t pid; /* pid of nbd-client, if attached */
int xmit_timeout;
int disconnect; /* a disconnect has been requested by user */
+
+ struct timer_list timeout_timer;
+ struct task_struct *task_recv;
+ struct task_struct *task_send;
};
#define NBD_MAGIC 0x68797548
@@ -121,6 +125,7 @@ static void sock_shutdown(struct nbd_device *nbd, int lock)
dev_warn(disk_to_dev(nbd->disk), "shutting down socket\n");
kernel_sock_shutdown(nbd->sock, SHUT_RDWR);
nbd->sock = NULL;
+ del_timer_sync(&nbd->timeout_timer);
}
if (lock)
mutex_unlock(&nbd->tx_lock);
@@ -128,11 +133,23 @@ static void sock_shutdown(struct nbd_device *nbd, int lock)
static void nbd_xmit_timeout(unsigned long arg)
{
- struct task_struct *task = (struct task_struct *)arg;
+ struct nbd_device *nbd = (struct nbd_device *)arg;
+ struct task_struct *task;
+
+ if (list_empty(&nbd->queue_head))
+ return;
+
+ nbd->disconnect = 1;
+
+ task = READ_ONCE(nbd->task_recv);
+ if (task)
+ force_sig(SIGKILL, task);
- printk(KERN_WARNING "nbd: killing hung xmit (%s, pid: %d)\n",
- task->comm, task->pid);
- force_sig(SIGKILL, task);
+ task = READ_ONCE(nbd->task_send);
+ if (task)
+ force_sig(SIGKILL, nbd->task_send);
+
+ dev_err(nbd_to_dev(nbd), "Connection timed out, killed receiver and sender, shutting down connection\n");
}
/*
@@ -171,33 +188,12 @@ static int sock_xmit(struct nbd_device *nbd, int send, void *buf, int size,
msg.msg_controllen = 0;
msg.msg_flags = msg_flags | MSG_NOSIGNAL;
- if (send) {
- struct timer_list ti;
-
- if (nbd->xmit_timeout) {
- init_timer(&ti);
- ti.function = nbd_xmit_timeout;
- ti.data = (unsigned long)current;
- ti.expires = jiffies + nbd->xmit_timeout;
- add_timer(&ti);
- }
+ if (send)
result = kernel_sendmsg(sock, &msg, &iov, 1, size);
- if (nbd->xmit_timeout)
- del_timer_sync(&ti);
- } else
+ else
result = kernel_recvmsg(sock, &msg, &iov, 1, size,
msg.msg_flags);
- if (signal_pending(current)) {
- siginfo_t info;
- printk(KERN_WARNING "nbd (pid %d: %s) got signal %d\n",
- task_pid_nr(current), current->comm,
- dequeue_signal_lock(current, ¤t->blocked, &info));
- result = -EINTR;
- sock_shutdown(nbd, !send);
- break;
- }
-
if (result <= 0) {
if (result == 0)
result = -EPIPE; /* short read */
@@ -210,6 +206,9 @@ static int sock_xmit(struct nbd_device *nbd, int send, void *buf, int size,
sigprocmask(SIG_SETMASK, &oldset, NULL);
tsk_restore_flags(current, pflags, PF_MEMALLOC);
+ if (!send && nbd->xmit_timeout)
+ mod_timer(&nbd->timeout_timer, jiffies + nbd->xmit_timeout);
+
return result;
}
@@ -415,12 +414,26 @@ static int nbd_do_it(struct nbd_device *nbd)
return ret;
}
+ nbd->task_recv = current;
+
while ((req = nbd_read_stat(nbd)) != NULL)
nbd_end_request(nbd, req);
+ nbd->task_recv = NULL;
+
+ if (signal_pending(current)) {
+ siginfo_t info;
+
+ ret = dequeue_signal_lock(current, ¤t->blocked, &info);
+ dev_warn(nbd_to_dev(nbd), "pid %d, %s, got signal %d\n",
+ task_pid_nr(current), current->comm, ret);
+ sock_shutdown(nbd, 1);
+ ret = -ETIMEDOUT;
+ }
+
device_remove_file(disk_to_dev(nbd->disk), &pid_attr);
nbd->pid = 0;
- return 0;
+ return ret;
}
static void nbd_clear_que(struct nbd_device *nbd)
@@ -482,6 +495,9 @@ static void nbd_handle_req(struct nbd_device *nbd, struct request *req)
nbd->active_req = req;
+ if (nbd->xmit_timeout && list_empty_careful(&nbd->queue_head))
+ mod_timer(&nbd->timeout_timer, jiffies + nbd->xmit_timeout);
+
if (nbd_send_req(nbd, req) != 0) {
dev_err(disk_to_dev(nbd->disk), "Request send failed\n");
req->errors++;
@@ -508,6 +524,8 @@ static int nbd_thread(void *data)
struct nbd_device *nbd = data;
struct request *req;
+ nbd->task_send = current;
+
set_user_nice(current, MIN_NICE);
while (!kthread_should_stop() || !list_empty(&nbd->waiting_queue)) {
/* wait for something to do */
@@ -515,6 +533,18 @@ static int nbd_thread(void *data)
kthread_should_stop() ||
!list_empty(&nbd->waiting_queue));
+ if (signal_pending(current)) {
+ siginfo_t info;
+ int ret;
+
+ ret = dequeue_signal_lock(current, ¤t->blocked,
+ &info);
+ dev_warn(nbd_to_dev(nbd), "pid %d, %s, got signal %d\n",
+ task_pid_nr(current), current->comm, ret);
+ sock_shutdown(nbd, 1);
+ break;
+ }
+
/* extract request */
if (list_empty(&nbd->waiting_queue))
continue;
@@ -528,6 +558,9 @@ static int nbd_thread(void *data)
/* handle request */
nbd_handle_req(nbd, req);
}
+
+ nbd->task_send = NULL;
+
return 0;
}
@@ -648,6 +681,12 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd,
case NBD_SET_TIMEOUT:
nbd->xmit_timeout = arg * HZ;
+ if (arg)
+ mod_timer(&nbd->timeout_timer,
+ jiffies + nbd->xmit_timeout);
+ else
+ del_timer_sync(&nbd->timeout_timer);
+
return 0;
case NBD_SET_FLAGS:
@@ -842,6 +881,9 @@ static int __init nbd_init(void)
spin_lock_init(&nbd_dev[i].queue_lock);
INIT_LIST_HEAD(&nbd_dev[i].queue_head);
mutex_init(&nbd_dev[i].tx_lock);
+ init_timer(&nbd_dev[i].timeout_timer);
+ nbd_dev[i].timeout_timer.function = nbd_xmit_timeout;
+ nbd_dev[i].timeout_timer.data = (unsigned long)&nbd_dev[i];
init_waitqueue_head(&nbd_dev[i].active_wq);
init_waitqueue_head(&nbd_dev[i].waiting_wq);
nbd_dev[i].blksize = 1024;
--
2.4.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists