| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150817075944.GL19600@pengutronix.de>
Date: Mon, 17 Aug 2015 09:59:44 +0200
From: Markus Pargmann <mpa@...gutronix.de>
To: Jonathan Cameron <jic23@...nel.org>
Cc: Mark Brown <broonie@...nel.org>,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, kernel@...gutronix.de
Subject: Re: [PATCH 19/20] iio: bmc150: Split the driver into core and i2c
On Sat, Aug 15, 2015 at 02:41:29PM +0100, Jonathan Cameron wrote:
> On 12/08/15 11:12, Markus Pargmann wrote:
> > Signed-off-by: Markus Pargmann <mpa@...gutronix.de>
> There are a few bits in here following through from earlier
> patches that I haven't bothered mentioning as you'll have fixed
> them already before this split patch).
>
> Two more bits inline. Nothing major though.
>
> Jonathan
> > ---
> > drivers/iio/accel/Kconfig | 22 +++--
> > drivers/iio/accel/Makefile | 3 +-
> > .../accel/{bmc150-accel.c => bmc150-accel-core.c} | 95 ++++---------------
> > drivers/iio/accel/bmc150-accel-i2c.c | 101 +++++++++++++++++++++
> > drivers/iio/accel/bmc150-accel.h | 21 +++++
> > 5 files changed, 156 insertions(+), 86 deletions(-)
> > rename drivers/iio/accel/{bmc150-accel.c => bmc150-accel-core.c} (95%)
> > create mode 100644 drivers/iio/accel/bmc150-accel-i2c.c
> > create mode 100644 drivers/iio/accel/bmc150-accel.h
> >
> > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> > index 01dd03d194d1..c63e981c38ff 100644
> > --- a/drivers/iio/accel/Kconfig
> > +++ b/drivers/iio/accel/Kconfig
> > @@ -18,22 +18,30 @@ config BMA180
> > module will be called bma180.
> >
> > config BMC150_ACCEL
> > - tristate "Bosch BMC150 Accelerometer Driver"
> > - depends on I2C
> > - select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > + bool "Bosch BMC150 Accelerometer Driver"
> > select REGMAP
> > - select REGMAP_I2C
> > help
> > Say yes here to build support for the following Bosch accelerometers:
> > BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
> >
> > - Currently this only supports the device via an i2c interface.
> > -
> > This is a combo module with both accelerometer and magnetometer.
> > This driver is only implementing accelerometer part, which has
> > its own address and register map.
> This approach does lead to a proliferation of complexity (to the
> person configuring the kernel build). I prefer the approach the
> ST accel driver for example takes, in which the SPI or I2C drivers
> are built depending on whether the relevant dependencies are present
> and the core driver is selected.
Yes. I will fix this the same way as the other series (bmg160).
> >
> > +if BMC150_ACCEL
> > +
> > +config BMC150_ACCEL_I2C
> > + tristate "I2C support"
> > + depends on I2C
> > + select IIO_BUFFER
> > + select IIO_TRIGGERED_BUFFER
> > + select REGMAP_I2C
> > + help
> > + Say yes here to build support for I2C communication with the
> > + mentioned accelerometer.
> > +
> > +endif
> > +
> > config HID_SENSOR_ACCEL_3D
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> > index ebd2675b2a02..5ef8bdbad092 100644
> > --- a/drivers/iio/accel/Makefile
> > +++ b/drivers/iio/accel/Makefile
> > @@ -4,7 +4,8 @@
> >
> > # When adding new entries keep the list in alphabetical order
> > obj-$(CONFIG_BMA180) += bma180.o
> > -obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel.o
> > +obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
> > +obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
> > obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
> > obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
> > obj-$(CONFIG_KXSD9) += kxsd9.o
> > diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel-core.c
> > similarity index 95%
> > rename from drivers/iio/accel/bmc150-accel.c
> > rename to drivers/iio/accel/bmc150-accel-core.c
> > index d75e1b0aa7e9..8cf2786dd433 100644
> > --- a/drivers/iio/accel/bmc150-accel.c
> > +++ b/drivers/iio/accel/bmc150-accel-core.c
> > @@ -37,6 +37,8 @@
> > #include <linux/iio/triggered_buffer.h>
> > #include <linux/regmap.h>
> >
> > +#include "bmc150-accel.h"
> > +
> > #define BMC150_ACCEL_DRV_NAME "bmc150_accel"
> > #define BMC150_ACCEL_IRQ_NAME "bmc150_accel_event"
> > #define BMC150_ACCEL_GPIO_NAME "bmc150_accel_int"
> > @@ -187,7 +189,6 @@ enum bmc150_accel_trigger_id {
> > struct bmc150_accel_data {
> > struct regmap *regmap;
> > struct device *dev;
> At least from how diff is listing it, looks like you've just
> moved this down the struct? Why?
No reason, will fix it.
Thanks,
Markus
> > - int irq;
> > struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
> > atomic_t active_intr;
> > struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
> > @@ -201,6 +202,7 @@ struct bmc150_accel_data {
> > int ev_enable_state;
> > int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
> > const struct bmc150_accel_chip_info *chip_info;
> > + int irq;
> > };
> >
> > static const struct {
> > @@ -1076,15 +1078,6 @@ static const struct iio_chan_spec bmc150_accel_channels[] =
> > static const struct iio_chan_spec bma280_accel_channels[] =
> > BMC150_ACCEL_CHANNELS(14);
> >
> > -enum {
> > - bmc150,
> > - bmi055,
> > - bma255,
> > - bma250e,
> > - bma222e,
> > - bma280,
> > -};
> > -
> > static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
> > [bmc150] = {
> > .chip_id = 0xFA,
> > @@ -1573,36 +1566,22 @@ static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = {
> > .postdisable = bmc150_accel_buffer_postdisable,
> > };
> >
> > -static int bmc150_accel_probe(struct i2c_client *client,
> > - const struct i2c_device_id *id)
> > +int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
> > + const char *name, int chip_id, bool block_supported)
> > {
> > struct bmc150_accel_data *data;
> > struct iio_dev *indio_dev;
> > int ret;
> > - const char *name = NULL;
> > - int chip_id = 0;
> > - struct device *dev;
> >
> > - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> > + indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> > if (!indio_dev)
> > return -ENOMEM;
> >
> > data = iio_priv(indio_dev);
> > - i2c_set_clientdata(client, indio_dev);
> > - data->dev = &client->dev;
> > - dev = &client->dev;
> > - data->irq = client->irq;
> > -
> > - data->regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf);
> > - if (IS_ERR(data->regmap)) {
> > - dev_err(dev, "Failed to initialize i2c regmap\n");
> > - return PTR_ERR(data->regmap);
> > - }
> > -
> > - if (id) {
> > - name = id->name;
> > - chip_id = id->driver_data;
> > - }
> > + dev_set_drvdata(dev, indio_dev);
> > + data->dev = dev;
> > + data->irq = irq;
> > + data->regmap = regmap;
> >
> > if (ACPI_HANDLE(dev))
> > name = bmc150_accel_match_acpi_device(dev, &chip_id);
> > @@ -1664,9 +1643,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
> > if (ret)
> > goto err_buffer_cleanup;
> >
> > - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
> > - i2c_check_functionality(client->adapter,
> > - I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
> > + if (block_supported) {
> > indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
> > indio_dev->info = &bmc150_accel_info_fifo;
> > indio_dev->buffer->attrs = bmc150_accel_fifo_attributes;
> > @@ -1675,7 +1652,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
> >
> > ret = iio_device_register(indio_dev);
> > if (ret < 0) {
> > - dev_err(data->dev, "Unable to register iio device\n");
> > + dev_err(dev, "Unable to register iio device\n");
> > goto err_trigger_unregister;
> > }
> >
> > @@ -1698,10 +1675,11 @@ err_buffer_cleanup:
> >
> > return ret;
> > }
> > +EXPORT_SYMBOL_GPL(bmc150_accel_core_probe);
> >
> > -static int bmc150_accel_remove(struct i2c_client *client)
> > +int bmc150_accel_core_remove(struct device *dev)
> > {
> > - struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > struct bmc150_accel_data *data = iio_priv(indio_dev);
> >
> > pm_runtime_disable(data->dev);
> > @@ -1720,6 +1698,7 @@ static int bmc150_accel_remove(struct i2c_client *client)
> >
> > return 0;
> > }
> > +EXPORT_SYMBOL_GPL(bmc150_accel_core_remove);
> >
> > #ifdef CONFIG_PM_SLEEP
> > static int bmc150_accel_suspend(struct device *dev)
> > @@ -1790,48 +1769,8 @@ static int bmc150_accel_runtime_resume(struct device *dev)
> > }
> > #endif
> >
> > -static const struct dev_pm_ops bmc150_accel_pm_ops = {
> > +const struct dev_pm_ops bmc150_accel_pm_ops = {
> > SET_SYSTEM_SLEEP_PM_OPS(bmc150_accel_suspend, bmc150_accel_resume)
> > SET_RUNTIME_PM_OPS(bmc150_accel_runtime_suspend,
> > bmc150_accel_runtime_resume, NULL)
> > };
> > -
> > -static const struct acpi_device_id bmc150_accel_acpi_match[] = {
> > - {"BSBA0150", bmc150},
> > - {"BMC150A", bmc150},
> > - {"BMI055A", bmi055},
> > - {"BMA0255", bma255},
> > - {"BMA250E", bma250e},
> > - {"BMA222E", bma222e},
> > - {"BMA0280", bma280},
> > - { },
> > -};
> > -MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
> > -
> > -static const struct i2c_device_id bmc150_accel_id[] = {
> > - {"bmc150_accel", bmc150},
> > - {"bmi055_accel", bmi055},
> > - {"bma255", bma255},
> > - {"bma250e", bma250e},
> > - {"bma222e", bma222e},
> > - {"bma280", bma280},
> > - {}
> > -};
> > -
> > -MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
> > -
> > -static struct i2c_driver bmc150_accel_driver = {
> > - .driver = {
> > - .name = BMC150_ACCEL_DRV_NAME,
> > - .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
> > - .pm = &bmc150_accel_pm_ops,
> > - },
> > - .probe = bmc150_accel_probe,
> > - .remove = bmc150_accel_remove,
> > - .id_table = bmc150_accel_id,
> > -};
> > -module_i2c_driver(bmc150_accel_driver);
> > -
> > -MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>");
> > -MODULE_LICENSE("GPL v2");
> > -MODULE_DESCRIPTION("BMC150 accelerometer driver");
> > diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
> > new file mode 100644
> > index 000000000000..7e036e2eb077
> > --- /dev/null
> > +++ b/drivers/iio/accel/bmc150-accel-i2c.c
> > @@ -0,0 +1,101 @@
> > +/*
> > + * 3-axis accelerometer driver supporting following I2C Bosch-Sensortec chips:
> > + * - BMC150
> > + * - BMI055
> > + * - BMA255
> > + * - BMA250E
> > + * - BMA222E
> > + * - BMA280
> > + *
> > + * Copyright (c) 2014, Intel Corporation.
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> > + * more details.
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/acpi.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "bmc150-accel.h"
> > +
> > +static const struct regmap_config bmc150_i2c_regmap_conf = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +
> > + .use_single_rw = true,
> > + .cache_type = REGCACHE_NONE,
> > +};
> > +
> > +static int bmc150_accel_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + struct regmap *regmap;
> > + bool block_supported =
> > + i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
> > + i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK);
> > +
> > + regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf);
> > + if (IS_ERR(regmap)) {
> > + dev_err(&client->dev, "Failed to initialize i2c regmap\n");
> > + return PTR_ERR(regmap);
> > + }
> > +
> > + return bmc150_accel_core_probe(&client->dev, regmap, client->irq,
> > + id->name, id->driver_data,
> > + block_supported);
> > +}
> > +
> > +static int bmc150_accel_remove(struct i2c_client *client)
> > +{
> > + return bmc150_accel_core_remove(&client->dev);
> > +}
> > +
> > +static const struct acpi_device_id bmc150_accel_acpi_match[] = {
> > + {"BSBA0150", bmc150},
> > + {"BMC150A", bmc150},
> > + {"BMI055A", bmi055},
> > + {"BMA0255", bma255},
> > + {"BMA250E", bma250e},
> > + {"BMA222E", bma222e},
> > + {"BMA0280", bma280},
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
> > +
> > +static const struct i2c_device_id bmc150_accel_id[] = {
> > + {"bmc150_accel", bmc150},
> > + {"bmi055_accel", bmi055},
> > + {"bma255", bma255},
> > + {"bma250e", bma250e},
> > + {"bma222e", bma222e},
> > + {"bma280", bma280},
> > + {}
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
> > +
> > +static struct i2c_driver bmc150_accel_driver = {
> > + .driver = {
> > + .name = "bmc150_accel_i2c",
> > + .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
> > + .pm = &bmc150_accel_pm_ops,
> > + },
> > + .probe = bmc150_accel_probe,
> > + .remove = bmc150_accel_remove,
> > + .id_table = bmc150_accel_id,
> > +};
> > +module_i2c_driver(bmc150_accel_driver);
> > +
> > +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("BMC150 I2C accelerometer driver");
> > diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h
> > new file mode 100644
> > index 000000000000..988b57573d0c
> > --- /dev/null
> > +++ b/drivers/iio/accel/bmc150-accel.h
> > @@ -0,0 +1,21 @@
> > +#ifndef _BMC150_ACCEL_H_
> > +#define _BMC150_ACCEL_H_
> > +
> > +struct regmap;
> > +
> > +enum {
> > + bmc150,
> > + bmi055,
> > + bma255,
> > + bma250e,
> > + bma222e,
> > + bma280,
> > +};
> > +
> > +int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
> > + const char *name, int chip_id,
> > + bool block_supported);
> > +int bmc150_accel_core_remove(struct device *dev);
> > +extern const struct dev_pm_ops bmc150_accel_pm_ops;
> > +
> > +#endif /* _BMC150_ACCEL_H_ */
> >
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists